Author: waldi
Date: Thu Oct 25 22:17:50 2007
New Revision: 9677
Log:
* debian/changelog: Update.
* debian/patches/debian/dfsg/drivers-net-tg3-fix-simple.patch: Add.
* debian/patches/series/1~experimental.1: Update.
Added:
dists/trunk/linux-2.6/debian/patches/debian/dfsg/drivers-net-tg3-fix-simple.patch
Modified:
dists/trunk/linux-2.6/debian/changelog
dists/trunk/linux-2.6/debian/patches/series/1~experimental.1
Modified: dists/trunk/linux-2.6/debian/changelog
==============================================================================
--- dists/trunk/linux-2.6/debian/changelog (original)
+++ dists/trunk/linux-2.6/debian/changelog Thu Oct 25 22:17:50 2007
@@ -71,7 +71,6 @@
- Broadcom NetXtremeII support
* Disable now broken drivers:
- Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support
- - Broadcom Tigon3 support
- USB Keyspan USA-xxx Serial Driver
- Technotrend/Hauppauge Nova-USB devices
- YAM driver for AX.25
@@ -102,7 +101,7 @@
[ dann frazier ]
* [ia64] Re-enable various unintentionally disabled config options
- -- Bastian Blank <[EMAIL PROTECTED]> Sun, 14 Oct 2007 16:23:53 +0200
+ -- Bastian Blank <[EMAIL PROTECTED]> Fri, 26 Oct 2007 00:15:41 +0200
linux-2.6 (2.6.22-5) unstable; urgency=low
Added:
dists/trunk/linux-2.6/debian/patches/debian/dfsg/drivers-net-tg3-fix-simple.patch
==============================================================================
--- (empty file)
+++
dists/trunk/linux-2.6/debian/patches/debian/dfsg/drivers-net-tg3-fix-simple.patch
Thu Oct 25 22:17:50 2007
@@ -0,0 +1,283 @@
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -2229,7 +2229,6 @@
+
+ config TIGON3
+ tristate "Broadcom Tigon3 support"
+- depends on BROKEN
+ depends on PCI
+ help
+ This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
+--- a/drivers/net/tg3.c
++++ b/drivers/net/tg3.c
+@@ -5124,11 +5124,6 @@
+ }
+
+
+-#define RX_CPU_SCRATCH_BASE 0x30000
+-#define RX_CPU_SCRATCH_SIZE 0x04000
+-#define TX_CPU_SCRATCH_BASE 0x34000
+-#define TX_CPU_SCRATCH_SIZE 0x04000
+-
+ /* tp->lock is held. */
+ static int tg3_halt_cpu(struct tg3 *tp, u32 offset)
+ {
+@@ -5177,205 +5172,6 @@
+ return 0;
+ }
+
+-struct fw_info {
+- unsigned int text_base;
+- unsigned int text_len;
+- const u32 *text_data;
+- unsigned int rodata_base;
+- unsigned int rodata_len;
+- const u32 *rodata_data;
+- unsigned int data_base;
+- unsigned int data_len;
+- const u32 *data_data;
+-};
+-
+-/* tp->lock is held. */
+-static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32
cpu_scratch_base,
+- int cpu_scratch_size, struct fw_info *info)
+-{
+- int err, lock_err, i;
+- void (*write_op)(struct tg3 *, u32, u32);
+-
+- if (cpu_base == TX_CPU_BASE &&
+- (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+- printk(KERN_ERR PFX "tg3_load_firmware_cpu: Trying to load "
+- "TX cpu firmware on %s which is 5705.\n",
+- tp->dev->name);
+- return -EINVAL;
+- }
+-
+- if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
+- write_op = tg3_write_mem;
+- else
+- write_op = tg3_write_indirect_reg32;
+-
+- /* It is possible that bootcode is still loading at this point.
+- * Get the nvram lock first before halting the cpu.
+- */
+- lock_err = tg3_nvram_lock(tp);
+- err = tg3_halt_cpu(tp, cpu_base);
+- if (!lock_err)
+- tg3_nvram_unlock(tp);
+- if (err)
+- goto out;
+-
+- for (i = 0; i < cpu_scratch_size; i += sizeof(u32))
+- write_op(tp, cpu_scratch_base + i, 0);
+- tw32(cpu_base + CPU_STATE, 0xffffffff);
+- tw32(cpu_base + CPU_MODE, tr32(cpu_base+CPU_MODE)|CPU_MODE_HALT);
+- for (i = 0; i < (info->text_len / sizeof(u32)); i++)
+- write_op(tp, (cpu_scratch_base +
+- (info->text_base & 0xffff) +
+- (i * sizeof(u32))),
+- (info->text_data ?
+- info->text_data[i] : 0));
+- for (i = 0; i < (info->rodata_len / sizeof(u32)); i++)
+- write_op(tp, (cpu_scratch_base +
+- (info->rodata_base & 0xffff) +
+- (i * sizeof(u32))),
+- (info->rodata_data ?
