Implement the necessary callbacks to allow the 8250 console driver
to perform as a non-BKL console. Remove the implementation for the
legacy console callback (write) and add implementations for the
non-BKL consoles (write_atomic, write_thread, port_lock) and add
CON_NO_BKL to the initial flags.
This is an all-in-one commit meant only for testing the new printk
non-BKL infrastructure. It is not meant to be included mainline in
this form. In particular, it includes mainline driver fixes that
need to be submitted individually.
Although non-BKL consoles can coexist with legacy consoles, you
will only receive all the benefits of the non-BKL consoles, if
this console driver is the only console. That means no netconsole,
no tty1, no earlyprintk, no earlycon. Just the uart8250.
For example: console=ttyS0,115200
Signed-off-by: John Ogness <john.ogn...@linutronix.de>
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 287153d32536..d8da34bb9ae3 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -177,12 +177,154 @@ static inline void serial_dl_write(struct uart_8250_port
*up, int value)
up->dl_write(up, value);
}
+static inline bool serial8250_is_console(struct uart_port *port)
+{
+ return uart_console(port) &&
!hlist_unhashed_lockless(&port->cons->node);
+}
+
+static inline void serial8250_init_wctxt(struct cons_write_context *wctxt,
+ struct console *cons)
+{
+ struct cons_context *ctxt = &ACCESS_PRIVATE(wctxt, ctxt);
+
+ memset(wctxt, 0, sizeof(*wctxt));
+ ctxt->console = cons;
+ ctxt->prio = CONS_PRIO_NORMAL;
+ /* Both require the port lock, so they cannot clobber each other. */
+ ctxt->thread = 1;
+}
+
+static inline void serial8250_console_acquire(struct cons_write_context *wctxt,
+ struct console *cons)
+{
+ serial8250_init_wctxt(wctxt, cons);
+ while (!console_try_acquire(wctxt)) {
+ cpu_relax();
+ serial8250_init_wctxt(wctxt, cons);
+ }
+}
+
+static inline void serial8250_enter_unsafe(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+
+ lockdep_assert_held_once(&port->lock);
+
+ for (;;) {
+ up->cookie = console_srcu_read_lock();
+
+ serial8250_console_acquire(&up->wctxt, port->cons);
+
+ if (console_enter_unsafe(&up->wctxt))
+ break;
+
+ console_srcu_read_unlock(up->cookie);
+ cpu_relax();
+ }
+}
+
+static inline void serial8250_exit_unsafe(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+
+ lockdep_assert_held_once(&port->lock);
+
+ /*
+ * FIXME: The 8250 driver does not support hostile takeovers
+ * in the unsafe section.
+ */
+ if (!WARN_ON_ONCE(!console_exit_unsafe(&up->wctxt)))
+ WARN_ON_ONCE(!console_release(&up->wctxt));
+
+ console_srcu_read_unlock(up->cookie);
+}
+
+static inline int serial8250_in_IER(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+ bool is_console;
+ int ier;
+
+ is_console = serial8250_is_console(port);
+
+ if (is_console)
+ serial8250_enter_unsafe(up);
+
+ ier = serial_in(up, UART_IER);
+
+ if (is_console)
+ serial8250_exit_unsafe(up);
+
+ return ier;
+}
+
+static inline bool __serial8250_set_IER(struct uart_8250_port *up,
+ struct cons_write_context *wctxt,
+ int ier)
+{
+ if (wctxt && !console_can_proceed(wctxt))
+ return false;
+ serial_out(up, UART_IER, ier);
+ return true;
+}
+
+static inline void serial8250_set_IER(struct uart_8250_port *up, int ier)
+{
+ struct uart_port *port = &up->port;
+ bool is_console;
+
+ is_console = serial8250_is_console(port);
+
+ if (is_console) {
+ serial8250_enter_unsafe(up);
+ __serial8250_set_IER(up, &up->wctxt, ier);
+ serial8250_exit_unsafe(up);
+ } else {
+ __serial8250_set_IER(up, NULL, ier);
+ }
+}
+
+static inline bool __serial8250_clear_IER(struct uart_8250_port *up,
+ struct cons_write_context *wctxt,
+ int *prior)
+{
+ unsigned int clearval = 0;
+
+ if (up->capabilities & UART_CAP_UUE)
+ clearval = UART_IER_UUE;
+
+ *prior = serial_in(up, UART_IER);
+ if (wctxt && !console_can_proceed(wctxt))
+ return false;
+ serial_out(up, UART_IER, clearval);
+ return true;
+}
+
+static inline int serial8250_clear_IER(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+ bool is_console;
+ int prior;
+
+ is_console = serial8250_is_console(port);
+
+ if (is_console) {
+ serial8250_enter_unsafe(up);
+ __serial8250_clear_IER(up, &up->wctxt, &prior);
+ serial8250_exit_unsafe(up);
+ } else {
+ __serial8250_clear_IER(up, NULL, &prior);
+ }
+
+ return prior;
+}
+
static inline bool serial8250_set_THRI(struct uart_8250_port *up)
{
if (up->ier & UART_IER_THRI)
return false;
up->ier |= UART_IER_THRI;
- serial_out(up, UART_IER, up->ier);
+ serial8250_set_IER(up, up->ier);
return true;
}
@@ -191,7 +333,7 @@ static inline bool serial8250_clear_THRI(struct
uart_8250_port *up)
if (!(up->ier & UART_IER_THRI))
return false;
up->ier &= ~UART_IER_THRI;
- serial_out(up, UART_IER, up->ier);
+ serial8250_set_IER(up, up->ier);
return true;
}
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c
b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 9d2a7856784f..7cc6b527c088 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -278,7 +278,7 @@ static void __aspeed_vuart_set_throttle(struct
uart_8250_port *up,
up->ier &= ~irqs;
if (!throttle)
up->ier |= irqs;
- serial_out(up, UART_IER, up->ier);
+ serial8250_set_IER(up, up->ier);
}
static void aspeed_vuart_set_throttle(struct uart_port *port, bool throttle)
{
diff --git a/drivers/tty/serial/8250/8250_bcm7271.c
b/drivers/tty/serial/8250/8250_bcm7271.c
index ed5a94747692..adb1a3247807 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -606,8 +606,10 @@ static int brcmuart_startup(struct uart_port *port)
* Disable the Receive Data Interrupt because the DMA engine
* will handle this.
