On 5/19/08, Michael Blizek <[EMAIL PROTECTED]> wrote: > On 07:55 Sun 18 May , Robert P. J. Day wrote: > > > > possibly slightly off-topic, but i've been handed (not at hand at > > the moment, though) an embedded system running 2.4.26, which has a > > bunch of flash-based partitions corresponding to the device files > > /dev/scsi/host-?/bus0/target0/lun0/part-?. > > > > what i want is a quick way to determine the size in bytes of those > > partitions. will there be entries for them in /proc/partitions? is > > there a better way? they won't necessarily be mounted; in fact, they > > probably won't be. thoughts? thanks. > > cat /sys/block/hda/hda1/size > -Michi > --
it display the data in which unit? On my system, the output is as follows:- [EMAIL PROTECTED]:~> df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 10G 4.7G 5.3G 47% / udev 466M 208K 466M 1% /dev /dev/sda5 43G 14G 27G 35% /home /dev/sda7 20G 7.1G 12G 39% /home1 [EMAIL PROTECTED]:~> cat /sys/block/sda/sda1/size 20900502 [EMAIL PROTECTED]:~> cat /sys/block/sda/sda5/size 91570437 These outputs are not matching with the first one. Am I missing anything?? > programing a layer 3+4 network protocol for mesh networks > see http://michaelblizek.twilightparadox.com > > > -- > To unsubscribe from this list: send an email with > "unsubscribe kernelnewbies" to [EMAIL PROTECTED] > Please read the FAQ at http://kernelnewbies.org/FAQ > > -- To unsubscribe from this list: send an email with "unsubscribe kernelnewbies" to [EMAIL PROTECTED] Please read the FAQ at http://kernelnewbies.org/FAQ
