On Wed, Sep 24, 2008 at 09:44:28PM +0800, fisherman wrote:
> >>>
>
> >
> > Delete the device ids from the driver.
> >
> >
> I test in my box, BUT Failed Again:
>
> e1000e_pci_tbl:
> { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
> { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
> //{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan },
> { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan },
> { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan },
>
> [EMAIL PROTECTED]:/sys/bus/pci/drivers/e1000e# lspci | grep Ethernet
> 00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network
> Connection (rev 02)
> [EMAIL PROTECTED]:/sys/bus/pci/drivers/e1000e# echo -n "0000:00:19.0" >
> /sys/bus/pci/drivers/e1000e/bind
> bash: echo: write error: No such device
The driver needs to have the device id in the table for bind to work,
you can dynamically write it if it isn't there by using the new_id file.
But this is getting just silly. What specifically are you wanting to do
with a working driver? Why are you not wanting to bind this device to
the driver? What are you wanting to break here? :)
thanks,
greg k-h
--
To unsubscribe from this list: send an email with
"unsubscribe kernelnewbies" to [EMAIL PROTECTED]
Please read the FAQ at http://kernelnewbies.org/FAQ