*/
+ spin_lock_irq(&port->lock);
up->ier &= ~UART_IER_RDI;
- serial_port_out(port, UART_IER, up->ier);
+ serial8250_set_IER(up, up->ier);
+ spin_unlock_irq(&port->lock);
priv->tx_running = false;
priv->dma.rx_dma = NULL;
@@ -787,6 +789,12 @@ static int brcmuart_handle_irq(struct uart_port *p)
spin_lock_irqsave(&p->lock, flags);
status = serial_port_in(p, UART_LSR);
if ((status & UART_LSR_DR) == 0) {
+ bool is_console;
+
+ is_console = serial8250_is_console(port);
+
+ if (is_console)
+ serial8250_enter_unsafe(p);
ier = serial_port_in(p, UART_IER);
/*
@@ -807,6 +815,9 @@ static int brcmuart_handle_irq(struct uart_port *p)
serial_port_in(p, UART_RX);
}
+ if (is_console)
+ serial8250_exit_unsafe(p);
+
handled = 1;
}
spin_unlock_irqrestore(&p->lock, flags);
@@ -844,12 +855,22 @@ static enum hrtimer_restart brcmuart_hrtimer_func(struct
hrtimer *t)
/* re-enable receive unless upper layer has disabled it */
if ((up->ier & (UART_IER_RLSI | UART_IER_RDI)) ==
(UART_IER_RLSI | UART_IER_RDI)) {
+ bool is_console;
+
+ is_console = serial8250_is_console(port);
+
+ if (is_console)
+ serial8250_enter_unsafe(p);
+
status = serial_port_in(p, UART_IER);
status |= (UART_IER_RLSI | UART_IER_RDI);
serial_port_out(p, UART_IER, status);
status = serial_port_in(p, UART_MCR);
status |= UART_MCR_RTS;
serial_port_out(p, UART_MCR, status);
+
+ if (is_console)
+ serial8250_exit_unsafe(p);
}
spin_unlock_irqrestore(&p->lock, flags);
return HRTIMER_NORESTART;
diff --git a/drivers/tty/serial/8250/8250_core.c
b/drivers/tty/serial/8250/8250_core.c
index ab63c308be0a..688ecfc6e1d5 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -256,6 +256,7 @@ static void serial8250_timeout(struct timer_list *t)
static void serial8250_backup_timeout(struct timer_list *t)
{
struct uart_8250_port *up = from_timer(up, t, timer);
+ struct uart_port *port = &up->port;
unsigned int iir, ier = 0, lsr;
unsigned long flags;
@@ -266,8 +267,18 @@ static void serial8250_backup_timeout(struct timer_list *t)
* based handler.
*/
if (up->port.irq) {
+ bool is_console;
+
+ is_console = serial8250_is_console(port);
+
+ if (is_console)
+ serial8250_enter_unsafe(up);
+
ier = serial_in(up, UART_IER);
serial_out(up, UART_IER, 0);
+
+ if (is_console)
+ serial8250_exit_unsafe(up);
}
iir = serial_in(up, UART_IIR);
@@ -290,7 +301,7 @@ static void serial8250_backup_timeout(struct timer_list *t)
serial8250_tx_chars(up);
if (up->port.irq)
- serial_out(up, UART_IER, ier);
+ serial8250_set_IER(up, ier);
spin_unlock_irqrestore(&up->port.lock, flags);
@@ -576,12 +587,30 @@ serial8250_register_ports(struct uart_driver *drv, struct
device *dev)
#ifdef CONFIG_SERIAL_8250_CONSOLE
-static void univ8250_console_write(struct console *co, const char *s,
- unsigned int count)
+static void univ8250_console_port_lock(struct console *con, bool do_lock,
unsigned long *flags)
+{
+ struct uart_8250_port *up = &serial8250_ports[con->index];
+
+ if (do_lock)
+ spin_lock_irqsave(&up->port.lock, *flags);
+ else
+ spin_unlock_irqrestore(&up->port.lock, *flags);
+}
+
+static bool univ8250_console_write_atomic(struct console *co,
+ struct cons_write_context *wctxt)
+{
+ struct uart_8250_port *up = &serial8250_ports[co->index];
+
+ return serial8250_console_write_atomic(up, wctxt);
+}
+
+static bool univ8250_console_write_thread(struct console *co,
+ struct cons_write_context *wctxt)
{
struct uart_8250_port *up = &serial8250_ports[co->index];
- serial8250_console_write(up, s, count);
+ return serial8250_console_write_thread(up, wctxt);
}
static int univ8250_console_setup(struct console *co, char *options)
@@ -669,12 +698,14 @@ static int univ8250_console_match(struct console *co,
char *name, int idx,
static struct console univ8250_console = {
.name = "ttyS",
- .write = univ8250_console_write,
+ .write_atomic = univ8250_console_write_atomic,
+ .write_thread = univ8250_console_write_thread,
+ .port_lock = univ8250_console_port_lock,
.device = uart_console_device,
.setup = univ8250_console_setup,
.exit = univ8250_console_exit,
.match = univ8250_console_match,
- .flags = CON_PRINTBUFFER | CON_ANYTIME,
+ .flags = CON_PRINTBUFFER | CON_ANYTIME | CON_NO_BKL,
.index = -1,
.data = &serial8250_reg,
};
@@ -962,7 +993,7 @@ static void serial_8250_overrun_backoff_work(struct
work_struct *work)
spin_lock_irqsave(&port->lock, flags);
up->ier |= UART_IER_RLSI | UART_IER_RDI;
up->port.read_status_mask |= UART_LSR_DR;
- serial_out(up, UART_IER, up->ier);
+ serial8250_set_IER(up, up->ier);
spin_unlock_irqrestore(&port->lock, flags);
}
diff --git a/drivers/tty/serial/8250/8250_exar.c
