>On Wed, Jul 6, 2011 at 3:59 PM, jiangtao.jit <[email protected]> wrote: >> dear all: >> >> i have a x86 PC and i use it as a router >> the kernel is 2.6.38 >> >> there are two NICs: eth0 and eth1 >>
>Can you show the interface configs for both the NICS and the Bridge? dear Sunny: these are the commands i used 1.i use ifconfig eth0 0.0.0.0 cleared the eth0's ip 2.brctl addbr br0 3.brctl addif br0 eth0 4.ifconfig br0 10.1.0.1 5.brctl show like bridge name bridge id STP enabled interfaces br0 no eth0 6.route like Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.0 * 255.0.0.0 U 0 0 0 br0 11.0.0.0 * 255.0.0.0 U 0 0 0 eth1 default 11.1.0.2 0.0.0.0 UG 0 0 0 eth1 are these info useful? thanks --------------------- 2011-07-06 jiangtao.jit _______________________________________________ Kernelnewbies mailing list [email protected] http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
