On Fri, 1 Jun 2007 10:34:24 -0700 (PDT)
Matthew Dillon <[EMAIL PROTECTED]> wrote:
> : How about PREVIEW ?
> :
>
> Good call! I have updated the preview tag to the latest HEAD.
OK updated and tried nata on my A8V based box with two opticals and
a SATA hard disk - I got a boot time trap (output and trace with arguments
elided below - if the trace arguments would help I can probably do it again
and type them up):
kbd0 at atkbd0
kernel trap 12 with interrupts disabled
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x0
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc03c05fc
stack pointer = 0x10:0xc059b76c
frame pointer = 0x10:0xc059b784
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = resume, IOPL = 0
current process = 0 (swapper)
current thread = pri 12
kernel: type 12 trap, code=0
Stopped at sccnputc+0x82: xmpi $0,0(%eac,%ecx,4)
db>trace
sccnputc
cnputc
kputchar
kvcprintf
kprintf
device_print_prettyname
device_printf
bus_print_child_header
isa_print_child
device_print_child
device_probe_and_attach
isa_probe_children
configure
mi_startup
begin
Finally from a boot with the ata kernel:
bash-3.2$ dmesg | grep ata
atapci0: <VIA 8237 SATA 150 controller> port
0xa400-0xa4ff,0xa800-0xa80f,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xc000-0xc007
irq 10 at device 15.0 on pci0
ata2: at 0xc000 on atapci0
ad4: 286168MB <ST3300622AS> [581421/16/63] at ata2-master UDMA33
ata3: at 0xb400 on atapci0
atapci1: <VIA 8237 ATA133 controller> port 0xfc00-0xfc0f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
acd0: DVD-R <HL-DT-ST DVDRAM GSA-4163B> at ata0-master UDMA33
ata1: at 0x170 irq 15 on atapci1
acd1: DVD-ROM <LITE-ON DVD SOHD-167T> at ata1-master UDMA33
cd1 at ata1 bus 0 target 0 lun 0
cd0 at ata0 bus 0 target 0 lun 0
--
C:>WIN | Directable Mirror Arrays
The computer obeys and wins. | A better way to focus the sun
You lose and Bill collects. | licences available see
| http://www.sohara.org/