b/drivers/tty/serial/8250/8250_exar.c
index 64770c62bbec..ccb70b20b1f4 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -185,6 +185,10 @@ static void xr17v35x_set_divisor(struct uart_port *p,
unsigned int baud,
static int xr17v35x_startup(struct uart_port *port)
{
+ struct uart_8250_port *up = up_to_u8250p(port);
+
+ spin_lock_irq(&port->lock);
+
/*
* First enable access to IER [7:5], ISR [5:4], FCR [5:4],
* MCR [7:5] and MSR [7:0]
@@ -195,7 +199,9 @@ static int xr17v35x_startup(struct uart_port *port)
* Make sure all interrups are masked until initialization is
* complete and the FIFOs are cleared
*/
- serial_port_out(port, UART_IER, 0);
+ serial8250_set_IER(up, 0);
+
+ spin_unlock_irq(&port->lock);
return serial8250_do_startup(port);
}
diff --git a/drivers/tty/serial/8250/8250_fsl.c
b/drivers/tty/serial/8250/8250_fsl.c
index 8aad15622a2e..74bb85b705e7 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -58,7 +58,8 @@ int fsl8250_handle_irq(struct uart_port *port)
if ((orig_lsr & UART_LSR_OE) && (up->overrun_backoff_time_ms > 0)) {
unsigned long delay;
- up->ier = port->serial_in(port, UART_IER);
+ up->ier = serial8250_in_IER(up);
+
if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) {
port->ops->stop_rx(port);
} else {
diff --git a/drivers/tty/serial/8250/8250_ingenic.c
b/drivers/tty/serial/8250/8250_ingenic.c
index 617b8ce60d6b..548904c3d11b 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -171,6 +171,7 @@ OF_EARLYCON_DECLARE(x1000_uart, "ingenic,x1000-uart",
static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
{
+ struct uart_8250_port *up = up_to_u8250p(p);
int ier;
switch (offset) {
@@ -192,7 +193,7 @@ static void ingenic_uart_serial_out(struct uart_port *p,
int offset, int value)
* If we have enabled modem status IRQs we should enable
* modem mode.
*/
- ier = p->serial_in(p, UART_IER);
+ ier = serial8250_in_IER(up);
if (ier & UART_IER_MSI)
value |= UART_MCR_MDCE | UART_MCR_FCM;
diff --git a/drivers/tty/serial/8250/8250_mtk.c
b/drivers/tty/serial/8250/8250_mtk.c
index fb1d5ec0940e..bf7ab55c8923 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -222,12 +222,38 @@ static void mtk8250_shutdown(struct uart_port *port)
static void mtk8250_disable_intrs(struct uart_8250_port *up, int mask)
{
- serial_out(up, UART_IER, serial_in(up, UART_IER) & (~mask));
+ struct uart_port *port = &up->port;
+ bool is_console;
+ int ier;
+
+ is_console = serial8250_is_console(port);
+
+ if (is_console)
+ serial8250_enter_unsafe(up);
+
+ ier = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, ier & (~mask));
+
+ if (is_console)
+ serial8250_exit_unsafe(up);
}
static void mtk8250_enable_intrs(struct uart_8250_port *up, int mask)
{
- serial_out(up, UART_IER, serial_in(up, UART_IER) | mask);
+ struct uart_port *port = &up->port;
+ bool is_console;
+ int ier;
+
+ is_console = serial8250_is_console(port);
+
+ if (is_console)
+ serial8250_enter_unsafe(up);
+
+ ier = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, ier | mask);
+
+ if (is_console)
+ serial8250_exit_unsafe(up);
}
static void mtk8250_set_flow_ctrl(struct uart_8250_port *up, int mode)
diff --git a/drivers/tty/serial/8250/8250_omap.c
b/drivers/tty/serial/8250/8250_omap.c
index 734f092ef839..bfa50a26349d 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -334,8 +334,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
/* drop TCR + TLR access, we setup XON/XOFF later */
serial8250_out_MCR(up, mcr);
-
- serial_out(up, UART_IER, up->ier);
+ serial8250_set_IER(up, up->ier);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
serial_dl_write(up, priv->quot);
@@ -523,16 +522,21 @@ static void omap_8250_pm(struct uart_port *port, unsigned
int state,
u8 efr;
pm_runtime_get_sync(port->dev);
+
+ spin_lock_irq(&port->lock);
+
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
efr = serial_in(up, UART_EFR);
serial_out(up, UART_EFR, efr | UART_EFR_ECB);
serial_out(up, UART_LCR, 0);
- serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0);
+ serial8250_set_IER(up, (state != 0) ? UART_IERX_SLEEP : 0);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
serial_out(up, UART_EFR, efr);
serial_out(up, UART_LCR, 0);
+ spin_unlock_irq(&port->lock);
+
pm_runtime_mark_last_busy(port->dev);
pm_runtime_put_autosuspend(port->dev);
}
@@ -649,7 +653,8 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
if ((lsr & UART_LSR_OE) && up->overrun_backoff_time_ms > 0) {
unsigned long delay;
- up->ier = port->serial_in(port, UART_IER);
+ spin_lock(&port->lock);
