Hi,
I compiled kernel 2.6.31.3-5 with kgdb enabled, but when I booted my
kernel, I found no kgdb code had been executed, as I understand, the
kernel should stay at some point and wait for response from another
machine, but the truth is it fully booted up just like kgdb is not
existing.
(my config file shows KGDB options are enabled:
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
and my grub/menu file is:
title kernel 2.6.31.3-5-default
kernel (hd0,0)/vmlinuz-2.6.31.3-5-default root=/dev/sda15
console=ttyS0,9600 console=tty0 kgdbwait kgdb8250=0,9600
initrd (hd0,0)/initrd-2.6.31.3-5-default
)
Regards
Jason
Following is what I can see on the screen during the boot stage, thank
you for any input:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31.3-5-default (r...@lfg2) (gcc version 4.3.2
[gcc-4_3-branch revision 141291] (SUSE Linux) ) #4 SMP Sun Jan 3
04:23:41 CST 2010
Command line: root=/dev/sda15 console=ttyS0,9600 console=tty0 kgdbwait
kgdb8250=0,9600
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000cffa8000 (usable)
BIOS-e820: 00000000cffa8000 - 00000000cffb7c00 (ACPI data)
BIOS-e820: 00000000cffb7c00 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
DMI 2.4 present.
last_pfn = 0x230000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xcffa8 max_arch_pfn = 0x400000000
init_memory_mapping: 0000000000000000-00000000cffa8000
init_memory_mapping: 0000000100000000-0000000230000000
RAMDISK: 3741b000 - 37fefae7
ACPI: RSDP 00000000000f2900 00024 (v02 DELL )
ACPI: XSDT 00000000000f2980 0004C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000000f2a88 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000cffa8000 02A90 (v01 DELL PE_SC3 00000001 MSFT 0100000E)
ACPI: FACS 00000000cffb7c00 00040
ACPI: APIC 00000000000f2b7c 000C8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000000f2c5d 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000000f2cad 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000000f2ce5 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
No NUMA configuration found
Faking a node at 0000000000000000-0000000230000000
Bootmem setup node 0 0000000000000000-0000000230000000
NODE_DATA [0000000000011000 - 0000000000044fff]
bootmap [0000000000045000 - 000000000008afff] pages 46
(8 early reservations) ==> bootmem [0000000000 - 0230000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0005cc0e6c] TEXT DATA BSS ==> [0001000000 - 0005cc0e6c]
#3 [003741b000 - 0037fefae7] RAMDISK ==> [003741b000 - 0037fefae7]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [0005cc1000 - 0005cc1234] BRK ==> [0005cc1000 - 0005cc1234]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
found SMP MP-table at [ffff8800000fe710] fe710
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00230000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x000000a0
0: 0x00000100 -> 0x000cffa8
0: 0x00100000 -> 0x00230000
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64])
IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 64-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000cffa8000 - 00000000cffb7000
PM: Registered nosave memory: 00000000cffb7000 - 00000000cffb8000
PM: Registered nosave memory: 00000000cffb8000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages at ffff880028034000, static data 83744 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065499
Policy zone: Normal
Kernel command line: root=/dev/sda15 console=ttyS0,9600 console=tty0
kgdbwait kgdb8250=0,9600
PID hash table entries: 4096 (order: 12, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 8113036k/9175040k available (2882k kernel code, 787168k
absent, 274836k reserved, 2975k data, 1484k init)
NR_IRQS:4352
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 1994.979 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer
frequency.. 3989.95 BogoMIPS (lpj=7979916)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Counters: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic counters: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose counters: 3
... counter mask: 0000000700000003
ACPI: Core revision 20090521
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 07
Booting processor 1 APIC 0x4 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.05 BogoMIPS (lpj=7980119)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/0x4 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x1 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 3990.07 BogoMIPS (lpj=7980151)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 2/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU2: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x5 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 3990.06 BogoMIPS (lpj=7980133)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 3/0x5 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU3: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Booting processor 4 APIC 0x2 ip 0x6000
Initializing CPU#4
Calibrating delay using timer specific routine.. 3990.04 BogoMIPS (lpj=7980094)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 4/0x2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
mce: CPU supports 6 MCE banks
CPU4: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
CPU4: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#4]: passed.
