It seems like an important issue, do you know why is it happening exactly or could you trace it?,
I think about it, and it shouldn't happen as you are working in mm (which are multiple of the nm)..... hmmm 2012/6/20 Lorenzo Marcantonio <[email protected]> > I've got these issues when routing a board. Let's say I'm doing > a 0,2/0,2mm routing (i.e. 0,2mm of track separated by 0,2mm of > clearance). Which is huge by today standard (in mil it's about an 8/8) > but the numbers are easy :D Grid is set to 0,05 as for IPC > recommendations (also it's a good general purpose grid). > > Now, the issue is that you *can't* put the tracks at exactly the > specified distance (DRC during track drawing rejects it). In fact, the > 'stick to wall' feature (no better name for it, when you 'push' the track > against another one) gives the following results: > > > Po 0 30.8 15.9 30.8 20.1 0.2 -1 > De 15 0 1 4FE19D7F 0 > Po 0 31.200002 16.05 31.200002 20.100002 0.2 -1 > De 15 0 2 4FE19DC4 0 > > Yes, that's 2 nanometers away :D these 2 nm anyway break the 'grid > beauty' and are unconvenient anyway (you can't route adjacent tracks > without the stick to wall feature). > > What's the plan for this? I suppose I could set the clearance to, say, > 0,199998... I mean, there should be a better solution, IMHO > > -- > Lorenzo Marcantonio > Logos Srl > > _______________________________________________ > Mailing list: https://launchpad.net/~kicad-developers > Post to : [email protected] > Unsubscribe : https://launchpad.net/~kicad-developers > More help : https://help.launchpad.net/ListHelp > -- Miguel Angel Ajo Pelayo http://www.nbee.es +34 636 52 25 69 skype: ajoajoajo
_______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : [email protected] Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
