Hi Geoff
I tested your patches. The macihne is using spin-table cpu enable method
so I tried maxcpus=1 as you suggested.
There's below issues for me, thoughts?
1. For acpi booting there's no /proc/device-tree so kexec can not find dtb
to use.
2. adding "acpi=off" to 1st kernel boot cmdline, kexec load fails with error
like below:
machine_apply_elf_rel: ERROR Unknown type: 261
I did below hack then kexec load works fine, but `kexec -e` still does not work
there's nothing more than "Disableing non-boot CPUS ...\n Bye!":
diff --git a/kexec/arch/arm64/kexec-arm64.c b/kexec/arch/arm64/kexec-arm64.c
index 9db1c07..2df24f0 100644
--- a/kexec/arch/arm64/kexec-arm64.c
+++ b/kexec/arch/arm64/kexec-arm64.c
@@ -790,6 +790,10 @@ void machine_apply_elf_rel(struct mem_ehdr *ehdr, unsigned
long r_type,
# define R_AARCH64_ABS64 257
#endif
+#if !defined(R_AARCH64_PREL32)
+#define R_AARCH64_PREL32 261
+#endif
+
#if !defined(R_AARCH64_LD_PREL_LO19)
# define R_AARCH64_LD_PREL_LO19 273
#endif
@@ -806,6 +810,7 @@ void machine_apply_elf_rel(struct mem_ehdr *ehdr, unsigned
long r_type,
# define R_AARCH64_CALL26 283
#endif
+ uint64_t *location1 = (uint64_t *)ptr;
uint32_t *location = (uint32_t *)ptr;
uint32_t data = *location;
const char *type = NULL;
@@ -813,7 +818,11 @@ void machine_apply_elf_rel(struct mem_ehdr *ehdr, unsigned
long r_type,
switch(r_type) {
case R_AARCH64_ABS64:
type = "ABS64";
- *location += value;
+ *location1 += value;
+ break;
+ case R_AARCH64_PREL32:
+ type = "PREL32";
+ *location += value - address;
break;
case R_AARCH64_LD_PREL_LO19:
type = "LD_PREL_LO19";
@@ -839,7 +848,7 @@ void machine_apply_elf_rel(struct mem_ehdr *ehdr, unsigned
long r_type,
break;
}
- dbgprintf("%s: %s %x->%x\n", __func__, type, data, *location);
+ dbgprintf("%s: %s %x->%lx\n", __func__, type, data, (r_type ==
R_AARCH64_ABS64)? *location1: *location);
}
void arch_reuse_initrd(void)
Thanks
Dave
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