+ up->ier = serial8250_in_IER(up);
if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) {
port->ops->stop_rx(port);
} else {
@@ -658,6 +663,7 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
*/
cancel_delayed_work(&up->overrun_backoff);
}
+ spin_unlock(&port->lock);
delay = msecs_to_jiffies(up->overrun_backoff_time_ms);
schedule_delayed_work(&up->overrun_backoff, delay);
@@ -707,8 +713,10 @@ static int omap_8250_startup(struct uart_port *port)
if (ret < 0)
goto err;
+ spin_lock_irq(&port->lock);
up->ier = UART_IER_RLSI | UART_IER_RDI;
- serial_out(up, UART_IER, up->ier);
+ serial8250_set_IER(up, up->ier);
+ spin_unlock_irq(&port->lock);
#ifdef CONFIG_PM
up->capabilities |= UART_CAP_RPM;
@@ -748,8 +756,10 @@ static void omap_8250_shutdown(struct uart_port *port)
if (priv->habit & UART_HAS_EFR2)
serial_out(up, UART_OMAP_EFR2, 0x0);
+ spin_lock_irq(&port->lock);
up->ier = 0;
- serial_out(up, UART_IER, 0);
+ serial8250_set_IER(up, 0);
+ spin_unlock_irq(&port->lock);
if (up->dma)
serial8250_release_dma(up);
@@ -797,7 +807,7 @@ static void omap_8250_unthrottle(struct uart_port *port)
up->dma->rx_dma(up);
up->ier |= UART_IER_RLSI | UART_IER_RDI;
port->read_status_mask |= UART_LSR_DR;
- serial_out(up, UART_IER, up->ier);
+ serial8250_set_IER(up, up->ier);
spin_unlock_irqrestore(&port->lock, flags);
pm_runtime_mark_last_busy(port->dev);
@@ -956,7 +966,7 @@ static void __dma_rx_complete(void *param)
__dma_rx_do_complete(p);
if (!priv->throttled) {
p->ier |= UART_IER_RLSI | UART_IER_RDI;
- serial_out(p, UART_IER, p->ier);
+ serial8250_set_IER(p, p->ier);
if (!(priv->habit & UART_HAS_EFR2))
omap_8250_rx_dma(p);
}
@@ -1013,7 +1023,7 @@ static int omap_8250_rx_dma(struct uart_8250_port *p)
* callback to run.
*/
p->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
- serial_out(p, UART_IER, p->ier);
+ serial8250_set_IER(p, p->ier);
}
goto out;
}
@@ -1226,12 +1236,12 @@ static void am654_8250_handle_rx_dma(struct
uart_8250_port *up, u8 iir,
* periodic timeouts, re-enable interrupts.
*/
up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
- serial_out(up, UART_IER, up->ier);
+ serial8250_set_IER(up, up->ier);
omap_8250_rx_dma_flush(up);
serial_in(up, UART_IIR);
serial_out(up, UART_OMAP_EFR2, 0x0);
up->ier |= UART_IER_RLSI | UART_IER_RDI;
- serial_out(up, UART_IER, up->ier);
+ serial8250_set_IER(up, up->ier);
}
}
@@ -1717,12 +1727,16 @@ static int omap8250_runtime_resume(struct device *dev)
up = serial8250_get_port(priv->line);
+ spin_lock_irq(&up->port.lock);
+
if (omap8250_lost_context(up))
omap8250_restore_regs(up);
if (up->dma && up->dma->rxchan && !(priv->habit & UART_HAS_EFR2))
omap_8250_rx_dma(up);
+ spin_unlock_irq(&up->port.lock);
+
priv->latency = priv->calc_latency;
schedule_work(&priv->qos_work);
return 0;
diff --git a/drivers/tty/serial/8250/8250_port.c
b/drivers/tty/serial/8250/8250_port.c
index fa43df05342b..f1976d9a8a38 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -744,6 +744,7 @@ static void serial8250_set_sleep(struct uart_8250_port *p,
int sleep)
serial8250_rpm_get(p);
if (p->capabilities & UART_CAP_SLEEP) {
+ spin_lock_irq(&p->port.lock);
if (p->capabilities & UART_CAP_EFR) {
lcr = serial_in(p, UART_LCR);
efr = serial_in(p, UART_EFR);
@@ -751,25 +752,18 @@ static void serial8250_set_sleep(struct uart_8250_port
*p, int sleep)
serial_out(p, UART_EFR, UART_EFR_ECB);
serial_out(p, UART_LCR, 0);
}
- serial_out(p, UART_IER, sleep ? UART_IERX_SLEEP : 0);
+ serial8250_set_IER(p, sleep ? UART_IERX_SLEEP : 0);
if (p->capabilities & UART_CAP_EFR) {
serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B);
serial_out(p, UART_EFR, efr);
serial_out(p, UART_LCR, lcr);
}
+ spin_unlock_irq(&p->port.lock);
}
serial8250_rpm_put(p);
}
-static void serial8250_clear_IER(struct uart_8250_port *up)
-{
- if (up->capabilities & UART_CAP_UUE)
- serial_out(up, UART_IER, UART_IER_UUE);
- else
- serial_out(up, UART_IER, 0);
-}
-
#ifdef CONFIG_SERIAL_8250_RSA
/*
* Attempts to turn on the RSA FIFO. Returns zero on failure.
@@ -1033,8 +1027,10 @@ static int broken_efr(struct uart_8250_port *up)
*/
static void autoconfig_16550a(struct uart_8250_port *up)
{
+ struct uart_port *port = &up->port;
unsigned char status1, status2;
unsigned int iersave;
+ bool is_console;
up->port.type = PORT_16550A;
up->capabilities |= UART_CAP_FIFO;
@@ -1150,6 +1146,11 @@ static void autoconfig_16550a(struct uart_8250_port *up)
return;
}
+ is_console = serial8250_is_console(port);
+
+ if (is_console)
+ serial8250_enter_unsafe(up);
+
/*
* Try writing and reading the UART_IER_UUE bit (b6).