Booting processor 5 APIC 0x6 ip 0x6000
Initializing CPU#5
Calibrating delay using timer specific routine.. 3990.06 BogoMIPS (lpj=7980120)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 5/0x6 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
mce: CPU supports 6 MCE banks
CPU5: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
CPU5: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#5]: passed.
Booting processor 6 APIC 0x3 ip 0x6000
Initializing CPU#6
Calibrating delay using timer specific routine.. 3990.04 BogoMIPS (lpj=7980090)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 6/0x3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
mce: CPU supports 6 MCE banks
CPU6: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
CPU6: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#6]: passed.
Booting processor 7 APIC 0x7 ip 0x6000
Initializing CPU#7
Calibrating delay using timer specific routine.. 3990.08 BogoMIPS (lpj=7980169)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 7/0x7 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
mce: CPU supports 6 MCE banks
CPU7: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
CPU7: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#7]: passed.
Brought up 8 CPUs
Total of 8 processors activated (31920.39 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
PCI: Dell PowerEdge 2950 detected, enabling pci=bfsort.
bio: create slab <bio-0> at 0
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
pci 0000:06:00.3: PME# disabled
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can
enable it with 'pcie_aspm=force'
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
pci 0000:07:01.0: PME# disabled
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can
enable it with 'pcie_aspm=force'
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.2: PME# disabled
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can
enable it with 'pcie_aspm=force'
pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can
enable it with 'pcie_aspm=force'
pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0e:00.0: PME# disabled
pci 0000:0e:00.1: PME# supported from D0 D3hot D3cold
pci 0000:0e:00.1: PME# disabled
pci 0000:0e:00.0: disabling ASPM on pre-1.1 PCIe device. You can
enable it with 'pcie_aspm=force'
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can
enable it with 'pcie_aspm=force'
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 *6 7 10 11 12)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x880-0x8bf has been reserved
system 00:08: ioport range 0x8c0-0x8df has been reserved
system 00:08: ioport range 0x8e0-0x8e3 has been reserved
system 00:08: ioport range 0xc00-0xc7f has been reserved
system 00:08: ioport range 0xca0-0xca7 has been reserved
system 00:08: ioport range 0xca9-0xcab has been reserved
system 00:08: ioport range 0xcad-0xcaf has been reserved
system 00:09: ioport range 0xca8-0xca8 has been reserved
system 00:09: ioport range 0xcac-0xcac has been reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
pci 0000:0c:00.1: BAR 6: address space collision on of device
[0xfc600000-0xfc63ffff]
pci 0000:08:00.0: PCI bridge, secondary bus 0000:09
pci 0000:08:00.0: IO window: disabled
pci 0000:08:00.0: MEM window: 0xf4000000-0xf7ffffff
pci 0000:08:00.0: PREFETCH window: disabled
pci 0000:07:00.0: PCI bridge, secondary bus 0000:08
pci 0000:07:00.0: IO window: disabled
pci 0000:07:00.0: MEM window: 0xf4000000-0xf7ffffff
pci 0000:07:00.0: PREFETCH window: disabled
pci 0000:07:01.0: PCI bridge, secondary bus 0000:0a
pci 0000:07:01.0: IO window: disabled
pci 0000:07:01.0: MEM window: disabled
pci 0000:07:01.0: PREFETCH window: disabled
pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
pci 0000:06:00.0: IO window: disabled
pci 0000:06:00.0: MEM window: 0xf4000000-0xf7ffffff
pci 0000:06:00.0: PREFETCH window: disabled
pci 0000:06:00.3: PCI bridge, secondary bus 0000:0b
pci 0000:06:00.3: IO window: disabled
pci 0000:06:00.3: MEM window: disabled
pci 0000:06:00.3: PREFETCH window: disabled
pci 0000:00:02.0: PCI bridge, secondary bus 0000:06
pci 0000:00:02.0: IO window: disabled
