Hi,
For each irq descriptor, there is a state bit IRQ_DISABLED
indicating whether corresponding IRQ is masked. But, when checking the
source code, I find that the function mask_and_ack_8259A(), which is
responsible for acknowledge the PIC and mask corresponding bit in it,
doesn't affect IRQ_DISABLED bit at all. Its code is as follows:
handle_real_irq:
if (irq & 8) {
inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */
outb(cached_slave_mask, PIC_SLAVE_IMR);
outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */
outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific
EOI' to master-IRQ2 */
} else {
inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */
outb(cached_master_mask, PIC_MASTER_IMR);
outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */
}
While for IO APIC, there is no change of IRQ_DISABLED bit yet.
move_irq(irq);
if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED))
== (IRQ_PENDING | IRQ_DISABLED))
mask_IO_APIC_irq(irq);
ack_APIC_irq();
So, is there unconsistency between kernel data and the state of PIC?
--
To unsubscribe from this list: send an email with
"unsubscribe kernelnewbies" to [email protected]
Please read the FAQ at http://kernelnewbies.org/FAQ
