It's all pretty straightforward, except for TXIM interrupt. The interrupt has meaning "ready to transmit", so it's almost always raised, and the only way to silence it is to mask it. But that's OK, ops->start_tx will unmask it.
Signed-off-by: Anton Vorontsov <[email protected]> --- drivers/tty/serial/amba-pl011.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 88e2df2..7522d97 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1308,6 +1308,18 @@ static void pl011_put_poll_char(struct uart_port *port, writew(ch, uap->port.membase + UART01x_DR); } +static void pl011_clear_irqs(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned char __iomem *regs = uap->port.membase; + + writew(readw(regs + UART011_MIS), regs + UART011_ICR); + /* + * There is no way to clear TXIM, this is "ready to transmit IRQ", so + * we simply mask it. ops->start_tx will unmask it. + */ + writew(readw(regs + UART011_IMSC) & ~UART011_TXIM, regs + UART011_IMSC); +} #endif /* CONFIG_CONSOLE_POLL */ static int pl011_hwinit(struct uart_port *port) @@ -1713,6 +1725,7 @@ static struct uart_ops amba_pl011_pops = { .poll_init = pl011_hwinit, .poll_get_char = pl011_get_poll_char, .poll_put_char = pl011_put_poll_char, + .clear_irqs = pl011_clear_irqs, #endif }; -- 1.7.11.5 ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Kgdb-bugreport mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/kgdb-bugreport
