Which ethernet card are you using? If its 1000 MB is NAPI disabled? -Miline
Dipak Dudhabhate wrote: > HI, > > I trying to do setup for kgdb over ethernet. > I am using kgdb-2.4 and linux kernel 2.6.15-5. > > <<>>The out of dmesg from target machine at the time of booting is as > follows > > eth0: RealTek RTL8139 at 0x1000, 00:16:76:6c:5c:45, IRQ 11 > eth0: Identified 8139 chip type 'RTL-8101' > kgdboe: local port 6443 > kgdboe: local IP 192.168.10.196 > kgdboe: interface eth0 > kgdboe: remote port 6442 > kgdboe: remote IP 192.168.10.194 > kgdboe: remote ethernet address ff:ff:ff:ff:ff:ff > kgdboe: device eth0 not up yet, forcing it > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 > kgdboe: carrier detect appears untrustworthy, waiting 4 seconds > kgdboe: debugging over ethernet enabled > > <<>>The following o/p is from my gdb from remote machine > > (gdb) target remote 192.168.10.196:6443 > 192.168.10.196:6443: No route to host. > (gdb) target remote 192.168.10.196:6443 > 192.168.10.196:6443: No route to host. > (gdb) target remote 192.168.10.196:22 > 192.168.10.196:22: Connection refused. > > <<>> Following are grub setting, > > title Fedora Core (2.6.15.5) > root (hd0,0) > kernel /vmlinuz-2.6.15.5 ro root=/dev/VolGroup00/LogVol00 > [EMAIL PROTECTED]/,@192.168.10.194/ console=ttyS0,115200 > initrd /initrd-2.6.15.5.img > > > My network is working fine. I am able to boot target machine when i > completely boot. > > please suggest some thing. > > > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Kgdb-bugreport mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/kgdb-bugreport