+- info->rodata_data[i] : 0));
+- for (i = 0; i < (info->data_len / sizeof(u32)); i++)
+- write_op(tp, (cpu_scratch_base +
+- (info->data_base & 0xffff) +
+- (i * sizeof(u32))),
+- (info->data_data ?
+- info->data_data[i] : 0));
+-
+- err = 0;
+-
+-out:
+- return err;
+-}
+-
+-/* tp->lock is held. */
+-static int tg3_load_5701_a0_firmware_fix(struct tg3 *tp)
+-{
+- struct fw_info info;
+- int err, i;
+-
+- info.text_base = TG3_FW_TEXT_ADDR;
+- info.text_len = TG3_FW_TEXT_LEN;
+- info.text_data = &tg3FwText[0];
+- info.rodata_base = TG3_FW_RODATA_ADDR;
+- info.rodata_len = TG3_FW_RODATA_LEN;
+- info.rodata_data = &tg3FwRodata[0];
+- info.data_base = TG3_FW_DATA_ADDR;
+- info.data_len = TG3_FW_DATA_LEN;
+- info.data_data = NULL;
+-
+- err = tg3_load_firmware_cpu(tp, RX_CPU_BASE,
+- RX_CPU_SCRATCH_BASE, RX_CPU_SCRATCH_SIZE,
+- &info);
+- if (err)
+- return err;
+-
+- err = tg3_load_firmware_cpu(tp, TX_CPU_BASE,
+- TX_CPU_SCRATCH_BASE, TX_CPU_SCRATCH_SIZE,
+- &info);
+- if (err)
+- return err;
+-
+- /* Now startup only the RX cpu. */
+- tw32(RX_CPU_BASE + CPU_STATE, 0xffffffff);
+- tw32_f(RX_CPU_BASE + CPU_PC, TG3_FW_TEXT_ADDR);
+-
+- for (i = 0; i < 5; i++) {
+- if (tr32(RX_CPU_BASE + CPU_PC) == TG3_FW_TEXT_ADDR)
+- break;
+- tw32(RX_CPU_BASE + CPU_STATE, 0xffffffff);
+- tw32(RX_CPU_BASE + CPU_MODE, CPU_MODE_HALT);
+- tw32_f(RX_CPU_BASE + CPU_PC, TG3_FW_TEXT_ADDR);
+- udelay(1000);
+- }
+- if (i >= 5) {
+- printk(KERN_ERR PFX "tg3_load_firmware fails for %s "
+- "to set RX CPU PC, is %08x should be %08x\n",
+- tp->dev->name, tr32(RX_CPU_BASE + CPU_PC),
+- TG3_FW_TEXT_ADDR);
+- return -ENODEV;
+- }
+- tw32(RX_CPU_BASE + CPU_STATE, 0xffffffff);
+- tw32_f(RX_CPU_BASE + CPU_MODE, 0x00000000);
+-
+- return 0;
+-}
+-
+-
+-
+-/* tp->lock is held. */
+-static int tg3_load_tso_firmware(struct tg3 *tp)
+-{
+- struct fw_info info;
+- unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
+- int err, i;
+-
+- if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
+- return 0;
+-
+- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
+- info.text_base = TG3_TSO5_FW_TEXT_ADDR;
+- info.text_len = TG3_TSO5_FW_TEXT_LEN;
+- info.text_data = &tg3Tso5FwText[0];
+- info.rodata_base = TG3_TSO5_FW_RODATA_ADDR;
+- info.rodata_len = TG3_TSO5_FW_RODATA_LEN;
+- info.rodata_data = &tg3Tso5FwRodata[0];
+- info.data_base = TG3_TSO5_FW_DATA_ADDR;
+- info.data_len = TG3_TSO5_FW_DATA_LEN;
+- info.data_data = &tg3Tso5FwData[0];
+- cpu_base = RX_CPU_BASE;
+- cpu_scratch_base = NIC_SRAM_MBUF_POOL_BASE5705;
+- cpu_scratch_size = (info.text_len +
+- info.rodata_len +
+- info.data_len +
+- TG3_TSO5_FW_SBSS_LEN +
+- TG3_TSO5_FW_BSS_LEN);
+- } else {
+- info.text_base = TG3_TSO_FW_TEXT_ADDR;
+- info.text_len = TG3_TSO_FW_TEXT_LEN;
+- info.text_data = &tg3TsoFwText[0];
+- info.rodata_base = TG3_TSO_FW_RODATA_ADDR;
+- info.rodata_len = TG3_TSO_FW_RODATA_LEN;
+- info.rodata_data = &tg3TsoFwRodata[0];
+- info.data_base = TG3_TSO_FW_DATA_ADDR;
+- info.data_len = TG3_TSO_FW_DATA_LEN;
+- info.data_data = &tg3TsoFwData[0];
+- cpu_base = TX_CPU_BASE;
+- cpu_scratch_base = TX_CPU_SCRATCH_BASE;
+- cpu_scratch_size = TX_CPU_SCRATCH_SIZE;
+- }
+-
+- err = tg3_load_firmware_cpu(tp, cpu_base,
