See attached patch. Should fully support both blind/buried and micro vias. Are you saying you're going to add support for the "insert blind via" and "insert microvia" keys in the interactive router? That would be awesome :D
Also GAL currently doesn't seem to make any visual distinction between standard, micro, and blind vias. Maybe this can be fixed too? On Tue, 2014-07-22 at 20:17 +0200, Tomasz Wlostowski wrote: > On 22.07.2014 20:12, Andrew Zonenberg wrote: > > The current code in the repo would silently convert all vias to standard > > through-hole vias, my code makes it behave properly for blind/buried > > vias. With some additional modifications it could support microvias too > > but I haven't implemented that. > > > > Hi Andrew, > > You could add the type of the via taken from Kicad's model to PNS_VIA > and update syncVia/commitRouting accordingly. I'll do the menus/shortcuts. > > Tom. -- Andrew Zonenberg PhD student, security group Computer Science Department Rensselaer Polytechnic Institute http://colossus.cs.rpi.edu/~azonenberg/
=== modified file 'pcbnew/router/pns_router.cpp'
--- pcbnew/router/pns_router.cpp 2014-07-09 14:57:01 +0000
+++ pcbnew/router/pns_router.cpp 2014-07-22 18:24:03 +0000
@@ -227,12 +227,16 @@
PNS_ITEM* PNS_ROUTER::syncVia( VIA* aVia )
{
+ LAYER_ID top, bottom;
+ aVia->LayerPair(&top, &bottom);
+
PNS_VIA* v = new PNS_VIA(
aVia->GetPosition(),
- PNS_LAYERSET( 0, MAX_CU_LAYERS - 1 ),
+ PNS_LAYERSET( top, bottom),
aVia->GetWidth(),
aVia->GetDrillValue(),
- aVia->GetNetCode() );
+ aVia->GetNetCode(),
+ aVia->GetViaType() );
v->SetParent( aVia );
@@ -759,8 +763,10 @@
via_board->SetWidth( via->Diameter() );
via_board->SetDrill( via->Drill() );
via_board->SetNetCode( via->Net() );
- via_board->SetLayerPair( ToLAYER_ID( m_settings.GetLayerTop() ),
- ToLAYER_ID( m_settings.GetLayerBottom() ) );
+ via_board->SetLayerPair( ToLAYER_ID( via->Layers().Start() ),
+ ToLAYER_ID( via->Layers().End() ) );
+ via_board->SetViaType(via->ViaType());
+
newBI = via_board;
break;
}
=== modified file 'pcbnew/router/pns_via.cpp'
--- pcbnew/router/pns_via.cpp 2014-05-16 11:37:31 +0000
+++ pcbnew/router/pns_via.cpp 2014-07-22 18:26:28 +0000
@@ -91,6 +91,7 @@
v->m_shape = SHAPE_CIRCLE( m_pos, m_diameter / 2 );
v->m_rank = m_rank;
v->m_marker = m_marker;
+ v->m_viaType = m_viaType;
return v;
}
=== modified file 'pcbnew/router/pns_via.h'
--- pcbnew/router/pns_via.h 2014-05-29 11:48:14 +0000
+++ pcbnew/router/pns_via.h 2014-07-22 18:22:04 +0000
@@ -24,6 +24,8 @@
#include <geometry/shape_line_chain.h>
#include <geometry/shape_circle.h>
+#include "../class_track.h"
+
#include "pns_item.h"
class PNS_NODE;
@@ -36,7 +38,7 @@
{}
PNS_VIA( const VECTOR2I& aPos, const PNS_LAYERSET& aLayers,
- int aDiameter, int aDrill, int aNet = -1 ) :
+ int aDiameter, int aDrill, int aNet = -1, VIATYPE_T aViaType = VIA_THROUGH ) :
PNS_ITEM( VIA )
{
SetNet( aNet );
@@ -45,6 +47,7 @@
m_diameter = aDiameter;
m_drill = aDrill;
m_shape = SHAPE_CIRCLE( aPos, aDiameter / 2 );
+ m_viaType = aViaType;
}
@@ -60,6 +63,7 @@
m_rank = aB.m_rank;
m_owner = aB.m_owner;
m_drill = aB.m_drill;
+ m_viaType = aB.m_viaType;
}
const VECTOR2I& Pos() const
@@ -83,6 +87,16 @@
m_diameter = aDiameter;
m_shape.SetRadius( m_diameter / 2 );
}
+
+ VIATYPE_T ViaType() const
+ {
+ return m_viaType;
+ }
+
+ void SetViaType(VIATYPE_T aViaType)
+ {
+ m_viaType = aViaType;
+ }
int Drill() const
{
@@ -124,6 +138,7 @@
int m_drill;
VECTOR2I m_pos;
SHAPE_CIRCLE m_shape;
+ VIATYPE_T m_viaType;
};
#endif
signature.asc
Description: This is a digitally signed message part
_______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : [email protected] Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
