Hi, Pranay. Thanks for having a look.
On Tuesday, June 24, 2014 13:42:35 Pranay Srivastava wrote: > > I looked at uart_register code, it seems there's no read callback so > that's why you are getting that -EIO. From what I understand, I'm supposed to set up the interrupts needed in the startup function which is called when the device is opened. This never happens though, as adding a printk results in no output. > I think you can put this call in your start_tx since uart_start is > calling port->start_tx at the end so i guess you should be good there. I suspect that start_tx is not getting called since adding a printk in my start_tx function doesn't result in any output. > > I don't have much idea how will you read from it though. I'm able to read from it by waiting for a rising edge interrupt and then bit- banging the GPIO line in userspace, though at a slow baud that is unusable. I need 9600 to read from my device :)
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ Kernelnewbies mailing list [email protected] http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
