Bhavesh Kamani wrote:
Hi Team,
I want to test ethernet driver for NIC, I have only one PC with
two different NICs(for both drivers are different), So I disabled
loopback and connected both the NICs using cross cable. Output of
"ifconfig" is displaying both the interfaces and ip address is also
set for both the interfaces.
I executed following to set ip address :
#ifconfig eth0 192.168.0.1 <http://192.168.0.1/> netmask 255.255.255.0
<http://255.255.255.0/>
#ifconfig eth1 192.168.0.5 <http://192.168.0.5/> netmask 255.255.255.0
<http://255.255.255.0/>
#ifconfig lo down
After that I tried to execute following commands,
#route add -net 192.168.0.5 <http://192.168.0.5/> netmask
255.255.255.0 <http://255.255.255.0/> gw 192.168.0.5
<http://192.168.0.5/> dev eth0
#route add -net 192.168.0.1 <http://192.168.0.1/> netmask
255.255.255.0 <http://255.255.255.0/> gw 192.168.0.1
<http://192.168.0.1/> dev eth1
but those comands are giving error like :
" route: netmask doesn't match route address"
I don't understand why u need route here?
I also put "1" in ip_forward file.
I am not able to ping anyone of those interfaces using ping command.
I suppose you need to make both the eternets active.
Can anyone give some inputs on this?
Thanks,
Bhavesh.
--
-_-
.
Regards,
R.S.Shree Ram
GDA Technologies Ltd.
