On Tue, Mar 08, 2016 at 08:15:26PM +0100, Silvan Jegen wrote:
> Heyho
>
> I bought a Mad Catz Fightstick TE2 for Xbox One because I wanted to play
> some fighting games on Linux. I chose this stick because it has gotten good
> reviews and I assumed that the Kernel driver should work because there are
> already drivers for Xbox One controllers in drivers/input/joystick/xpad.c.
>
> It turns out that the driver does not work and dmesg just shows
>
> [12293.077720] usb 1-1.2.1: new full-speed USB device number 9 using ehci-pci
>
> when plugging it in. Simply adding the line
>
> { 0x0738, 0x4a01, "Mad Catz FightStick TE 2", 0, XTYPE_XBOXONE },
>
> (where the two Hex values are VENDOR_ID and PRODUCT_ID) to xpad_device[]
> in xpad.c does not help either (which I naively hoped it would).
Try asking this on the linux-in...@vger.kernel.org mailing list, the
developers there should be able to help you out better than this one
can.
good luck,
greg k-h
_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@kernelnewbies.org
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