+- cpu_scratch_base, cpu_scratch_size,
+- &info);
+- if (err)
+- return err;
+-
+- /* Now startup the cpu. */
+- tw32(cpu_base + CPU_STATE, 0xffffffff);
+- tw32_f(cpu_base + CPU_PC, info.text_base);
+-
+- for (i = 0; i < 5; i++) {
+- if (tr32(cpu_base + CPU_PC) == info.text_base)
+- break;
+- tw32(cpu_base + CPU_STATE, 0xffffffff);
+- tw32(cpu_base + CPU_MODE, CPU_MODE_HALT);
+- tw32_f(cpu_base + CPU_PC, info.text_base);
+- udelay(1000);
+- }
+- if (i >= 5) {
+- printk(KERN_ERR PFX "tg3_load_tso_firmware fails for %s "
+- "to set CPU PC, is %08x should be %08x\n",
+- tp->dev->name, tr32(cpu_base + CPU_PC),
+- info.text_base);
+- return -ENODEV;
+- }
+- tw32(cpu_base + CPU_STATE, 0xffffffff);
+- tw32_f(cpu_base + CPU_MODE, 0x00000000);
+- return 0;
+-}
+-
+-
+ /* tp->lock is held. */
+ static void __tg3_set_mac_addr(struct tg3 *tp, int skip_mac_1)
+ {
+@@ -5590,18 +5386,8 @@
+ tw32(BUFMGR_DMA_DESC_POOL_SIZE, NIC_SRAM_DMA_DESC_POOL_SIZE);
+ }
+ else if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) {
+- int fw_len;
+-
+- fw_len = (TG3_TSO5_FW_TEXT_LEN +
+- TG3_TSO5_FW_RODATA_LEN +
+- TG3_TSO5_FW_DATA_LEN +
+- TG3_TSO5_FW_SBSS_LEN +
+- TG3_TSO5_FW_BSS_LEN);
+- fw_len = (fw_len + (0x80 - 1)) & ~(0x80 - 1);
+- tw32(BUFMGR_MB_POOL_ADDR,
+- NIC_SRAM_MBUF_POOL_BASE5705 + fw_len);
+- tw32(BUFMGR_MB_POOL_SIZE,
+- NIC_SRAM_MBUF_POOL_SIZE5705 - fw_len - 0xa00);
++ tw32(BUFMGR_MB_POOL_ADDR, NIC_SRAM_MBUF_POOL_BASE5705);
++ tw32(BUFMGR_MB_POOL_SIZE, NIC_SRAM_MBUF_POOL_SIZE5705 - 0xa00);
+ }
+
+ if (tp->dev->mtu <= ETH_DATA_LEN) {
+@@ -5980,18 +5766,6 @@
+ tw32(SNDBDI_MODE, SNDBDI_MODE_ENABLE | SNDBDI_MODE_ATTN_ENABLE);
+ tw32(SNDBDS_MODE, SNDBDS_MODE_ENABLE | SNDBDS_MODE_ATTN_ENABLE);
+
+- if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) {
+- err = tg3_load_5701_a0_firmware_fix(tp);
+- if (err)
+- return err;
+- }
+-
+- if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) {
+- err = tg3_load_tso_firmware(tp);
+- if (err)
+- return err;
+- }
+-
+ tp->tx_mode = TX_MODE_ENABLE;
+ tw32_f(MAC_TX_MODE, tp->tx_mode);
+ udelay(100);
+@@ -11284,6 +11058,12 @@
+ goto err_out_iounmap;
+ }
+
++ if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) {
++ printk(KERN_ERR PFX "5701 A0 firmware fix not available,
aborting.\n");
++ err = -ENODEV;
++ goto err_out_iounmap;
++ }
++
+ /* The EPB bridge inside 5714, 5715, and 5780 and any
+ * device behind the EPB cannot support DMA addresses > 40-bit.
+ * On 64-bit systems with IOMMU, use 40-bit dma_mask.
Modified: dists/trunk/linux-2.6/debian/patches/series/1~experimental.1
==============================================================================
--- dists/trunk/linux-2.6/debian/patches/series/1~experimental.1
(original)
+++ dists/trunk/linux-2.6/debian/patches/series/1~experimental.1 Thu Oct
25 22:17:50 2007
@@ -7,6 +7,8 @@
+ debian/drivers-ata-ata_piix-postpone-pata.patch
++ debian/dfsg/drivers-net-tg3-fix-simple.patch
+
+ bugfix/powerpc/build-links.patch
+ bugfix/powerpc/mv643xx-hotplug-support.patch
+ bugfix/powerpc/oldworld-boot-fix.patch
_______________________________________________
Kernel-svn-changes mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/kernel-svn-changes
