On 8/12/20 8:56 PM, GitLab Bridge on behalf of jeremycline wrote: > From: Fedora Kernel Team <[email protected]> > > Hi, > > As part of the ongoing rebase effort, the following configuration > options need to be reviewed. > > As a reminder, the ARK configuration flow involves moving unreviewed > configuration options from the pending directory to the ark directory. > In the diff below, options are removed from the pending directory and > added to the ark hierarchy. The final options that need to be ACKed > are the files that are being added to the ark hierarchy. > > If the value for a file that is added should be changed, please reply > with a better option. > > CONFIG_INV_ICM42600_I2C: > > This driver supports the InvenSense ICM-426xx motion tracking > devices over I2C. > > This driver can be built as a module. The module will be called > inv-icm42600-i2c. > > Symbol: INV_ICM42600_I2C [=n] > Type : tristate > Defined at drivers/iio/imu/inv_icm42600/Kconfig:7 > Prompt: InvenSense ICM-426xx I2C driver > Depends on: IIO [=m] && I2C [=y] > Location: > -> Device Drivers > -> Industrial I/O support (IIO [=m]) > -> Inertial measurement units > Selects: INV_ICM42600 [=n] && REGMAP_I2C [=m] >
Acked-by: Prarit Bhargava <[email protected]> P. _______________________________________________ kernel mailing list -- [email protected] To unsubscribe send an email to [email protected] Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/[email protected]
