On Fri 2020-05-01 11:46:09, John Ogness wrote:
> Introduce a multi-reader multi-writer lockless ringbuffer for storing
> the kernel log messages. Readers and writers may use their API from
> any context (including scheduler and NMI). This ringbuffer will make
> it possible to decouple printk() callers from any context, locking,
> or console constraints. It also makes it possible for readers to have
> full access to the ringbuffer contents at any time and context (for
> example from any panic situation).
>
> --- /dev/null
> +++ b/kernel/printk/printk_ringbuffer.c
> +/*
> + * Given a data ring (text or dict), put the associated descriptor of each
> + * data block from @lpos_begin until @lpos_end into the reusable state.
> + *
> + * If there is any problem making the associated descriptor reusable, either
> + * the descriptor has not yet been committed or another writer task has
> + * already pushed the tail lpos past the problematic data block. Regardless,
> + * on error the caller can re-load the tail lpos to determine the situation.
> + */
> +static bool data_make_reusable(struct printk_ringbuffer *rb,
> + struct prb_data_ring *data_ring,
> + unsigned long lpos_begin,
> + unsigned long lpos_end,
> + unsigned long *lpos_out)
> +{
> + struct prb_desc_ring *desc_ring = &rb->desc_ring;
> + struct prb_data_blk_lpos *blk_lpos;
> + struct prb_data_block *blk;
> + unsigned long tail_lpos;
> + enum desc_state d_state;
> + struct prb_desc desc;
> + unsigned long id;
> +
> + /*
> + * Using the provided @data_ring, point @blk_lpos to the correct
> + * blk_lpos within the local copy of the descriptor.
> + */
> + if (data_ring == &rb->text_data_ring)
> + blk_lpos = &desc.text_blk_lpos;
> + else
> + blk_lpos = &desc.dict_blk_lpos;
> +
> + /* Loop until @lpos_begin has advanced to or beyond @lpos_end. */
> + while ((lpos_end - lpos_begin) - 1 < DATA_SIZE(data_ring)) {
> + blk = to_block(data_ring, lpos_begin);
> + id = READ_ONCE(blk->id); /* LMM(data_make_reusable:A) */
This would deserve some comment:
1. Compiler could not optimize out the read because there is a data
dependency on lpos_begin.
2. Compiler could not postpone the read because it is followed by
smp_rmb().
So, is READ_ONCE() realy needed?
Well, blk->id clearly can be modified in parallel so we need to be
careful. There is smp_rmb() right below. Do we needed smp_rmb() also
before?
What about the following scenario?:
CPU0 CPU1
data_alloc()
data_push_tail()
blk = to_block(data_ring,
begin_lpos)
WRITE_ONCE(blk->id, id); /*
LMM(data_alloc:B) */
desc_push_tail()
data_push_tail()
tail_lpos = data_ring->tail_lpos;
// see data_ring->tail_lpos already updated by CPU1
data_make_reusable()
// lpos_begin = tail_lpos via parameter
blk = to_block(data_ring, lpos_begin);
id = blk->id
Now: CPU0 might see outdated blk->id before CPU1 wrote new value
because there is no read barrier betwen reading tail_lpos
and blk->id here.
The outdated id would cause desc_miss. CPU0 would return back
to data_push_tail(). It will try to re-read data_ring->tail_lpos.
But it will be the same as before because it already read the
updated value.
As a result, data_alloc() would fail.
IMHO, we need smp_rmb() between data_ring->tail_lpos read and
the related blk->id read. It should be either in data_push_tail()
or in data_make_reusable().
Best Regards,
Petr
PS: I am still in the middle of the review. I think that it is better
to discuss each race separately.
> + /*
> + * Guarantee the block ID is loaded before checking the tail
> + * lpos. The loaded block ID can only be considered valid if
> + * the tail lpos has not overtaken @lpos_begin. This pairs
> + * with data_alloc:A.
> + *
> + * Memory barrier involvement:
> + *
> + * If data_make_reusable:A reads from data_alloc:B, then
> + * data_make_reusable:C reads from data_push_tail:D.
> + *
> + * Relies on:
> + *
> + * MB from data_push_tail:D to data_alloc:B
> + * matching
> + * RMB from data_make_reusable:A to data_make_reusable:C
> + *
> + * Note: data_push_tail:D and data_alloc:B can be different
> + * CPUs. However, the data_alloc:B CPU (which performs
> + * the full memory barrier) must have previously seen
> + * data_push_tail:D.
> + */
> + smp_rmb(); /* LMM(data_make_reusable:B) */
> +
> + tail_lpos = atomic_long_read(&data_ring->tail_lpos
> + ); /* LMM(data_make_reusable:C) */
> +
> + /*
> + * If @lpos_begin has fallen behind the tail lpos, the read
> + * block ID cannot be trusted. Fast forward @lpos_begin to the
> + * tail lpos and try again.
> + */
> + if (lpos_begin - tail_lpos >= DATA_SIZE(data_ring)) {
> + lpos_begin = tail_lpos;
> + continue;
> + }
> +
> + d_state = desc_read(desc_ring, id,
> + &desc); /* LMM(data_make_reusable:D) */
> +
> + switch (d_state) {
> + case desc_miss:
> + return false;
> + case desc_reserved:
> + return false;
> + case desc_committed:
> + /*
> + * This data block is invalid if the descriptor
> + * does not point back to it.
> + */
> + if (blk_lpos->begin != lpos_begin)
> + return false;
> + desc_make_reusable(desc_ring, id);
> + break;
> + case desc_reusable:
> + /*
> + * This data block is invalid if the descriptor
> + * does not point back to it.
> + */
> + if (blk_lpos->begin != lpos_begin)
> + return false;
> + break;
> + }
> +
> + /* Advance @lpos_begin to the next data block. */
> + lpos_begin = blk_lpos->next;
> + }
> +
> + *lpos_out = lpos_begin;
> + return true;
> +}
> +
> +/*
> + * Advance the data ring tail to at least @lpos. This function puts
> + * descriptors into the reusable state if the tail is pushed beyond
> + * their associated data block.
> + */
> +static bool data_push_tail(struct printk_ringbuffer *rb,
> + struct prb_data_ring *data_ring,
> + unsigned long lpos)
> +{
> + unsigned long tail_lpos;
> + unsigned long next_lpos;
> +
> + /* If @lpos is not valid, there is nothing to do. */
> + if (lpos == INVALID_LPOS)
> + return true;
> +
> + tail_lpos = atomic_long_read(&data_ring->tail_lpos);
> +
> + do {
> + /* Done, if the tail lpos is already at or beyond @lpos. */
> + if ((lpos - tail_lpos) - 1 >= DATA_SIZE(data_ring))
> + break;
> +
> + /*
> + * Make all descriptors reusable that are associated with
> + * data blocks before @lpos.
> + */
> + if (!data_make_reusable(rb, data_ring, tail_lpos, lpos,
> + &next_lpos)) {
> + /*
> + * Guarantee the descriptor state loaded in
> + * data_make_reusable() is performed before reloading
> + * the tail lpos. The failed data_make_reusable() may
> + * be due to a newly recycled descriptor causing
> + * the tail lpos to have been previously pushed. This
> + * pairs with desc_reserve:D.
> + *
> + * Memory barrier involvement:
> + *
> + * If data_make_reusable:D reads from desc_reserve:G,
> + * then data_push_tail:B reads from data_push_tail:D.
> + *
> + * Relies on:
> + *
> + * MB from data_push_tail:D to desc_reserve:G
> + * matching
> + * RMB from data_make_reusable:D to data_push_tail:B
> + *
> + * Note: data_push_tail:D and desc_reserve:G can be
> + * different CPUs. However, the desc_reserve:G
> + * CPU (which performs the full memory barrier)
> + * must have previously seen data_push_tail:D.
> + */
> + smp_rmb(); /* LMM(data_push_tail:A) */
> +
> + next_lpos = atomic_long_read(&data_ring->tail_lpos
> + ); /* LMM(data_push_tail:B) */
> + if (next_lpos == tail_lpos)
> + return false;
> +
> + /* Another task pushed the tail. Try again. */
> + tail_lpos = next_lpos;
> + continue;
> + }
> +
> + /*
> + * Guarantee any descriptor states that have transitioned to
> + * reusable are stored before pushing the tail lpos. This
> + * allows readers to identify if data has expired while
> + * reading the descriptor. This pairs with desc_read:D.
> + */
> + smp_mb(); /* LMM(data_push_tail:C) */
> +
> + } while (!atomic_long_try_cmpxchg_relaxed(&data_ring->tail_lpos,
> + &tail_lpos, next_lpos)); /* LMM(data_push_tail:D) */
> +
> + return true;
> +}
> +
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