pci 0000:00:02.0: MEM window: 0xf2000000-0xf7ffffff
pci 0000:00:02.0: PREFETCH window: disabled
pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
pci 0000:01:00.0: IO window: disabled
pci 0000:01:00.0: MEM window: 0xfc800000-0xfc9fffff
pci 0000:01:00.0: PREFETCH window: 0x000000d8000000-0x000000d80fffff
pci 0000:01:00.2: PCI bridge, secondary bus 0000:03
pci 0000:01:00.2: IO window: disabled
pci 0000:01:00.2: MEM window: disabled
pci 0000:01:00.2: PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
pci 0000:00:03.0: IO window: disabled
pci 0000:00:03.0: MEM window: 0xfc700000-0xfc9fffff
pci 0000:00:03.0: PREFETCH window: 0x000000d8000000-0x000000d80fffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:0c
pci 0000:00:04.0: IO window: 0xe000-0xefff
pci 0000:00:04.0: MEM window: 0xfc500000-0xfc6fffff
pci 0000:00:04.0: PREFETCH window: 0xd8100000-0xd81fffff
pci 0000:00:05.0: PCI bridge, secondary bus 0000:0d
pci 0000:00:05.0: IO window: disabled
pci 0000:00:05.0: MEM window: disabled
pci 0000:00:05.0: PREFETCH window: disabled
pci 0000:00:06.0: PCI bridge, secondary bus 0000:0e
pci 0000:00:06.0: IO window: 0xd000-0xdfff
pci 0000:00:06.0: MEM window: 0xfc300000-0xfc4fffff
pci 0000:00:06.0: PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:0f
pci 0000:00:07.0: IO window: disabled
pci 0000:00:07.0: MEM window: disabled
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
pci 0000:04:00.0: IO window: disabled
pci 0000:04:00.0: MEM window: 0xf8000000-0xfbffffff
pci 0000:04:00.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: 0xf8000000-0xfbffffff
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:10
pci 0000:00:1e.0: IO window: 0xc000-0xcfff
pci 0000:00:1e.0: MEM window: 0xfc100000-0xfc2fffff
pci 0000:00:1e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 12114k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1262470271.151:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15869
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
registered taskstats version 1
Freeing unused kernel memory: 1484k freed
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
SCSI subsystem initialized
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0
megaraid_sas 0000:02:0e.0: PCI INT A -> GSI 78 (level, low) -> IRQ 78
megasas: FW now in Ready state
scsi0 : LSI SAS based MegaRAID driver
scsi 0:0:0:0: Direct-Access FUJITSU MAX3147RC D206 PQ: 0 ANSI: 3
scsi 0:0:1:0: Direct-Access FUJITSU MAX3147RC D206 PQ: 0 ANSI: 3
scsi 0:0:8:0: Enclosure DP BACKPLANE 1.00 PQ: 0 ANSI: 5
scsi scan: INQUIRY result too short (5), using 36
scsi 0:2:0:0: Direct-Access DELL PERC 5/i 1.00 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi1 : ata_piix
scsi2 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata1.00: ATAPI: HL-DT-ST DVD-ROM GDR-8084N, 1.01, max UDMA/33
ata1.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8084N 1.01 PQ: 0 ANSI: 5
Uniform Multi-Platform E-IDE driver
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
udevd version 128 started
sd 0:2:0:0: [sda] 570949632 512-byte logical blocks: (292 GB/272 GiB)
usbcore: registered new interface driver usbfs
sd 0:2:0:0: [sda] Test WP failed, assume Write Enabled
sd 0:2:0:0: [sda] Asking for cache data failed
sd 0:2:0:0: [sda] Assuming drive cache: write through
usbcore: registered new interface driver hub
sd 0:2:0:0: [sda] Test WP failed, assume Write Enabled
sd 0:2:0:0: [sda] Asking for cache data failed
sd 0:2:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3 < sda5 sda6 sda7
usbcore: registered new device driver usb
sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 >
sd 0:2:0:0: [sda] Test WP failed, assume Write Enabled
sd 0:2:0:0: [sda] Asking for cache data failed
sd 0:2:0:0: [sda] Assuming drive cache: write through
sd 0:2:0:0: [sda] Attached SCSI disk
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfca00000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.3-5-default ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000bce0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.3-5-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bcc0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31.3-5-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.2: UHCI Host Controller
