From edef040c17106bb02431b9399e9b214da8d7a5fd Mon Sep 17 00:00:00 2001 From: Martin Olsson <[email protected]> Date: Sat, 4 Apr 2009 12:29:59 +0200 Subject: [PATCH] Correctly spell the word "parameter" in various source comments.
Signed-off-by: Martin Olsson <[email protected]> --- drivers/atm/lanai.c | 2 +- drivers/input/joystick/xpad.c | 2 +- drivers/net/b44.c | 2 +- drivers/net/smc-mca.c | 2 +- drivers/net/wireless/orinoco/orinoco.h | 2 +- drivers/net/wireless/p54/p54spi.c | 2 +- drivers/scsi/qla1280.c | 2 +- drivers/scsi/qla4xxx/ql4_mbx.c | 2 +- drivers/staging/epl/EplInstDef.h | 2 +- drivers/staging/rt2860/rt28xx.h | 2 +- drivers/staging/rt2870/rt28xx.h | 2 +- drivers/usb/core/message.c | 4 ++-- drivers/usb/serial/io_edgeport.c | 2 +- drivers/usb/serial/ir-usb.c | 2 +- drivers/video/controlfb.c | 2 +- fs/debugfs/inode.c | 6 +++--- 16 files changed, 19 insertions(+), 19 deletions(-) diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c index 8733a2e..df6753e 100644 --- a/drivers/atm/lanai.c +++ b/drivers/atm/lanai.c @@ -66,7 +66,7 @@ #include <linux/delay.h> #include <linux/interrupt.h> -/* -------------------- TUNABLE PARAMATERS: */ +/* -------------------- TUNABLE PARAMETERS: */ /* * Maximum number of VCIs per card. Setting it lower could theoretically diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index b868b8d..32dfada 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -66,7 +66,7 @@ * - borrowed from the XBOX linux kernel * - USB id's for commonly used dance pads are present * - dance pads will map D-PAD to buttons, not axes - * - pass the module paramater 'dpad_to_buttons' to force + * - pass the module parameter 'dpad_to_buttons' to force * the D-PAD to map to buttons if your pad is not detected * * Later changes can be tracked in SCM. diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 5c84541..230c13c 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -2343,7 +2343,7 @@ static int __init b44_init(void) unsigned int dma_desc_align_size = dma_get_cache_alignment(); int err; - /* Setup paramaters for syncing RX/TX DMA descriptors */ + /* Setup parameters for syncing RX/TX DMA descriptors */ dma_desc_align_mask = ~(dma_desc_align_size - 1); dma_desc_sync_size = max_t(unsigned int, dma_desc_align_size, sizeof(struct dma_desc)); diff --git a/drivers/net/smc-mca.c b/drivers/net/smc-mca.c index 8d36d40..568658e 100644 --- a/drivers/net/smc-mca.c +++ b/drivers/net/smc-mca.c @@ -240,7 +240,7 @@ static int __init ultramca_probe(struct device *gen_dev) /* Test the following conditions: * - If an irq parameter is supplied, compare it * with the irq of the adapter we found - * - If a base_addr paramater is given, compare it + * - If a base_addr parameter is given, compare it * with the base_addr of the adapter we found * - Check that the irq and the base_addr of the * adapter we found is not already in use by diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h index 8e5a72c..5df7837 100644 --- a/drivers/net/wireless/orinoco/orinoco.h +++ b/drivers/net/wireless/orinoco/orinoco.h @@ -115,7 +115,7 @@ struct orinoco_private { unsigned int broken_disableport:1; unsigned int broken_monitor:1; - /* Configuration paramaters */ + /* Configuration parameters */ u32 iw_mode; int prefer_port3; u16 encode_alg, wep_restrict, tx_key; diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c index 2b222aa..b83a7b4 100644 --- a/drivers/net/wireless/p54/p54spi.c +++ b/drivers/net/wireless/p54/p54spi.c @@ -42,7 +42,7 @@ MODULE_ALIAS("stlc45xx"); /* * gpios should be handled in board files and provided via platform data, * but because it's currently impossible for p54spi to have a header file - * in include/linux, let's use module paramaters for now + * in include/linux, let's use module parameters for now */ static int p54spi_gpio_power = 97; diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index df09820..a1fc449 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -4326,7 +4326,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) goto error_release_region; } - /* load the F/W, read paramaters, and init the H/W */ + /* load the F/W, read parameters, and init the H/W */ if (qla1280_initialize_adapter(ha)) { printk(KERN_INFO "qla1x160: Failed to initialize adapter\n"); goto error_free_irq; diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index 051b0f5..cd18028 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -250,7 +250,7 @@ int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha) /*memcpy(ha->alias, init_fw_cb->Alias, min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/ - /* Save Command Line Paramater info */ + /* Save Command Line Parameter info */ ha->port_down_retry_count = le16_to_cpu(init_fw_cb->pri.conn_ka_timeout); ha->discovery_wait = ql4xdiscoverywait; diff --git a/drivers/staging/epl/EplInstDef.h b/drivers/staging/epl/EplInstDef.h index 89efbf2..1f2fd2e 100644 --- a/drivers/staging/epl/EplInstDef.h +++ b/drivers/staging/epl/EplInstDef.h @@ -163,7 +163,7 @@ typedef BYTE tEplInstanceHdl; //-------------------------------------------------------------------------------------- // macros for declaration within the function header, prototype or local var list - // Declaration of pointers within function paramater list must defined as void MEM* + // Declaration of pointers within function parameter list must defined as void MEM* // pointer. #define EPL_MCO_DECL_INSTANCE_PTR void MEM* pInstance #define EPL_MCO_DECL_INSTANCE_PTR_ void MEM* pInstance, diff --git a/drivers/staging/rt2860/rt28xx.h b/drivers/staging/rt2860/rt28xx.h index ff23043..eefc7db 100644 --- a/drivers/staging/rt2860/rt28xx.h +++ b/drivers/staging/rt2860/rt28xx.h @@ -1063,7 +1063,7 @@ typedef union _LG_FBK_CFG1_STRUC { #endif //======================================================= -//================ Protection Paramater================================ +//================ Protection Parameter================================ //======================================================= #define CCK_PROT_CFG 0x1364 //CCK Protection #define ASIC_SHORTNAV 1 diff --git a/drivers/staging/rt2870/rt28xx.h b/drivers/staging/rt2870/rt28xx.h index 3927d22..9a9b708 100644 --- a/drivers/staging/rt2870/rt28xx.h +++ b/drivers/staging/rt2870/rt28xx.h @@ -1063,7 +1063,7 @@ typedef union _LG_FBK_CFG1_STRUC { #endif //======================================================= -//================ Protection Paramater================================ +//================ Protection Parameter================================ //======================================================= #define CCK_PROT_CFG 0x1364 //CCK Protection #define ASIC_SHORTNAV 1 diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 30a0690..435e43e 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -172,7 +172,7 @@ EXPORT_SYMBOL_GPL(usb_control_msg); * waits for the message to complete, or timeout. * * If successful, it returns 0, otherwise a negative error number. The number - * of actual bytes transferred will be stored in the actual_length paramater. + * of actual bytes transferred will be stored in the actual_length parameter. * * Don't use this function from within an interrupt context, like a bottom half * handler. If you need an asynchronous message, or need to send a message @@ -205,7 +205,7 @@ EXPORT_SYMBOL_GPL(usb_interrupt_msg); * and waits for the message to complete, or timeout. * * If successful, it returns 0, otherwise a negative error number. The number - * of actual bytes transferred will be stored in the actual_length paramater. + * of actual bytes transferred will be stored in the actual_length parameter. * * Don't use this function from within an interrupt context, like a bottom half * handler. If you need an asynchronous message, or need to send a message diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index e85c8c0..a242ef5 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -151,7 +151,7 @@ struct edgeport_serial { __u8 rxHeader3; /* receive header byte 3 */ __u8 rxPort; /* the port that we are currently receiving data for */ __u8 rxStatusCode; /* the receive status code */ - __u8 rxStatusParam; /* the receive status paramater */ + __u8 rxStatusParam; /* the receive status parameter */ __s16 rxBytesRemaining; /* the number of port bytes left to read */ struct usb_serial *serial; /* loop back to the owner of this object */ }; diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 4e2cda9..bf4e2f3 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -47,7 +47,7 @@ * * 2001_Nov_01 greg kh * Added support for more IrDA USB devices. - * Added support for zero packet. Added buffer override paramater, so + * Added support for zero packet. Added buffer override parameter, so * users can transfer larger packets at once if they wish. Both patches * came from Dag Brattli <[email protected]>. * diff --git a/drivers/video/controlfb.c b/drivers/video/controlfb.c index 49fcbe8..b8929d3 100644 --- a/drivers/video/controlfb.c +++ b/drivers/video/controlfb.c @@ -792,7 +792,7 @@ static int read_control_sense(struct fb_info_control *p) #define CONTROL_PIXCLOCK_MIN 5000 /* ~ 200 MHz dot clock */ /* - * calculate the clock paramaters to be sent to CUDA according to given + * calculate the clock parameters to be sent to CUDA according to given * pixclock in pico second. */ static int calc_clock_params(unsigned long clk, unsigned char *param) diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index 81ae9ea..9a6f88b 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -185,7 +185,7 @@ static int debugfs_create_by_name(const char *name, mode_t mode, * @name: a pointer to a string containing the name of the file to create. * @mode: the permission that the file should have * @parent: a pointer to the parent dentry for this file. This should be a - * directory dentry if set. If this paramater is NULL, then the + * directory dentry if set. If this parameter is NULL, then the * file will be created in the root of the debugfs filesystem. * @data: a pointer to something that the caller will want to get to later * on. The inode.i_private pointer will point to this value on @@ -243,7 +243,7 @@ EXPORT_SYMBOL_GPL(debugfs_create_file); * @name: a pointer to a string containing the name of the directory to * create. * @parent: a pointer to the parent dentry for this file. This should be a - * directory dentry if set. If this paramater is NULL, then the + * directory dentry if set. If this parameter is NULL, then the * directory will be created in the root of the debugfs filesystem. * * This function creates a directory in debugfs with the given name. @@ -269,7 +269,7 @@ EXPORT_SYMBOL_GPL(debugfs_create_dir); * @name: a pointer to a string containing the name of the symbolic link to * create. * @parent: a pointer to the parent dentry for this symbolic link. This - * should be a directory dentry if set. If this paramater is NULL, + * should be a directory dentry if set. If this parameter is NULL, * then the symbolic link will be created in the root of the debugfs * filesystem. * @target: a pointer to a string containing the path to the target of the -- 1.6.0.4
0001-Correctly-spell-the-word-parameter-in-various-sour.patch
Description: application/mbox
