Hi,




  The instructions in 
'http://processors.wiki.ti.com/index.php/Creating_a_Root_File_System_for_Linux_on_OMAP35x'
 works fine, I just did not configured the busybox as per this
website. Previously, I used the default configuration of busybox (where
all options are enabled by default). Now when I configure the busybox
as per this above mentioned link, the ramdisk works fine.



Closing this thread.



Thanks & Regards,

D.Giriprasad


--- On Fri, 21/1/11, Giriprasad Deviprasad <[email protected]> wrote:

From: Giriprasad Deviprasad <[email protected]>
Subject: Ramdisk not working on Hawkboard
To: [email protected]
Date: Friday, 21 January, 2011, 8:30 AM

Hi,

I am creating ram disk as in : 
http://processors.wiki.ti.com/index.php/Creating_a_Root_File_System_for_Linux_on_OMAP35x

I compiled the linux-omap kernel using 
(http://hawkboard.googlecode.com/files/linux-omapl1_ver1.tar.bz2), with the 
kernel parameters as described in the first link as above:
make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- uImage_v2

cp arch/arm/boot/Image_v2 /tftpboot/uImage_v2

Then I did:
setenv bootargs mem=88M ip=dhcp console=ttyS0,115200n8 root=/dev/ram0 rw 
initrd=0xc1180000,16M ramdisk_size=16384
saveenv
tftp c0000000 uImage_v2
tftp c1180000 rd-ext2.bin
bootm c0000000

It errors:
hawkboard.org > bootm c0000000          
AIS U-BootLoader is already flashed
Wrong Image Format for bootm command
ERROR: can't get kernel
 image!

any clues why?

This from http://elinux.org/Hawkboard works fine, though, with the default ram 
disk on hawkboard.org:
http://hawkboard.googlecode.com/files/linux-omapl1_ver1.tar.bz2

 make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- distclean
  make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- 
omapl138_hawkboard_defconfig

  make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- uImage


Regards,
D.Giriprasad

-----Inline Attachment Follows-----

_______________________________________________
Kernelnewbies mailing list
[email protected]
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies


_______________________________________________
Kernelnewbies mailing list
[email protected]
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

Reply via email to