* If it works, this is probably one of the Xscale platform's
@@ -1185,6 +1186,9 @@ static void autoconfig_16550a(struct uart_8250_port *up)
}
serial_out(up, UART_IER, iersave);
+ if (is_console)
+ serial8250_exit_unsafe(up);
+
/*
* We distinguish between 16550A and U6 16550A by counting
* how many bytes are in the FIFO.
@@ -1226,6 +1230,13 @@ static void autoconfig(struct uart_8250_port *up)
up->bugs = 0;
if (!(port->flags & UPF_BUGGY_UART)) {
+ bool is_console;
+
+ is_console = serial8250_is_console(port);
+
+ if (is_console)
+ serial8250_enter_unsafe(up);
+
/*
* Do a simple existence test first; if we fail this,
* there's no point trying anything else.
@@ -1255,6 +1266,10 @@ static void autoconfig(struct uart_8250_port *up)
#endif
scratch3 = serial_in(up, UART_IER) & UART_IER_ALL_INTR;
serial_out(up, UART_IER, scratch);
+
+ if (is_console)
+ serial8250_exit_unsafe(up);
+
if (scratch2 != 0 || scratch3 != UART_IER_ALL_INTR) {
/*
* We failed; there's nothing here
@@ -1376,6 +1391,7 @@ static void autoconfig_irq(struct uart_8250_port *up)
unsigned char save_ICP = 0;
unsigned int ICP = 0;
unsigned long irqs;
+ bool is_console;
int irq;
if (port->flags & UPF_FOURPORT) {
@@ -1385,8 +1401,12 @@ static void autoconfig_irq(struct uart_8250_port *up)
inb_p(ICP);
}
- if (uart_console(port))
+ is_console = serial8250_is_console(port);
+
+ if (is_console) {
console_lock();
+ serial8250_enter_unsafe(up);
+ }
/* forget possible initially masked and pending IRQ */
probe_irq_off(probe_irq_on());
@@ -1418,8 +1438,10 @@ static void autoconfig_irq(struct uart_8250_port *up)
if (port->flags & UPF_FOURPORT)
outb_p(save_ICP, ICP);
- if (uart_console(port))
+ if (is_console) {
+ serial8250_exit_unsafe(up);
console_unlock();
+ }
port->irq = (irq > 0) ? irq : 0;
}
@@ -1432,7 +1454,7 @@ static void serial8250_stop_rx(struct uart_port *port)
up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
up->port.read_status_mask &= ~UART_LSR_DR;
- serial_port_out(port, UART_IER, up->ier);
+ serial8250_set_IER(up, up->ier);
serial8250_rpm_put(up);
}
@@ -1462,7 +1484,7 @@ void serial8250_em485_stop_tx(struct uart_8250_port *p)
serial8250_clear_and_reinit_fifos(p);
p->ier |= UART_IER_RLSI | UART_IER_RDI;
- serial_port_out(&p->port, UART_IER, p->ier);
+ serial8250_set_IER(p, p->ier);
}
}
EXPORT_SYMBOL_GPL(serial8250_em485_stop_tx);
@@ -1709,7 +1731,7 @@ static void serial8250_disable_ms(struct uart_port *port)
mctrl_gpio_disable_ms(up->gpios);
up->ier &= ~UART_IER_MSI;
- serial_port_out(port, UART_IER, up->ier);
+ serial8250_set_IER(up, up->ier);
}
static void serial8250_enable_ms(struct uart_port *port)
@@ -1725,7 +1747,7 @@ static void serial8250_enable_ms(struct uart_port *port)
up->ier |= UART_IER_MSI;
serial8250_rpm_get(up);
- serial_port_out(port, UART_IER, up->ier);
+ serial8250_set_IER(up, up->ier);
serial8250_rpm_put(up);
}
@@ -2160,9 +2182,10 @@ static void serial8250_put_poll_char(struct uart_port
*port,
serial8250_rpm_get(up);
/*
* First save the IER then disable the interrupts
+ *
+ * Best-effort IER access because other CPUs are quiesced.
*/
- ier = serial_port_in(port, UART_IER);
- serial8250_clear_IER(up);
+ __serial8250_clear_IER(up, NULL, &ier);
wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
/*
@@ -2175,7 +2198,7 @@ static void serial8250_put_poll_char(struct uart_port
*port,
* and restore the IER
*/
wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
- serial_port_out(port, UART_IER, ier);
+ __serial8250_set_IER(up, NULL, ier);
serial8250_rpm_put(up);
}
@@ -2186,6 +2209,7 @@ int serial8250_do_startup(struct uart_port *port)
struct uart_8250_port *up = up_to_u8250p(port);
unsigned long flags;
unsigned char iir;
+ bool is_console;
int retval;
u16 lsr;
@@ -2203,21 +2227,25 @@ int serial8250_do_startup(struct uart_port *port)
serial8250_rpm_get(up);
if (port->type == PORT_16C950) {
/* Wake up and initialize UART */
+ spin_lock_irqsave(&port->lock, flags);
up->acr = 0;
serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
serial_port_out(port, UART_EFR, UART_EFR_ECB);
- serial_port_out(port, UART_IER, 0);
+ serial8250_set_IER(up, 0);
serial_port_out(port, UART_LCR, 0);
serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
serial_port_out(port, UART_EFR, UART_EFR_ECB);
serial_port_out(port, UART_LCR, 0);
+ spin_unlock_irqrestore(&port->lock, flags);
}
if (port->type == PORT_DA830) {
/* Reset the port */
- serial_port_out(port, UART_IER, 0);
+ spin_lock_irqsave(&port->lock, flags);
+ serial8250_set_IER(up, 0);
serial_port_out(port, UART_DA830_PWREMU_MGMT, 0);
+ spin_unlock_irqrestore(&port->lock, flags);
mdelay(10);
/* Enable Tx, Rx and free run mode */
@@ -2315,6 +2343,8 @@ int serial8250_do_startup(struct uart_port *port)
if (retval)
goto out;
+ is_console = serial8250_is_console(port);
+
if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) {
unsigned char iir1;
@@ -2331,6 +2361,9 @@ int serial8250_do_startup(struct uart_port *port)
*/
spin_lock_irqsave(&port->lock, flags);
+ if (is_console)
+ serial8250_enter_unsafe(up);
+
wait_for_xmitr(up, UART_LSR_THRE);
serial_port_out_sync(port, UART_IER, UART_IER_THRI);
udelay(1); /* allow THRE to set */
@@ -2341,6 +2374,9 @@ int serial8250_do_startup(struct uart_port *port)
iir = serial_port_in(port, UART_IIR);
serial_port_out(port, UART_IER, 0);
+ if (is_console)
+ serial8250_exit_unsafe(up);
+
spin_unlock_irqrestore(&port->lock, flags);
if (port->irqflags & IRQF_SHARED)
@@ -2395,10 +2431,14 @@ int serial8250_do_startup(struct uart_port *port)
* Do a quick test to see if we receive an interrupt when we enable
* the TX irq.
