Sertac, Also, if u know ur chip SoC name, u can find whether open source linux kernel may have already support inbuilt in it. u can google around it, before deciding to port.
On Thu, Jun 7, 2012 at 5:18 PM, Harishkumar V <[email protected]>wrote: > Sertac, > > From your present source, u can find the Celestial SoC change. > check for arch/arm folder. > > then in corresponding drivers, like usb,serial,video etc. > > > > > > On Thu, Jun 7, 2012 at 4:36 PM, Sertac TULLUK <[email protected]>wrote: > >> ** >> Dear Harishkumar; >> >> Thank you very much for your quick answer. >> >> Where can I find related Celestial SoC & driver patch file? >> >> Best Regards >> >> Sertac >> >> ----- Original Message ----- >> *From:* Harishkumar V <[email protected]> >> *To:* Sertac TULLUK <[email protected]> >> *Cc:* [email protected] >> *Sent:* Thursday, June 07, 2012 1:31 PM >> *Subject:* Re: New kernel for Chipbox >> >> Sertac, >> >> Basically u need to have Celestial SoC & drivers related patch. >> Then, u can download desired kernel or latest 3.3.x. >> >> Apply and do the forward porting. It won't be straight forward, u need to >> re-write a bit. >> U can always refer any other celectial SoC family in latest kernel source >> or other ARM9 family. >> >> see -> arch/arm/ >> >> On Thu, Jun 7, 2012 at 2:36 PM, Sertac TULLUK >> <[email protected]>wrote: >> >>> ** >>> Dear All; >>> >>> I have a digital satellite receiver (named Chipbox), which uses linux >>> kernel 2.6.12.5. >>> >>> Main chipset name is Celestial CSM1203 ( It is ARM926EJ-S core). >>> >>> The original kernel source (and all other sources) can be downloaded >>> here: http://www.merihvideo.com.tr/chipbox-source.php >>> >>> I would like to add some functionality (Such as CIFS, USB WIFI...) to my >>> STB. In order to do that, I need to cross compile new kernel. >>> >>> However, the chipset provider ( Celestial) does not provide a new kernel >>> to do this. They just compiled 2.6.12.5 for about 5-6 years ago, and they >>> didn't do a new kernel from that time. >>> >>> So, I need your helps: >>> >>> 1) Celestial has done a lot of modifications on the original 2.6.12.5 >>> source ( drivers, headers, definitions...) All these changes can be seen by >>> using MELD tool. >>> >>> 2) In order to have a new kernel ( Such as 2.6.35.13) which can be >>> running on my chipbox, what are the steps should be done one by one? >>> >>> Can you please explain for a newbie please? >>> >>> Best Regards >>> >>> Sertac >>> >>> _______________________________________________ >>> Kernelnewbies mailing list >>> [email protected] >>> http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies >>> >>> >> >> >> -- >> Thanks and Regards, >> Harish Kumar. V >> >> ------------------------------ >> >> _______________________________________________ >> Kernelnewbies mailing list >> [email protected] >> http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies >> >> > > > -- > Thanks and Regards, > Harish Kumar. V > -- Thanks and Regards, Harish Kumar. V
_______________________________________________ Kernelnewbies mailing list [email protected] http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
