Octavian Purdila wrote:
> On Tuesday 08 July 2008, Hinko Kocevar wrote:
>
> Hi Hinko,
>
>>
>> -MODULE_PARM(ussp_debug, "i");
>> -MODULE_PARM(ussp_set_lowlatency, "i");
>> +//MODULE_PARM(ussp_debug, "i");
>> +//MODULE_PARM(ussp_set_lowlatency, "i");
>> +/* what is wrong with this lines ??? */
>> +//module_parm(ussp_debug, int, 0);
>> +//module_parm(ussp_set_lowlatency, int, 0);
>>
>
> Should be module_param(...).
>
:)
>
>> break;
>> case TIOCSSOFTCAR:
>> - if ((rc = verify_area(VERIFY_READ, (void *) arg,
>> + /* verify_area() function will go away soon - use
>> access_ok() instead */ +/* if ((rc = verify_area(VERIFY_READ,
>> (void *) arg,
>> sizeof(int))) == 0) {
>> get_user(ival, (unsigned int *) arg);
>> tty->termios->c_cflag =
>> (tty->termios->c_cflag & ~CLOCAL) |
>> (ival ? CLOCAL : 0);
>> }
>> +*/
>> break;
>
> You can skip the verify_area / access_ok, just use get_user. BTW, why is
> this
> section commented.
I'll dump verify_area() - it's commented to make it compile..
>
>
>> ussp_dprintk (DEBUG_IOCTL, "USSP_READ %d\n", (int)op.len);
>> - rc = copy_from_user (port->tty->flip.char_buf_ptr, buf +
>> sizeof(struct ussp_operation), op.len); -
>> memset(port->tty->flip.flag_buf_ptr, TTY_NORMAL, op.len); -
>> port->tty->flip.count += op.len;
>> - port->tty->flip.char_buf_ptr += op.len;
>> - port->tty->flip.flag_buf_ptr += op.len;
>> + buff = kmalloc((int)op.len, GFP_KERNEL);
>> +// rc = copy_from_user (port->tty->flip.char_buf_ptr, buf +
>> sizeof(struct ussp_operation), op.len); +//
>> memset(port->tty->flip.flag_buf_ptr, TTY_NORMAL, op.len); +//
>> port->tty->flip.count += op.len;
>> +// port->tty->flip.char_buf_ptr += op.len;
>> +// port->tty->flip.flag_buf_ptr += op.len;
>> + rc = tty_buffer_request_room(port->tty, (int)op.len);
>> + if (rc > 0)
>> + tty_insert_flip_string(port->tty, buff,
>> (int)op.len); + tty_insert_flip_char(port->tty, 0,
>> TTY_NORMAL);
>> tty_flip_buffer_push (port->tty);
>> port->stats.rxcount += op.len;
>> + kfree(buff);
>> break;
>
> Check the buff usage, it does not seem right to me. But since I don't have
> any
> context about USSP_READ I can't tell more.
I just noticed missing copy_from_user() above. USSP_READ/USSP_WRITE definitions
go like this:
Write: (kernel -> Userspace)
op = USSP_WRITE;
len = length of data.
data[] holds the data.
Read: (Userspace -> kernel)
op = USSP_READ;
len = length of data.
data[] holds the data.
Since I can't access internal flip buffer port->tty->flip.char_buf_ptr I used
temp buffer (buff) for userspace data before handing it over to the tty layer
via tty_insert_flip_string().
>
>
>> +/*
>> +
>> ussp_dprintk (DEBUG_OPEN, "current->signal->leader: %d
>> current->signal->tty: %d tty->session: %d\n", (int)current->signal->leader,
>> (int)current->signal->tty, (int)tty->session); if (current->signal->leader
>> && !current->signal->tty && tty->session == 0){ ussp_dprintk (DEBUG_OPEN,
>> "setting!\n");
>> @@ -680,7 +704,7 @@
>> tty->session = current->signal->session;
>> tty->pgrp = process_group(current);
>> }
>> -
>> +*/
>
> I think you can discard this part.
Will do.
Thanks for your comments.
Hinko
--
ČETRTA POT, d.o.o., Kranj
Planina 3
4000 Kranj
Slovenia, Europe
Tel. +386 (0) 4 280 66 03
E-mail: [EMAIL PROTECTED]
Http: www.cetrtapot.si
--
To unsubscribe from this list: send an email with
"unsubscribe kernelnewbies" to [EMAIL PROTECTED]
Please read the FAQ at http://kernelnewbies.org/FAQ