*/
+ if (is_console)
+ serial8250_enter_unsafe(up);
serial_port_out(port, UART_IER, UART_IER_THRI);
lsr = serial_port_in(port, UART_LSR);
iir = serial_port_in(port, UART_IIR);
serial_port_out(port, UART_IER, 0);
+ if (is_console)
+ serial8250_exit_unsafe(up);
if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
if (!(up->bugs & UART_BUG_TXEN)) {
@@ -2430,7 +2470,7 @@ int serial8250_do_startup(struct uart_port *port)
if (up->dma) {
const char *msg = NULL;
- if (uart_console(port))
+ if (is_console)
msg = "forbid DMA for kernel console";
else if (serial8250_request_dma(up))
msg = "failed to request DMA";
@@ -2481,7 +2521,7 @@ void serial8250_do_shutdown(struct uart_port *port)
*/
spin_lock_irqsave(&port->lock, flags);
up->ier = 0;
- serial_port_out(port, UART_IER, 0);
+ serial8250_set_IER(up, 0);
spin_unlock_irqrestore(&port->lock, flags);
synchronize_irq(port->irq);
@@ -2847,7 +2887,7 @@ serial8250_do_set_termios(struct uart_port *port, struct
ktermios *termios,
if (up->capabilities & UART_CAP_RTOIE)
up->ier |= UART_IER_RTOIE;
- serial_port_out(port, UART_IER, up->ier);
+ serial8250_set_IER(up, up->ier);
if (up->capabilities & UART_CAP_EFR) {
unsigned char efr = 0;
@@ -3312,12 +3352,21 @@ EXPORT_SYMBOL_GPL(serial8250_set_defaults);
#ifdef CONFIG_SERIAL_8250_CONSOLE
-static void serial8250_console_putchar(struct uart_port *port, unsigned char
ch)
+static bool serial8250_console_putchar(struct uart_port *port, unsigned char
ch,
+ struct cons_write_context *wctxt)
{
struct uart_8250_port *up = up_to_u8250p(port);
wait_for_xmitr(up, UART_LSR_THRE);
+ if (!console_can_proceed(wctxt))
+ return false;
serial_port_out(port, UART_TX, ch);
+ if (ch == '\n')
+ up->console_newline_needed = false;
+ else
+ up->console_newline_needed = true;
+
+ return true;
}
/*
@@ -3346,33 +3395,134 @@ static void serial8250_console_restore(struct
uart_8250_port *up)
serial8250_out_MCR(up, up->mcr | UART_MCR_DTR | UART_MCR_RTS);
}
+static bool __serial8250_console_write(struct uart_port *port, struct
cons_write_context *wctxt,
+ const char *s, unsigned int count,
+ bool (*putchar)(struct uart_port *, unsigned char, struct
cons_write_context *))
+{
+ bool finished = false;
+ unsigned int i;
+
+ for (i = 0; i < count; i++, s++) {
+ if (*s == '\n') {
+ if (!putchar(port, '\r', wctxt))
+ goto out;
+ }
+ if (!putchar(port, *s, wctxt))
+ goto out;
+ }
+ finished = true;
+out:
+ return finished;
+}
+
+static bool serial8250_console_write(struct uart_port *port, struct
cons_write_context *wctxt,
+ const char *s, unsigned int count,
+ bool (*putchar)(struct uart_port *, unsigned char, struct
cons_write_context *))
+{
+ return __serial8250_console_write(port, wctxt, s, count, putchar);
+}
+
+static bool atomic_print_line(struct uart_8250_port *up,
+ struct cons_write_context *wctxt)
+{
+ struct uart_port *port = &up->port;
+ char buf[4];
+
+ if (up->console_newline_needed &&
+ !__serial8250_console_write(port, wctxt, "\n", 1,
serial8250_console_putchar)) {
+ return false;
+ }
+
+ sprintf(buf, "A%d", raw_smp_processor_id());
+ if (!__serial8250_console_write(port, wctxt, buf, strlen(buf),
serial8250_console_putchar))
+ return false;
+
+ return __serial8250_console_write(port, wctxt, wctxt->outbuf,
wctxt->len,
+ serial8250_console_putchar);
+}
+
+static void atomic_console_reacquire(struct cons_write_context *wctxt,
+ struct cons_write_context *wctxt_init)
+{
+ memcpy(wctxt, wctxt_init, sizeof(*wctxt));
+ while (!console_try_acquire(wctxt)) {
+ cpu_relax();
+ memcpy(wctxt, wctxt_init, sizeof(*wctxt));
+ }
+}
+
/*
- * Print a string to the serial port using the device FIFO
- *
- * It sends fifosize bytes and then waits for the fifo
- * to get empty.
