Am 05.09.2010 um 11:33 schrieb Damian Lubosch: > Hello! > > I just checked the memory status of my new Dragonfly-based server. > > the top command prints out: > load averages: 0.00, 0.00, 0.00; up 19+12:15:40 > 09:29:28 > 38 processes: 38 running > 95653tates: 0.0% user, 0.0% nice, 0.0% system, 0.8% interrupt, 99.2% idle > Memory: 6598M Active, 3152M Inact, 1628M Wired, 186M Cache, 399M Buf, 283M > Free
I uploaded the src-directory to http://pick.xiqit.de/src.tgz (so you can see the changes that were made to the sources, but it's about 450MB) The last dmesg logs show: (complete dmesg http://pick.xiqit.de/dmesg.log the first lines can be ignored, it was a stresstest made by stress2) ... twa0: tw_cli_scsi_complete: req_id = 0x2f, status = 0x2 twa0: tw_cli_scsi_complete: req_id = 0x30, status = 0x2 twa0: tw_cli_scsi_complete: req_id = 0x31, status = 0x2 CAM: finished configuring all busses (0 left) no B_DEVMAGIC (bootdev=0) da0 at twa0 bus 0 target 0 lun 0 da0: <AMCC 9650SE-4LP DISK 4.08> Fixed Direct Access SCSI-5 device da0: Serial Number 9VS3WZHT482E2100BCC3 da0: 100.000MB/s transfers da0: 1430501MB (2929666048 512 byte sectors: 255H 63S/T 182363C) Mounting root from hammer:serno/9VS3WZHT482E2100BCC3.s1d tryroot serno/9VS3WZHT482E2100BCC3.s1d HAMMER(ROOT) recovery check seqno=0596b141 HAMMER(ROOT) recovery range 3000000005569098-3000000005569098 HAMMER(ROOT) recovery nexto 3000000005569098 endseqno=0596b142 HAMMER(ROOT) mounted clean, no recovery needed Mounting devfs twa0: INFO: (0x04: 0x0029): Verify started: unit=0 twa0: INFO: (0x04: 0x002B): Verify completed: unit=0 Warning: pmap_interlock 0xfffffffe638e0ee0 0001000d twa0: INFO: (0x04: 0x0029): Verify started: unit=0 twa0: INFO: (0x04: 0x002B): Verify completed: unit=0 twa0: INFO: (0x04: 0x0029): Verify started: unit=0 twa0: INFO: (0x04: 0x002B): Verify completed: unit=0 I am wondering about the pmap_interlock warning... Many thanks, Damian