usb 1-1: new high speed USB device using ehci_hcd and address 2
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
usb 1-1: New USB device found, idVendor=413c, idProduct=a001
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 2 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 4
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bca0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb 1-5: New USB device found, idVendor=04b4, idProduct=6560
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb usb4: Manufacturer: Linux 2.6.31.3-5-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb 1-1.1: new full speed USB device using ehci_hcd and address 5
usb usb4: configuration #1 chosen from 1 choice
usb 1-1.1: New USB device found, idVendor=413c, idProduct=0000
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: DRAC5
usb 1-1.1: Manufacturer: Dell
usb 1-1.1: SerialNumber: 0000000
usb 1-1.1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Dell DRAC5 as
/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input0
generic-usb 0003:413C:0000.0001: input,hidraw0: USB HID v1.10 Keyboard
[Dell DRAC5] on usb-0000:00:1d.7-1.1/input0
input: Dell DRAC5 as
/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.1/input/input1
generic-usb 0003:413C:0000.0002: input,hidraw1: USB HID v1.10 Mouse
[Dell DRAC5] on usb-0000:00:1d.7-1.1/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 1-1.2: new high speed USB device using ehci_hcd and address 6
usb 1-1.2: New USB device found, idVendor=413c, idProduct=0001
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: DRAC5 VIRTUAL MEDIA
usb 1-1.2: Manufacturer: DELL INC.
usb 1-1.2: SerialNumber: 1028 123456
usb 1-1.2: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-1: new low speed USB device using uhci_hcd and address 2
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda15, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
usb 3-1: New USB device found, idVendor=0624, idProduct=0294
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Dell 03R874
usb 3-1: Manufacturer: Avocent
usb 3-1: configuration #1 chosen from 1 choice
input: Avocent Dell 03R874 as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2
generic-usb 0003:0624:0294.0003: input,hidraw2: USB HID v1.10 Keyboard
[Avocent Dell 03R874] on usb-0000:00:1d.1-1/input0
input: Avocent Dell 03R874 as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input3
generic-usb 0003:0624:0294.0004: input,hidraw3: USB HID v1.10 Mouse
[Avocent Dell 03R874] on usb-0000:00:1d.1-1/input1
udevd version 128 started
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
EDAC MC: Ver: 2.1.0 Oct 21 2009
input: PC Speaker as /devices/platform/pcspkr/input/input4
EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC
PCI controller': DEV '0000:00:10.0' (POLLED)
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
e1000e 0000:0e:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
intel_rng: FWH not detected
Initializing USB Mass Storage driver...
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
scsi3 : SCSI emulation for USB Mass Storage devices
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
USB Mass Storage support registered.
0000:0e:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:15:17:1d:de:00
0000:0e:00.0: eth0: Intel(R) PRO/1000 Network Connection
QLogic Fibre Channel HBA Driver: 8.03.01-k4
0000:0e:00.0: eth0: MAC: 0, PHY: 4, PBA No: c57721-005
qla2xxx 0000:0c:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
qla2xxx 0000:0c:00.0: Found an ISP2432, irq 16, iobase 0xffffc90000c34000
e1000e 0000:0e:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
iTCO_vendor_support: vendor-support=0
scsi 0:0:8:0: Attached scsi generic sg0 type 13
sd 0:2:0:0: Attached scsi generic sg1 type 0
sr 1:0:0:0: Attached scsi generic sg2 type 5
qla2xxx 0000:0c:00.0: Configuring PCI space...
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x0860)
qla2xxx 0000:0c:00.0: Configure NVRAM parameters...
qla2xxx 0000:0c:00.0: Verifying loaded RISC code...
