Hello , I perform the following steps to run linux kernel on imx6:
Download 3.18 kernel from www.kernel.org Make steps: make CROSSarm-linux-gnueabi- ARCH=arm imx_v6_v7_defconfig make CROSS_COMPILE=arm-linux-gnueabi- ARCH=arm uImage LOADADDR=10001000 cp linux-3.18.4/arch/arm/boot/uImage Sd_card Run uImage on the imx6 board... Output : ## Booting kernel from Legacy Image at 10800000 ... Image Name: Linux-3.18.4 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5445640 Bytes = 5.2 MB Load Address: 10001000 Entry Point: 10001000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... what could be the problem in this ? why Is this kernel not able start on imx6 platform ? Thanks in advance, Regards, Chirag Garg IIT Madras , Rise Lab On Mon, Mar 9, 2015 at 11:01 PM, <[email protected]> wrote: > Hello, > > On 15-03-09 21:53:34, chirag garg wrote: > > Hello, > > > > On Mon, Mar 9, 2015 at 9:01 PM, <[email protected]> wrote: > > > > > Hello, > > > > > > On 15-03-09 11:20:55, chirag garg wrote: > > > > Hi all, > > > > > > > > I am new to the linux kernel source code. I want to compile linux > source > > > > code for imx6 ARM based platform. > > > > I want to generate raw binary image (.bin file) and .dtb file. Can > any > > > one > > > > help me in this.? > > > > > > Which iMX6 platform is this? Depending on the platform, it would be as > > > simple as doing make imx_v6_v7_defconfig and then using the correct dtb > > > for the platform. Boards like Nitrogen, Sabre or Wandaboard should boot > > > easily with the recent kernels. > > > > > > I am using freescale imx6 quad core saberlite board. Available on the > > freescale site > > http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6Q > > > > Where should be this dtb available according to the board. I am trying to > > boot 3.14 linux kernel. > > The DTS files for all ARM boards are available in the following > directory > > http://lxr.free-electrons.com/source/arch/arm/boot/dts/?v=3.14 > > > http://lxr.free-electrons.com/source/arch/arm/configs/imx_v6_v7_defconfig?v=3.14 > > imx_v6_v7_defconfig is the config file for imx platform. > > -Regards, > Sanchayan. > > > > > > > > Do you have a custom board or one of those easily available development > > > platforms? > > > > > > Board is easily available in the market. > > > > > > > - Regards, > > > Sanchayan.. > > > > > > > > > > > Thanks in advance > > > > Regards > > > > > > > > Chirag Garg > > > > IIT Madras , Rise Lab > > > > > > > > Regards > > Chirag Garg > > IIT Madras , Rise Lab > > > > > > > > _______________________________________________ > > > > Kernelnewbies mailing list > > > > [email protected] > > > > http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies > > > > > > >
_______________________________________________ Kernelnewbies mailing list [email protected] http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
