Hi Mukesh.. On Wed, Dec 21, 2011 at 01:38, Mukesh Yadav <[email protected]> wrote: > BPF filters used are: > Even IP filter :-> tcpdump -i interface 'ether dst <dest mac> && ip[19] & > 0x01 = 0' > Odd IP filter :-> tcpdump -i interface 'ether dst <dest mac> && ip[19] & > 0x01 = 1' > > There is a packet loss for odd IP thread even when CPU is available. Reason > being packet drop due recv buffer full. > Same amount of traffic is well handled by even IP thread(user code being > same in both), scaling CPU to full 100%. > > In odd IP thread, If filter is changed to "tcpdump -i interface 'ether dst > <dest mac> && ip proto 17' ", all goes fine. > Also CPU usage at kernel drops from 50% to 4 % for a particular amount of > traffic.
I have zero experience with BPF, so this is just my theory. In kernel level, (or maybe between kernel and user level), by putting your odd and even filter, kernel work too hard to separate the packets into different "queue" or "channel"...or something like that. While in the mean time, incoming packets are bursting .... This makes buffers filled up fast. How about this... just filter anything that match your target MAC....fed this up to the user level application and let your application do the odd and even IP filtering? -- regards, Mulyadi Santosa Freelance Linux trainer and consultant blog: the-hydra.blogspot.com training: mulyaditraining.blogspot.com _______________________________________________ Kernelnewbies mailing list [email protected] http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