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
qla2xxx 0000:0c:00.0: firmware: requesting ql2400_fw.bin
0000:0e:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:15:17:1d:de:01
0000:0e:00.1: eth1: Intel(R) PRO/1000 Network Connection
0000:0e:00.1: eth1: MAC: 0, PHY: 4, PBA No: c57721-005
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.1 (May 6, 2009)
bnx2 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
qla2xxx 0000:0c:00.0: FW: Loading via request-firmware...
ses 0:0:8:0: Attached Enclosure device
floppy0: no floppy controllers found
qla2xxx 0000:0c:00.0: Allocated (64 KB) for EFT...
qla2xxx 0000:0c:00.0: Allocated (1285 KB) for firmware dump...
scsi5 : qla2xxx
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw
qla2xxx 0000:0c:00.0: LIP reset occurred (f700).
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-rv2p-06-4.6.16.fw
qla2xxx 0000:0c:00.0: LIP occurred (f700).
qla2xxx 0000:0c:00.0: LIP reset occurred (f7f7).
eth2: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit
133MHz found at mem f8000000, IRQ 16, node addr 00:19:b9:c1:24:83
bnx2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw
bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-rv2p-06-4.6.16.fw
qla2xxx 0000:0c:00.0: LOOP UP detected (4 Gbps).
eth3: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit
133MHz found at mem f4000000, IRQ 16, node addr 00:19:b9:c1:24:85
scsi 5:0:0:0: Direct-Access IBM 1814 FAStT 2916 PQ: 0 ANSI: 5
qla2xxx 0000:0c:00.0:
QLogic Fibre Channel HBA Driver: 8.03.01-k4
QLogic QLE2462 - PCI-Express Dual Channel 4Gb Fibre Channel HBA
ISP2432: PCIe (2.5GT/s x4) @ 0000:0c:00.0 hdma+, host#=5, fw=4.04.05 (486)
qla2xxx 0000:0c:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
qla2xxx 0000:0c:00.1: Found an ISP2432, irq 17, iobase 0xffffc900117b6000
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: Embedded Enclosure Device
sd 5:0:0:0: Failed to get diagnostic page 0x8000002
qla2xxx 0000:0c:00.1: Configuring PCI space...
sd 5:0:0:0: [sdb] 52428800 512-byte logical blocks: (26.8 GB/25.0 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
qla2xxx 0000:0c:00.1: Configure NVRAM parameters...
qla2xxx 0000:0c:00.1: Verifying loaded RISC code...
qla2xxx 0000:0c:00.1: FW: Loading via request-firmware...
qla2xxx 0000:0c:00.1: Allocated (64 KB) for EFT...
qla2xxx 0000:0c:00.1: Allocated (1285 KB) for firmware dump...
scsi6 : qla2xxx
floppy0: no floppy controllers found
scsi 3:0:0:0: CD-ROM Dell Virtual CDROM 123 PQ: 0 ANSI: 0 CCS
scsi 4:0:0:0: Direct-Access Dell Virtual Floppy 123 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: Failed to bind enclosure -19
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports
DPO and FUA
sr1: scsi-1 drive
sd 4:0:0:0: [sdc] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg4 type 0
sr 3:0:0:0: Attached scsi generic sg5 type 5
scsi 5:0:0:1: Direct-Access IBM 1814 FAStT 2916 PQ: 0 ANSI: 5
sdb: sdb1
sd 5:0:0:1: Attached scsi generic sg6 type 0
sd 5:0:0:1: [sdd] 52428800 512-byte logical blocks: (26.8 GB/25.0 GiB)
sd 5:0:0:1: Embedded Enclosure Device
sd 5:0:0:0: [sdb] Attached SCSI disk
sd 5:0:0:1: [sdd] Write Protect is off
scsi 5:0:0:2: Direct-Access IBM 1814 FAStT 2916 PQ: 0 ANSI: 5
sd 5:0:0:2: Attached scsi generic sg7 type 0
sd 5:0:0:2: Embedded Enclosure Device