+ * It should be possible to support a hostile takeover in an unsafe
+ * section if it is write_atomic() that is being taken over. But where
+ * to put this policy?
*/
-static void serial8250_console_fifo_write(struct uart_8250_port *up,
- const char *s, unsigned int count)
+bool serial8250_console_write_atomic(struct uart_8250_port *up,
+ struct cons_write_context *wctxt)
{
- int i;
- const char *end = s + count;
- unsigned int fifosize = up->tx_loadsz;
- bool cr_sent = false;
-
- while (s != end) {
- wait_for_lsr(up, UART_LSR_THRE);
-
- for (i = 0; i < fifosize && s != end; ++i) {
- if (*s == '\n' && !cr_sent) {
- serial_out(up, UART_TX, '\r');
- cr_sent = true;
- } else {
- serial_out(up, UART_TX, *s++);
- cr_sent = false;
- }
+ struct cons_write_context wctxt_init = {};
+ struct cons_context *ctxt_init = &ACCESS_PRIVATE(&wctxt_init, ctxt);
+ struct cons_context *ctxt = &ACCESS_PRIVATE(wctxt, ctxt);
+ bool can_print = true;
+ unsigned int ier;
+
+ /* With write_atomic, another context may hold the port->lock. */
+
+ ctxt_init->console = ctxt->console;
+ ctxt_init->prio = ctxt->prio;
+ ctxt_init->thread = ctxt->thread;
+
+ touch_nmi_watchdog();
+
+ /*
+ * Enter unsafe in order to disable interrupts. If the console is
+ * lost before the interrupts are disabled, bail out because another
+ * context took over the printing. If the console is lost after the
+ * interrutps are disabled, the console must be reacquired in order
+ * to re-enable the interrupts. However in that case no printing is
+ * allowed because another context took over the printing.
+ */
+
+ if (!console_enter_unsafe(wctxt))
+ return false;
+
+ if (!__serial8250_clear_IER(up, wctxt, &ier))
+ return false;
+
+ if (console_exit_unsafe(wctxt)) {
+ can_print = atomic_print_line(up, wctxt);
+ if (!can_print)
+ atomic_console_reacquire(wctxt, &wctxt_init);
+
+ if (can_print) {
+ can_print = console_can_proceed(wctxt);
+ if (can_print)
+ wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
+ else
+ atomic_console_reacquire(wctxt, &wctxt_init);
+ }
+ } else {
+ atomic_console_reacquire(wctxt, &wctxt_init);
+ }
+
+ /*
+ * Enter unsafe in order to enable interrupts. If the console is
+ * lost before the interrupts are enabled, the console must be
+ * reacquired in order to re-enable the interrupts.
+ */
+
+ for (;;) {
+ if (console_enter_unsafe(wctxt) &&
+ __serial8250_set_IER(up, wctxt, ier)) {
+ break;
}
+
+ /* HW-IRQs still disabled. Reacquire to enable them. */
+ atomic_console_reacquire(wctxt, &wctxt_init);
}
+
+ console_exit_unsafe(wctxt);
+
+ return can_print;
}
/*
@@ -3384,64 +3534,54 @@ static void serial8250_console_fifo_write(struct
uart_8250_port *up,
* Doing runtime PM is really a bad idea for the kernel console.
* Thus, we assume the function is called when device is powered up.
*/
-void serial8250_console_write(struct uart_8250_port *up, const char *s,
- unsigned int count)
+bool serial8250_console_write_thread(struct uart_8250_port *up,
+ struct cons_write_context *wctxt)
{
struct uart_8250_em485 *em485 = up->em485;
struct uart_port *port = &up->port;
- unsigned long flags;
- unsigned int ier, use_fifo;
- int locked = 1;
-
- touch_nmi_watchdog();
-
- if (oops_in_progress)
- locked = spin_trylock_irqsave(&port->lock, flags);
- else
- spin_lock_irqsave(&port->lock, flags);
+ unsigned int count = wctxt->len;
+ const char *s = wctxt->outbuf;
+ bool finished = false;
+ unsigned int ier;
+ char buf[4];
/*
* First save the IER then disable the interrupts
*/
- ier = serial_port_in(port, UART_IER);
- serial8250_clear_IER(up);
+ if (!console_enter_unsafe(wctxt) ||
+ !__serial8250_clear_IER(up, wctxt, &ier)) {
+ goto out;
+ }
+ if (!console_exit_unsafe(wctxt))
+ goto out;
/* check scratch reg to see if port powered off during system sleep */
if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) {
+ if (!console_enter_unsafe(wctxt))
+ goto out;
serial8250_console_restore(up);
+ if (!console_exit_unsafe(wctxt))
+ goto out;
up->canary = 0;
}
if (em485) {
- if (em485->tx_stopped)
+ if (em485->tx_stopped) {
+ if (!console_enter_unsafe(wctxt))
+ goto out;
up->rs485_start_tx(up);
- mdelay(port->rs485.delay_rts_before_send);
+ if (!console_exit_unsafe(wctxt))
+ goto out;
+ }
+ mdelay(port->rs485.delay_rts_before_send); /* WTF?! Seriously?!
*/
}
- use_fifo = (up->capabilities & UART_CAP_FIFO) &&
- /*
- * BCM283x requires to check the fifo
- * after each byte.
- */
- !(up->capabilities & UART_CAP_MINI) &&
- /*
- * tx_loadsz contains the transmit fifo size
- */
- up->tx_loadsz > 1 &&
- (up->fcr & UART_FCR_ENABLE_FIFO) &&
- port->state &&
- test_bit(TTY_PORT_INITIALIZED, &port->state->port.iflags) &&
- /*
- * After we put a data in the fifo, the controller will send
- * it regardless of the CTS state. Therefore, only use fifo
- * if we don't use control flow.
