On Mon, 16 Mar 2009 20:59:18 Hasso Tepper wrote: > pass* root:operator 660 # MAKEDEV(8) default is 600 > cd* root:operator 660 > xpt* root:operator 660
Thanks Hasso, Ive done that. The permissions are set to that, but this error is same, even when i try to burn as root. I cannot imagine what else it would be but a bug in DragonFly. Buring in DragonFly only seems to work with CDs (ive successfully burnt CD iso images at least) This is a 4.1gb DVD iso, trying to burn to DVD+R disk. cdrecord-ossdvd produces an even nastier error9(at the bottom). It actually ruined the disk too: p...@elevator:/tmp/kde-petr# cdrecord dev=3,0,0 K3b\ data\ project.iso cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. cdrecord: Continuing in 5 seconds... Cdrecord-Clone 2.01.01a04 (--) Copyright (C) 1995-2006 Jörg Schilling NOTE: this is OSS DVD extensions for cdrtools and thus may have bugs related to DVD issues that are not present in the original cdrtools. For more information see http://crashrecovery.org/oss-dvd.html. The original cdrtools author should not be bothered with problems in this version. scsidev: '3,0,0' scsibus: 3 target: 0 lun: 0 Using libscg version 'schily-0.8'. Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'PIONEER ' Identifikation : 'DVD-RW DVR-109 ' Revision : '1.57' Device seems to be: Generic mmc2 DVD-R/DVD-RW. cdrecord: Found DVD media: using cdr_mdvd. Using Session At Once (SAO) for DVD mode. Using Session At Once (SAO) for DVD mode. Using Session At Once (SAO) for DVD mode. Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO scsi_set_streaming Speed set to 16620 KB/s Starting to write CD/DVD at speed 13.0 in real unknown mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. trackno=0 cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 03 07 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 71 00 03 FF FF FE 20 0E 00 00 00 00 0C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x3 Medium Error, deferred error, Segment 0 Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 Sense flags: Blk -480 (not valid) cmd finished after 0.000s timeout 40s write track data: error after 1587200 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above. This DVD drive works on every system (FreeBSD, Linux, Windows) Ive tried it on. Petr
