On Fri, Mar 4, 2016 at 9:09 PM, 张云 <zyun...@163.com> wrote: > First your must know exactly how linux boot (not at source code level). > > Most recent linux distributions boot as > > grub —> kernel —> initramfs’ /init executable > > All the userspace affair is started by initramfs’ /init. Kernel no longer > join the boot process. > > From you description, I think you were blocked by the initramfs concept. > Initramfs is the first root filesystem and reside in memeory. > It’s loaded by grub, and the kernel automatically mount it, execute the > /init. The /init executable can do some extra initialisation > and switch to the real root filesystem on disk. > for detail /Documentaion/filesystems/ramfs-rootfs-initramfs > > Hope that would be useful to your. >
Thanks for the response. I was able to get a minimal boot using the files in the mini.iso image from Ubuntu. I just copied the kernel and the ramdisk image from that iso, and these have given me enough to start learning some things. It is still just dropping me into the prompt for the ramdisk image, so the kernel hasn't yet made the switch over to root filesystem on a drive, but this is at least enough to get me started. One thing I noticed that confused me was the result of the commands pasted below. It looks like the partition table on the disk image might be getting messed up. But, interestingly enough, it still seems to allow me to use the image for booting. In spite of this, fdisk is giving me strange output when I ask it to print out the partition tables after I build a file system on the disk image using mkfs. When I look at the disk image using gparted, on the other hand, it actually looks OK. It looks like I might be using mkfs incorrectly. Can anyone see anything obvious that I am doing wrong? ============== dd if=/dev/zero of=./disk.img bs=1M count=1000 sudo losetup /dev/loop0 ./disk.img sudo fdisk /dev/loop0 (commands in fdisk) > n (new partition) > p (primary partition) > 1 (partition number) > (default start and end for partition) > t (change type of partition) > b (change type of partition to FAT32) > a (set boot flag) > 1 (set boot flag for first partition) > w (write changes) fdisk -lu /dev/loop0 Disk /dev/loop0 : 1048 MB, 1048576000 bytes 123 heads, 59 sectors/track, 282 cylinders, total 2048000 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x7b9351bf Device Boot Start End Blocks Id System /dev/loop 0 p1 * 2048 2047999 1022976 b W95 FAT32 mkfs -t vfat /dev/loop0 fdisk -lu /dev/loop0 Disk /dev/loop0: 1048 MB, 1048576000 bytes 255 heads, 63 sectors/track, 127 cylinders, total 2048000 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System ============== Thanks, Patrick
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies