On 09/05/2025 08:46, Changyuan Lyu wrote:
> From: Alexander Graf <[email protected]>
> 
> KHO kernels are special and use only scratch memory for memblock
> allocations, but memory below 1M is ignored by kernel after early boot
> and cannot be naturally marked as scratch.
> 
> To allow allocation of the real-mode trampoline and a few (if any) other
> very early allocations from below 1M forcibly mark the memory below 1M
> as scratch.
> 
> After real mode trampoline is allocated, clear that scratch marking.
> 
> Signed-off-by: Alexander Graf <[email protected]>
> Co-developed-by: Mike Rapoport (Microsoft) <[email protected]>
> Signed-off-by: Mike Rapoport (Microsoft) <[email protected]>
> Co-developed-by: Changyuan Lyu <[email protected]>
> Signed-off-by: Changyuan Lyu <[email protected]>
> Acked-by: Dave Hansen <[email protected]>
> ---
>  arch/x86/kernel/e820.c   | 18 ++++++++++++++++++
>  arch/x86/realmode/init.c |  2 ++
>  2 files changed, 20 insertions(+)
> 
> diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
> index 9920122018a0b..c3acbd26408ba 100644
> --- a/arch/x86/kernel/e820.c
> +++ b/arch/x86/kernel/e820.c
> @@ -1299,6 +1299,24 @@ void __init e820__memblock_setup(void)
>               memblock_add(entry->addr, entry->size);
>       }
>  
> +     /*
> +      * At this point memblock is only allowed to allocate from memory
> +      * below 1M (aka ISA_END_ADDRESS) up until direct map is completely set
> +      * up in init_mem_mapping().
> +      *
> +      * KHO kernels are special and use only scratch memory for memblock
> +      * allocations, but memory below 1M is ignored by kernel after early
> +      * boot and cannot be naturally marked as scratch.
> +      *
> +      * To allow allocation of the real-mode trampoline and a few (if any)
> +      * other very early allocations from below 1M forcibly mark the memory
> +      * below 1M as scratch.
> +      *
> +      * After real mode trampoline is allocated, we clear that scratch
> +      * marking.
> +      */
> +     memblock_mark_kho_scratch(0, SZ_1M);
> +
>       /*
>        * 32-bit systems are limited to 4BG of memory even with HIGHMEM and
>        * to even less without it.
> diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c
> index f9bc444a3064d..9b9f4534086d2 100644
> --- a/arch/x86/realmode/init.c
> +++ b/arch/x86/realmode/init.c
> @@ -65,6 +65,8 @@ void __init reserve_real_mode(void)
>        * setup_arch().
>        */
>       memblock_reserve(0, SZ_1M);
> +
> +     memblock_clear_kho_scratch(0, SZ_1M);
>  }
>  
>  static void __init sme_sev_setup_real_mode(struct trampoline_header *th)

Hello!

I am working with Breno who reported that we are seeing the below warning at 
boot
when rolling out 6.16 in Meta fleet. It is difficult to reproduce on a single 
host
manually but we are seeing this several times a day inside the fleet.

 20:16:33  ------------[ cut here ]------------
 20:16:33  WARNING: CPU: 0 PID: 0 at mm/memblock.c:668 
memblock_add_range+0x316/0x330
 20:16:33  Modules linked in:
 20:16:33  CPU: 0 UID: 0 PID: 0 Comm: swapper Tainted: G S                  
6.16.1-0_fbk0_0_gc0739ee5037a #1 NONE 
 20:16:33  Tainted: [S]=CPU_OUT_OF_SPEC
 20:16:33  RIP: 0010:memblock_add_range+0x316/0x330
 20:16:33  Code: ff ff ff 89 5c 24 08 41 ff c5 44 89 6c 24 10 48 63 74 24 08 48 
63 54 24 10 e8 26 0c 00 00 e9 41 ff ff ff 0f 0b e9 af fd ff ff <0f> 0b e9 b7 fd 
ff ff 0f 0b 0f 0b cc cc cc cc cc cc cc cc cc cc cc
 20:16:33  RSP: 0000:ffffffff83403dd8 EFLAGS: 00010083 ORIG_RAX: 
0000000000000000
 20:16:33  RAX: ffffffff8476ff90 RBX: 0000000000001c00 RCX: 0000000000000002
 20:16:33  RDX: 00000000ffffffff RSI: 0000000000000000 RDI: ffffffff83bad4d8
 20:16:33  RBP: 000000000009f000 R08: 0000000000000020 R09: 8000000000097101
 20:16:33  R10: ffffffffff2004b0 R11: 203a6d6f646e6172 R12: 000000000009ec00
 20:16:33  R13: 0000000000000002 R14: 0000000000100000 R15: 000000000009d000
 20:16:33  FS:  0000000000000000(0000) GS:0000000000000000(0000) 
knlGS:0000000000000000
 20:16:33  CR2: ffff888065413ff8 CR3: 00000000663b7000 CR4: 00000000000000b0
 20:16:33  Call Trace:
 20:16:33   <TASK>
 20:16:33   ? __memblock_reserve+0x75/0x80
 20:16:33   ? setup_arch+0x30f/0xb10
 20:16:33   ? start_kernel+0x58/0x960
 20:16:33   ? x86_64_start_reservations+0x20/0x20
 20:16:33   ? x86_64_start_kernel+0x13d/0x140
 20:16:33   ? common_startup_64+0x13e/0x140
 20:16:33   </TASK>
 20:16:33  ---[ end trace 0000000000000000 ]--- 


Rolling out with memblock=debug is not really an option in a large scale fleet 
due to the
time added to boot. But I did try on one of the hosts (without reproducing the 
issue) and I see:

[    0.000616]  memory.cnt  = 0x6
[    0.000617]  memory[0x0]     [0x0000000000001000-0x000000000009bfff], 
0x000000000009b000 bytes flags: 0x40
[    0.000620]  memory[0x1]     [0x000000000009f000-0x000000000009ffff], 
0x0000000000001000 bytes flags: 0x40
[    0.000621]  memory[0x2]     [0x0000000000100000-0x000000005ed09fff], 
0x000000005ec0a000 bytes flags: 0x0
...

The 0x40 (MEMBLOCK_KHO_SCRATCH) is coming from memblock_mark_kho_scratch in 
e820__memblock_setup. I believe this
should be under ifdef like the diff at the end? (Happy to send this as a patch 
for review if it makes sense).
We have KEXEC_HANDOVER disabled in our defconfig, therefore 
MEMBLOCK_KHO_SCRATCH shouldnt be selected and
we shouldnt have any MEMBLOCK_KHO_SCRATCH type regions in our memblock 
reservations.

The other thing I did was insert a while(1) just before the warning and 
inspected the registers in qemu.
R14 held the base register, and R15 held the size at that point.
In the warning R14 is 0x100000 meaning that someone is reserving a region with 
a different flag to MEMBLOCK_NONE
at the boundary of MEMBLOCK_KHO_SCRATCH.

diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index c3acbd26408ba..26e4062a0bd09 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1299,6 +1299,7 @@ void __init e820__memblock_setup(void)
                memblock_add(entry->addr, entry->size);
        }
 
+#ifdef CONFIG_MEMBLOCK_KHO_SCRATCH
        /*
         * At this point memblock is only allowed to allocate from memory
         * below 1M (aka ISA_END_ADDRESS) up until direct map is completely set
@@ -1316,7 +1317,7 @@ void __init e820__memblock_setup(void)
         * marking.
         */
        memblock_mark_kho_scratch(0, SZ_1M);
-
+#endif
        /*
         * 32-bit systems are limited to 4BG of memory even with HIGHMEM and
         * to even less without it.
diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c
index 88be32026768c..1cd80293a3e23 100644
--- a/arch/x86/realmode/init.c
+++ b/arch/x86/realmode/init.c
@@ -66,8 +66,9 @@ void __init reserve_real_mode(void)
         * setup_arch().
         */
        memblock_reserve(0, SZ_1M);
-
+#ifdef CONFIG_MEMBLOCK_KHO_SCRATCH
        memblock_clear_kho_scratch(0, SZ_1M);
+#endif
 }
 
 static void __init sme_sev_setup_real_mode(struct trampoline_header *th)

Reply via email to