:Are you using a RAID-0 (striping) here? Or is there a way to tell dumpon to
:use
:more than one device for swap caching?
The swap work I did many years ago before DFly split off hasn't changed
in all tha time. It automatically uses 64K stripes and supports up
to four swap devices. Total swap space is limited on 32-bit builds
(defaults to 32G, can be raised higher but you risk blowing out KVM).
On 64-bit builds tota swap space is limited to 512G by default and
can be raised up to a terrabyte if desired.
:I'd expect random reads from files to profit much more than linear reads
:when
:compared against hard disks. Do you share this assumption? Do you have any
:numbers on this kind of benchmark? Can you think of any other real-world
:benchmarks that would make sense to execute on such a machine?
:I could do some testing on a big machine, equipped with 2x120 GB SSD, once
:I
:get the network controller to work (82576 Intel PRO/1000 not working on
:DragonFly).
:
:Regards,
:
: Michael
Theoretically SSDs should scale the performance for both linear and
random IO. For a SSD since 'seeks' aren't a big factor it doesn't
really matter whether a small or large stripe size is used. i.e.
you don't get penalized for splitting a large I/O across two devices
whether random or linear.
In reality even a SSD appears performs slightly less well when doing
less linear IO. I was really hoping to get 400MB/s in my test but
I only got 300MB/s. Relative to a HD the SSDs performance loss for
random IO is minor. i.e. for a HD random IO can cut the IOPS by a
factor of 10. For a SSD random IO only seems to cut the IOPS by 25%
(factor of 1.3x).
The SSD vendors seem to want to make a big deal about the IOPS rate
for small random IOs but I've never been able to even approached the
maximum IOPS rate specced. The reason is that the vendors are assuming
stupidly low block sizes (like 512 bytes) for their IOPS numbers while
no modern machine uses a block size less than 4K. The swapcache code
uses a blocksize in the 16-64K range. So IOPS limitations are
irrelevant.
AHCI's NCQ seems to give the Intels an edge over the OCZ. It adds at
least another 50MB/sec to the SSDs performance. I still can't believe
the OCZ doesn't do NCQ, what a let-down.
-Matt
Matthew Dillon
<dil...@backplane.com>
