Allow kgdboc to work on sparc hardware with the Zilog serial chips.
Signed-off-by: Jason Wessel <jason.wes...@windriver.com>
Acked-by: David S. Miller <da...@davemloft.net>
---
drivers/serial/sunzilog.c | 50 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 50 insertions(+), 0 deletions(-)
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 2c7a66a..978b3ce 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -102,6 +102,8 @@ struct uart_sunzilog_port {
#endif
};
+static void sunzilog_putchar(struct uart_port *port, int ch);
+
#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem
*)((PORT)->membase))
#define UART_ZILOG(PORT) ((struct uart_sunzilog_port *)(PORT))
@@ -996,6 +998,50 @@ static int sunzilog_verify_port(struct uart_port *port,
struct serial_struct *se
return -EINVAL;
}
+#ifdef CONFIG_CONSOLE_POLL
+static int sunzilog_get_poll_char(struct uart_port *port)
+{
+ unsigned char ch, r1;
+ struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+ struct zilog_channel __iomem *channel
+ = ZILOG_CHANNEL_FROM_PORT(&up->port);
+
+
+ r1 = read_zsreg(channel, R1);
+ if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
+ writeb(ERR_RES, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+ }
+
+ ch = readb(&channel->control);
+ ZSDELAY();
+
+ /* This funny hack depends upon BRK_ABRT not interfering
+ * with the other bits we care about in R1.
+ */
+ if (ch & BRK_ABRT)
+ r1 |= BRK_ABRT;
+
+ if (!(ch & Rx_CH_AV))
+ return NO_POLL_CHAR;
+
+ ch = readb(&channel->data);
+ ZSDELAY();
+
+ ch &= up->parity_mask;
+ return ch;
+}
+
+static void sunzilog_put_poll_char(struct uart_port *port,
+ unsigned char ch)
+{
+ struct uart_sunzilog_port *up = (struct uart_sunzilog_port *)port;
+
+ sunzilog_putchar(&up->port, ch);
+}
+#endif /* CONFIG_CONSOLE_POLL */
+
static struct uart_ops sunzilog_pops = {
.tx_empty = sunzilog_tx_empty,
.set_mctrl = sunzilog_set_mctrl,
@@ -1013,6 +1059,10 @@ static struct uart_ops sunzilog_pops = {
.request_port = sunzilog_request_port,
.config_port = sunzilog_config_port,
.verify_port = sunzilog_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = sunzilog_get_poll_char,
+ .poll_put_char = sunzilog_put_poll_char,
+#endif
};
static int uart_chip_count;
--
1.6.3.3
------------------------------------------------------------------------------
_______________________________________________
Kgdb-bugreport mailing list
Kgdb-bugreport@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/kgdb-bugreport