sd 5:0:0:2: [sde] 52428800 512-byte logical blocks: (26.8 GB/25.0 GiB)
sd 5:0:0:1: [sdd] Write cache: enabled, read cache: enabled, supports
DPO and FUA
sdd:
sd 5:0:0:2: [sde] Write Protect is off
sd 5:0:0:2: [sde] Write cache: enabled, read cache: enabled, supports
DPO and FUA
sdd1
scsi 5:0:0:3: Direct-Access IBM 1814 FAStT 2916 PQ: 0 ANSI: 5
sd 5:0:0:3: Attached scsi generic sg8 type 0
sd 5:0:0:3: Embedded Enclosure Device
sd 5:0:0:3: [sdf] 125829120 512-byte logical blocks: (64.4 GB/60.0 GiB)
sd 5:0:0:3: [sdf] Write Protect is off
sd 5:0:0:3: [sdf] Write cache: enabled, read cache: enabled, supports
DPO and FUA
sde:
sd 5:0:0:1: [sdd] Attached SCSI disk
sde1
sdf: sdf1
sd 5:0:0:2: [sde] Attached SCSI disk
sd 5:0:0:3: [sdf] Attached SCSI disk
qla2xxx 0000:0c:00.1:
QLogic Fibre Channel HBA Driver: 8.03.01-k4
QLogic QLE2462 - PCI-Express Dual Channel 4Gb Fibre Channel HBA
ISP2432: PCIe (2.5GT/s x4) @ 0000:0c:00.1 hdma+, host#=6, fw=4.04.05 (486)
Adding 16779884k swap on /dev/sda2. Priority:-1 extents:1 across:16779884k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
fuse init (API version 7.12)
microcode: CPU0 sig=0x6f7, pf=0x40, revision=0x60
platform microcode: firmware: requesting intel-ucode/06-0f-07
microcode: CPU1 sig=0x6f7, pf=0x40, revision=0x60
platform microcode: firmware: requesting intel-ucode/06-0f-07
microcode: CPU2 sig=0x6f7, pf=0x40, revision=0x60
platform microcode: firmware: requesting intel-ucode/06-0f-07
microcode: CPU3 sig=0x6f7, pf=0x40, revision=0x60
platform microcode: firmware: requesting intel-ucode/06-0f-07
microcode: CPU4 sig=0x6f7, pf=0x40, revision=0x60
platform microcode: firmware: requesting intel-ucode/06-0f-07
microcode: CPU5 sig=0x6f7, pf=0x40, revision=0x60
platform microcode: firmware: requesting intel-ucode/06-0f-07
microcode: CPU6 sig=0x6f7, pf=0x40, revision=0x60
platform microcode: firmware: requesting intel-ucode/06-0f-07
microcode: CPU7 sig=0x6f7, pf=0x40, revision=0x60
platform microcode: firmware: requesting intel-ucode/06-0f-07
Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
microcode: CPU0 updated to revision 0x69, date = 2007-09-17
microcode: CPU1 updated to revision 0x69, date = 2007-09-17
microcode: CPU2 updated to revision 0x69, date = 2007-09-17
microcode: CPU3 updated to revision 0x69, date = 2007-09-17
microcode: CPU4 updated to revision 0x69, date = 2007-09-17
microcode: CPU5 updated to revision 0x69, date = 2007-09-17
microcode: CPU6 updated to revision 0x69, date = 2007-09-17
microcode: CPU7 updated to revision 0x69, date = 2007-09-17
ib_ipoib: Unknown symbol icmpv6_send
bnx2: eth2: using MSI
NET: Registered protocol family 17
Welcome to SUSE Linux Enterprise Server 11 (x86_64) - Kernel
2.6.31.3-5-default (ttyS0).
localhost login:
------------------------------------------------------------------------------
This SF.Net email is sponsored by the Verizon Developer Community
Take advantage of Verizon's best-in-class app development support
A streamlined, 14 day to market process makes app distribution fast and easy
Join now and get one step closer to millions of Verizon customers
http://p.sf.net/sfu/verizon-dev2dev
_______________________________________________
Kgdb-bugreport mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/kgdb-bugreport
