Hi,
OF stands for open firmware, OF uses a format to represent platform
information, which is called a device tree.
An example of how the driver extracts information from device tree:
#if defined(CONFIG_OF)
static const struct of_device_id dali_of_ids[] =
{
{ .compatible = "arm,dali_gpio", },
{},
};
MODULE_DEVICE_TABLE(of, dali_of_ids);
#endif
static struct platform_driver dali_driver = {
.driver = {
.name = "dali_gpio",
.of_match_table = of_match_ptr(dali_of_ids),
},
.probe = Dali_probe,
.remove = Dali_remove,
};
The driver is going to fetch information from the device tree later on
(in probe) using the compatible property mentioned. So if the tree has
the same compatible string then subsequent information can be obtained
from that device tree node.
Thanks
On Thu, Jul 21, 2016 at 9:42 AM, Gadre Nayan <[email protected]> wrote:
> Hi,
>
> OF stands for open firmware, OF uses a format to represent platform
> information, which is called a device tree.
>
> An example of how the driver extracts information from device tree:
>
> #if defined(CONFIG_OF)
> static const struct of_device_id dali_of_ids[] =
> {
> { .compatible = "arm,dali_gpio", },
> {},
> };
>
> MODULE_DEVICE_TABLE(of, dali_of_ids);
> #endif
>
> static struct platform_driver dali_driver = {
> .driver = {
> .name = "dali_gpio",
> .of_match_table = of_match_ptr(dali_of_ids),
> },
> .probe = Dali_probe,
> .remove = Dali_remove,
> };
>
> The driver is going to fetch information from the device tree later on
> (in probe) using the compatible property mentioned. So if the tree has
> the same compatible string then subsequent information can be obtained
> from that device tree node.
>
> Thanks
> Nayan Gadre
>
> On Wed, Jul 20, 2016 at 8:30 PM, Anish Kumar
> <[email protected]> wrote:
>>
>>
>> On Jul 20, 2016, at 4:15 AM, Raul Piper <[email protected]> wrote:
>>
>> Hi,
>> I wanted to know the part number
>>
>>
>> What is part number?
>>
>> for the leds-gpio.c in the driver/leds folder and the device tree bindings
>> for this driver .Can some one point out to me where in Linux kernel it is?
>>
>> Also why below line has been used.Is it mandatory?
>> ...
>> .of_match_table = of_gpio_leds_match,
>>
>>
>> This is needed when you are using device tree for getting the board settings
>> but you can also do the same without this as well. Read up on device tree in
>> kernel Documentation folder.
>>
>> },
>>
>> thanks in advance ,
>> Rp
>>
>> _______________________________________________
>> Kernelnewbies mailing list
>> [email protected]
>> https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
>>
>>
>> _______________________________________________
>> Kernelnewbies mailing list
>> [email protected]
>> https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
>>
_______________________________________________
Kernelnewbies mailing list
[email protected]
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