- */
- !(up->port.flags & UPF_CONS_FLOW);
+ sprintf(buf, "T%d", raw_smp_processor_id());
+ if (serial8250_console_write(port, wctxt, buf, strlen(buf),
serial8250_console_putchar))
+ finished = serial8250_console_write(port, wctxt, s, count,
serial8250_console_putchar);
- if (likely(use_fifo))
- serial8250_console_fifo_write(up, s, count);
- else
- uart_console_write(port, s, count, serial8250_console_putchar);
+ if (!finished)
+ goto out;
/*
* Finally, wait for transmitter to become empty
@@ -3450,12 +3590,20 @@ void serial8250_console_write(struct uart_8250_port
*up, const char *s,
wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
if (em485) {
- mdelay(port->rs485.delay_rts_after_send);
- if (em485->tx_stopped)
+ mdelay(port->rs485.delay_rts_after_send); /* WTF?! Seriously?!
*/
+ if (em485->tx_stopped) {
+ if (!console_enter_unsafe(wctxt))
+ goto out;
up->rs485_stop_tx(up);
+ if (!console_exit_unsafe(wctxt))
+ goto out;
+ }
}
-
- serial_port_out(port, UART_IER, ier);
+ if (!console_enter_unsafe(wctxt))
+ goto out;
+ WARN_ON_ONCE(!__serial8250_set_IER(up, wctxt, ier));
+ if (!console_exit_unsafe(wctxt))
+ goto out;
/*
* The receive handling will happen properly because the
@@ -3464,11 +3612,15 @@ void serial8250_console_write(struct uart_8250_port
*up, const char *s,
* call it if we have saved something in the saved flags
* while processing with interrupts off.
*/
- if (up->msr_saved_flags)
+ if (up->msr_saved_flags) {
+ if (!console_enter_unsafe(wctxt))
+ goto out;
serial8250_modem_status(up);
-
- if (locked)
- spin_unlock_irqrestore(&port->lock, flags);
+ if (!console_exit_unsafe(wctxt))
+ goto out;
+ }
+out:
+ return finished;
}
static unsigned int probe_baud(struct uart_port *port)
@@ -3488,6 +3640,7 @@ static unsigned int probe_baud(struct uart_port *port)
int serial8250_console_setup(struct uart_port *port, char *options, bool probe)
{
+ struct uart_8250_port *up = up_to_u8250p(port);
int baud = 9600;
int bits = 8;
int parity = 'n';
@@ -3497,6 +3650,8 @@ int serial8250_console_setup(struct uart_port *port, char
*options, bool probe)
if (!port->iobase && !port->membase)
return -ENODEV;
+ up->console_newline_needed = false;
+
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else if (probe)
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 978dc196c29b..22656e8370ea 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -9,6 +9,7 @@ config SERIAL_8250
depends on !S390
select SERIAL_CORE
select SERIAL_MCTRL_GPIO if GPIOLIB
+ select HAVE_ATOMIC_CONSOLE
help
This selects whether you want to include the driver for the standard
serial ports. The standard answer is Y. People who might say N
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 2bd32c8ece39..9901f916dc1a 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2336,8 +2336,11 @@ int uart_suspend_port(struct uart_driver *drv, struct
uart_port *uport)
* able to Re-start_rx later.
*/
if (!console_suspend_enabled && uart_console(uport)) {
- if (uport->ops->start_rx)
+ if (uport->ops->start_rx) {
+ spin_lock_irq(&uport->lock);
uport->ops->stop_rx(uport);
+ spin_unlock_irq(&uport->lock);
+ }
goto unlock;
}
@@ -2430,8 +2433,11 @@ int uart_resume_port(struct uart_driver *drv, struct
uart_port *uport)
if (console_suspend_enabled)
uart_change_pm(state, UART_PM_STATE_ON);
uport->ops->set_termios(uport, &termios, NULL);
- if (!console_suspend_enabled && uport->ops->start_rx)
+ if (!console_suspend_enabled && uport->ops->start_rx) {
+ spin_lock_irq(&uport->lock);
uport->ops->start_rx(uport);
+ spin_unlock_irq(&uport->lock);
+ }
if (console_suspend_enabled)
console_start(uport->cons);
}
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 19376bee9667..9055a22992ed 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -125,6 +125,8 @@ struct uart_8250_port {
#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
unsigned char msr_saved_flags;
+ bool console_newline_needed;
+
struct uart_8250_dma *dma;
const struct uart_8250_ops *ops;
@@ -139,6 +141,9 @@ struct uart_8250_port {
/* Serial port overrun backoff */
struct delayed_work overrun_backoff;
u32 overrun_backoff_time_ms;
+
+ struct cons_write_context wctxt;
+ int cookie;
};
static inline struct uart_8250_port *up_to_u8250p(struct uart_port *up)
@@ -178,8 +183,10 @@ void serial8250_tx_chars(struct uart_8250_port *up);
unsigned int serial8250_modem_status(struct uart_8250_port *up);
void serial8250_init_port(struct uart_8250_port *up);
void serial8250_set_defaults(struct uart_8250_port *up);
-void serial8250_console_write(struct uart_8250_port *up, const char *s,
- unsigned int count);
+bool serial8250_console_write_atomic(struct uart_8250_port *up,
+ struct cons_write_context *wctxt);
+bool serial8250_console_write_thread(struct uart_8250_port *up,
+ struct cons_write_context *wctxt);
int serial8250_console_setup(struct uart_port *port, char *options, bool
probe);
int serial8250_console_exit(struct uart_port *port);
_______________________________________________
Kgdb-bugreport mailing list
Kgdb-bugreport@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/kgdb-bugreport
