On 24 May 2012 07:53, jean-pierre charras <[email protected]> wrote: > Le 21/05/2012 18:50, Brian Sidebotham a écrit : > >> Hi Guys, >> >> Please find a patch to add a bus width option to eeschema attached. >> >> I tidied a bit of code up and removed a dead extern declaration, and >> added the new eeschema dialog option for the bus width. I removed all >> traces of the old BUS_WIDTH_EXPAND. This impacts the GOST build >> option. I think I have honored the GOST build by disabling the bus >> width option and pre-defining it instead as this appears to be part of >> the GOST requirements. Can someone involved with the GOST build >> confirm that what I've done is correct? You should see no change to >> your schematics (so long as your line width is 6mil as per the default >> value). >> >> I had to use a specific version of wxFormBuilder as the latest nightly >> complained, but the one from March was silent - so I used it! I >> limited the minimum values of the line and bus widths to 1 instead of >> 0. I removed the 3mil minimum within the ::GetPenSize functions to >> rely on the limits of the configuration dialog instead. >> >> Best Regards, Brian. > > > Committed, thanks. > > > -- > Jean-Pierre CHARRAS
Thanks for approving and applying the patch Jean-Pierre! :D Best Regards, Brian. _______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : [email protected] Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
