Author: maks Date: Sat Jul 28 13:30:06 2007 New Revision: 9213 Log: topconfig: move scsi block up no functional change
Modified: dists/trunk/linux-2.6/debian/config/config Modified: dists/trunk/linux-2.6/debian/config/config ============================================================================== --- dists/trunk/linux-2.6/debian/config/config (original) +++ dists/trunk/linux-2.6/debian/config/config Sat Jul 28 13:30:06 2007 @@ -532,6 +532,80 @@ CONFIG_BLK_DEV_RAM_COUNT=16 # +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=m +CONFIG_SCSI_TGT=m +CONFIG_SCSI_NETLINK=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set + +# +# SCSI low-level drivers +# +CONFIG_ISCSI_TCP=m +CONFIG_BLK_DEV_3W_XXXX_RAID=m +CONFIG_SCSI_3W_9XXX=m +CONFIG_SCSI_7000FASST=m +CONFIG_SCSI_ACARD=m +CONFIG_SCSI_AHA152X=m +CONFIG_SCSI_AHA1542=m +CONFIG_SCSI_AHA1740=m +CONFIG_SCSI_AACRAID=m +CONFIG_SCSI_AIC7XXX=m +CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 +CONFIG_AIC7XXX_RESET_DELAY_MS=15000 +CONFIG_AIC7XXX_DEBUG_ENABLE=y +CONFIG_AIC7XXX_DEBUG_MASK=0 +CONFIG_AIC7XXX_REG_PRETTY_PRINT=y +CONFIG_SCSI_AIC7XXX_OLD=m +CONFIG_SCSI_AIC79XX=m +CONFIG_AIC79XX_CMDS_PER_DEVICE=32 +CONFIG_AIC79XX_RESET_DELAY_MS=15000 +CONFIG_AIC79XX_DEBUG_ENABLE=y +CONFIG_AIC79XX_DEBUG_MASK=0 +CONFIG_AIC79XX_REG_PRETTY_PRINT=y +CONFIG_SCSI_AIC94XX=m +# CONFIG_AIC94XX_DEBUG is not set +CONFIG_MEGARAID_SAS=m +CONFIG_SCSI_STEX=m +CONFIG_SCSI_SYM53C8XX_MMIO=y +# CONFIG_SCSI_IPR is not set +CONFIG_SCSI_HPTIOP=m +CONFIG_SCSI_QLA_FC=m +CONFIG_SCSI_QLA_ISCSI=m +CONFIG_SCSI_SRP=m + +# # Multi-device support (RAID and LVM) # CONFIG_MD=y @@ -1221,80 +1295,6 @@ CONFIG_NFS_COMMON=y CONFIG_USB_MON=y -# -# SCSI device support -# -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_SCSI_TGT=m -CONFIG_SCSI_NETLINK=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set - -# -# SCSI low-level drivers -# -CONFIG_ISCSI_TCP=m -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_3W_9XXX=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_DEBUG_ENABLE=y -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC7XXX_OLD=m -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -CONFIG_AIC79XX_DEBUG_ENABLE=y -CONFIG_AIC79XX_DEBUG_MASK=0 -CONFIG_AIC79XX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -CONFIG_MEGARAID_SAS=m -CONFIG_SCSI_STEX=m -CONFIG_SCSI_SYM53C8XX_MMIO=y -# CONFIG_SCSI_IPR is not set -CONFIG_SCSI_HPTIOP=m -CONFIG_SCSI_QLA_FC=m -CONFIG_SCSI_QLA_ISCSI=m -CONFIG_SCSI_SRP=m - CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m _______________________________________________ Kernel-svn-changes mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/kernel-svn-changes
