What's the best arch I should pass for compatibility reasons--I can do this across the board for the brew dependencies.
Adam Wolf On Mon, Feb 23, 2015 at 10:04 AM, Garth Corral <[email protected]> wrote: > The issue here isn’t with pixman, per se, it is down to the fact that it > is being configured and built on one machine with support for some newer > vector instructions, and run on another who’s cpu does not support those > instructions. So long as it’s built and run on the same machine you would > not see this. > > In this case there appears at the crash location in > _pixman_setup_combiner_functions_32 of libpixman.dylib: > > 000000000001092a vmovq %r8, %xmm0 > 000000000001092f vpunpcklqdq %xmm0, %xmm0, %xmm0 ## xmm0 = xmm0[0,0] > > These are AVX (&AVX2) instructions, which aren't supported in your Core 2 > CPU. > > I don’t use brew so I can’t say for sure, but I’m guessing that it's > passing -march=native (or more specific) to the compiler, which because the > Core i5 of the build machine supports AVX, is including those instructions. > > > Garth > > > On Feb 23, 2015, at 5:21 AM, Johannes Maibaum <[email protected]> > wrote: > > > > Hi, > > > > my own build of r5447 just finished and pcbnew does *not* crash. > > I decided to change my build flags to match Adam's more closely, e.g. > building without > > Scripting, here is what the version information *from my own build* > gives now: > > > > Application: kicad > > Version: (2015-02-22 BZR 5447)-product Release build > > wxWidgets: Version 3.0.2 (debug,UTF-8,compiler with C++ ABI 1002,GCC > 4.2.1,STL containers,compatible with 2.8) > > Platform: Mac OS X (Darwin 14.1.0 x86_64), 64 bit, Little endian, wxMac > > Boost version: 1.57.0 > > USE_WX_GRAPHICS_CONTEXT=OFF > > USE_WX_OVERLAY=ON > > KICAD_SCRIPTING=OFF > > KICAD_SCRIPTING_MODULES=OFF > > KICAD_SCRIPTING_WXPYTHON=OFF > > USE_FP_LIB_TABLE=HARD_CODED_ON > > BUILD_GITHUB_PLUGIN=ON > > KICAD_USE_WEBKIT=OFF > > > > So, the only differences between my setup and the nightly should be, for > now: > > > > - Boost being 1.57.0 here instead of 1.54.0 > > - cairo built --without-x11 instead of with X11 support. > > > > I think that pixmap should be technically the same on my machine and on > Adam's build server, > > as they both got installed precompiled from Homebrew. > > > > But, what came to my mind just now: I built with > CMAKE_OSX_DEPLOYMENT_TARGET set to 10.9 > > (wxWidgets being built with the 10.9 option from the osx_build_wx script > as well), so > > it should be linked to the newer C++ libraries from Apple, right? Could > this be another > > hint? I expect Adam to build for a lower OSX Version, like 10.7 or so, > right? > > > > > > Best, > > > > Johannes > > > >> Am 23.02.2015 um 13:54 schrieb Bernhard Stegmaier < > [email protected]>: > >> > >> Hi, > >> > >> I don't know if it helps... I am building pixman with MacPorts, and I > used to have it compiled with X11, but I recently switched to use the > --without-x11. > >> For me both work, I don't see what the difference is (apart from less > X11-libraries needed in the bundle when compiling with --without-x11). > >> > >> SSE-wise Core2Duo and i5 should be the same. > >> But maybe pixman builds with some specific i5 -march/-mcpu settings > that don't work on Core2Duo? > >> But, obviously Adam pulled in a prebuilt binary for this nightly that > also doesn't work for you. > >> As far as I know homebrew bottled packages should have generic CFLAGS, > so this should have worked then (if the binary really was bottled with > generic CFLAGS). > >> > >> > >> Regards, > >> Bernhard > >> > >> On 2015-02-23 12:40, Johannes Maibaum wrote: > >>> Hello Adam, Garth, and Bernhard, > >>> first, the build of last night (r5447) still crashes on my system with > >>> the same report pointing towards libpixman. > >>> My system is an older Mac Book Pro (middle 2010) with the following > base specs: > >>> Modellname: MacBook Pro > >>> Modell-Identifizierung: MacBookPro7,1 > >>> Prozessortyp: Intel Core 2 Duo > >>> Prozessorgeschwindigkeit: 2,4 GHz > >>> Anzahl der Prozessoren: 1 > >>> Gesamtanzahl der Kerne: 2 > >>> L2-Cache: 3 MB > >>> With libpixman obviously being the source of trouble, I looked for > >>> differences between my own working build system and Adam's nightlies: > >>> On my machine, pixman comes as a dependency for cairo, which I also > >>> installed via Homebrew, but built with the option --without-x11. > >>> pixman itself was installed "bottled", e.g. as a precompiled binary. > >>> Seeing that I am obviously the only one having troubles like this with > >>> the nightlies, I will build the current Kicad source tree myself again > >>> this afternoon, and see if pcbnew will then crash again or not. > >>> Best, > >>> Johannes > >>>> Am 23.02.2015 um 01:41 schrieb Adam Wolf < > [email protected]>: > >>>> So when I reinstalled it, it installed a binary version without > downloading, which means that's very likely what was installed on there > before. I forced it to reinstall from source--but that is probably going to > be different than the binary version. > >>>> I will send the build log for pixman over when it is finished, but we > will need the affected users to test out tonight's nightlies to make sure > they're still affected. > >>>> Adam Wolf > >>>> On Sun, Feb 22, 2015 at 6:36 PM, Garth Corral <[email protected]> > wrote: > >>>> Yeah, not shipped with OS X. It would be something that was built. > Presuming that the new build configured exactly like the old build it would > be interesting to see. > >>>> Garth > >>>>> On Feb 22, 2015, at 3:48 PM, Adam Wolf < > [email protected]> wrote: > >>>>> Interesting. Is this something that comes with OS X? If not, I > installed it with brew. I can uninstall it and reinstall it, and capture > that log. > >>>>> Let me know. > >>>>> Adam Wolf > >>>>> On Feb 22, 2015 5:47 PM, "Garth Corral" <[email protected]> wrote: > >>>>> More interesting would be the build log for pixman which, according > to the attached log, is coming from /usr/local/lib. > >>>>> Garth > >>>>>> On Feb 22, 2015, at 3:31 PM, Adam Wolf < > [email protected]> wrote: > >>>>>> The builds are being done on a Mac Mini. > >>>>>> Model Name: Mac mini > >>>>>> Model Identifier: Macmini6,1 > >>>>>> Processor Name: Intel Core i5 > >>>>>> Processor Speed: 2.5 GHz > >>>>>> Number of Processors: 1 > >>>>>> Total Number of Cores: 2 > >>>>>> L2 Cache (per Core): 256 KB > >>>>>> L3 Cache: 3 MB > >>>>>> Memory: 16 GB > >>>>>> The official Mac name for it is "Mac Mini (late 2012)". > >>>>>> Attached is the full build log from Jenkins. Note, I cleanly > rebuild *everything* every time, including wx and boost and everything, so > the log is quite long. > >>>>>> Adam Wolf > >>>>>> Cofounder and Engineer > >>>>>> W&L > >>>>>> On Sun, Feb 22, 2015 at 4:13 PM, Bernhard Stegmaier < > [email protected]> wrote: > >>>>>> Sounds reasonable… from a quick look into the source pixman seems > to check for MMX/SSE2/SSE3 and some non-x86 things during configure. > >>>>>> Maybe the same problem here: > >>>>>> https://bugs.launchpad.net/kicad/+bug/1424406 > >>>>>> @Adam: > >>>>>> What is your build machine/cluster? > >>>>>> Regards, > >>>>>> Bernhard > >>>>>>> On 22 Feb 2015, at 21:12, Garth Corral <[email protected]> wrote: > >>>>>>> I can only speculate, but by the looks of that stack, I’m going to > guess that somewhere in the pixman rendering code there is conditionally > compiled instruction extensions, such as SSE*, that your cpu does not > support. The nightly builds probably compile this in based on some > configuration test, and your builds do not. > >>>>>>> What is the cpu type and age of your system? > >>>>>>> Garth > >>>>>>>> On Feb 22, 2015, at 11:14 AM, Bernhard Stegmaier < > [email protected]> wrote: > >>>>>>>> Hi, > >>>>>>>> OK, didn’t get that. > >>>>>>>> From my side there is really not much more to help. > >>>>>>>> The only thing that I could imagine is if Wayne could do a > Debug-Build for you and then you could check if you still get that crash > and if there is some other information we could get from that. > >>>>>>>> The bundle is self contained, so apart from the system libraries > (which should be the same on each 10.10.2) there is in theory nothing on > your machine that should break it. > >>>>>>>> What machine is it? > >>>>>>>> Something special about it that could cause pixman to crash on > start? > >>>>>>>> Did you have any special pixman version/configuration with your > build? > >>>>>>>> Regards, > >>>>>>>> Bernhard > >>>>>>>>> On 22.02.2015, at 20:06, Johannes Maibaum <[email protected]> > wrote: > >>>>>>>>> Hi Bernard, > >>>>>>>>> sorry, I wasn't clear enough, I think. The version information I > provided with my last email was *not* from the nightlies. It was from a > working built on my machine, e.g. a build that does *not* crash. > >>>>>>>>> I thought to provide this information a starting point for > further analysis of the crash with the nightly which is of course built > with Boost 1.54, and from r5441. > >>>>>>>>> Best, > >>>>>>>>> Johannes > >>>>>>>>>> Am 22.02.2015 um 19:22 schrieb Bernhard Stegmaier < > [email protected]>: > >>>>>>>>>> … I also was too fast with my response, adding list again… > >>>>>>>>>>> On 22.02.2015, at 19:21, Bernhard Stegmaier < > [email protected]> wrote: > >>>>>>>>>>> Hi Johannes, > >>>>>>>>>>> it is lib-pixmap what seems to be crashing, but that is weird. > >>>>>>>>>>> I found some similar reports of crashes with > Mozilla/Firefox/etc., but none of them with a root-cause or more > information. > >>>>>>>>>>> However, something *is* wrong: > >>>>>>>>>>>> Boost version: 1.57.0 > >>>>>>>>>>> Adam’s build doesn’t use 1.57, but 1.54 currently being built > with KiCad… > >>>>>>>>>>> And also the build version is not what Adam built: > >>>>>>>>>>>> Version: (2015-02-06 BZR 5410)-product Release build > >>>>>>>>>>> So, whatever you are running, it doesn’t seem to be the > downloaded nightly? > >>>>>>>>>>> Regards, > >>>>>>>>>>> Bernhard > >>>>>>>>>>>> On 22.02.2015, at 19:20, Johannes Maibaum <[email protected]> > wrote: > >>>>>>>>>>>> Hi Bernhard, > >>>>>>>>>>>> the crash happens both when starting pcbnew standalone, and > when starting pcbnew or the footprint editor from the main Kicad app. > Unfortunately, I don't have another Mac to cross check. On my 10.10.2 > machine, it crashes every time. > >>>>>>>>>>>> I did however check my latest own build again, which has no > problems with either pcbnew or the footprint editor. It was built two weeks > ago, from r5410, and with python scripting enabled. I don't know if this > does help you, but here is the version information string for this working > build: > >>>>>>>>>>>> Application: kicad > >>>>>>>>>>>> Version: (2015-02-06 BZR 5410)-product Release build > >>>>>>>>>>>> wxWidgets: Version 3.0.2 (debug,UTF-8,compiler with C++ ABI > 1002,GCC 4.2.1,STL containers,compatible with 2.8) > >>>>>>>>>>>> Platform: Mac OS X (Darwin 14.1.0 x86_64), 64 bit, Little > endian, wxMac > >>>>>>>>>>>> Boost version: 1.57.0 > >>>>>>>>>>>> USE_WX_GRAPHICS_CONTEXT=OFF > >>>>>>>>>>>> USE_WX_OVERLAY=ON > >>>>>>>>>>>> KICAD_SCRIPTING=ON > >>>>>>>>>>>> KICAD_SCRIPTING_MODULES=ON > >>>>>>>>>>>> KICAD_SCRIPTING_WXPYTHON=ON > >>>>>>>>>>>> USE_FP_LIB_TABLE=HARD_CODED_ON > >>>>>>>>>>>> BUILD_GITHUB_PLUGIN=ON > >>>>>>>>>>>> KICAD_USE_WEBKIT=OFF > >>>>>>>>>>>> Best, > >>>>>>>>>>>> Johannes > >>>>>>>>>>>>> Am 22.02.2015 um 18:12 schrieb Bernhard Stegmaier < > [email protected]>: > >>>>>>>>>>>>> Hi, > >>>>>>>>>>>>> does it crash only for standalone pcbnew, or also for that > being launched via KiCad launcher, or both? > >>>>>>>>>>>>> I justed checked on both my 10.10.1 and 10.10.2 machines and > don’t have any problems. > >>>>>>>>>>>>> The only thing I just noticed is that pcbnew can’t load a > file via KiCad launcher if started from a path with a space in it (e.g., > /Volumes/My Disk/KiCad…) … but yours seems to be completely another story. > >>>>>>>>>>>>> Regards > >>>>>>>>>>>>> Bernhard > >>>>>>>>>>>>>> On 22 Feb 2015, at 14:05, Johannes Maibaum < > [email protected]> wrote: > >>>>>>>>>>>>>> Hi Adam, > >>>>>>>>>>>>>> first, I'd like to thank you, Wayne and Layne, and of > course all the other OSX devs for finally bringing "official" OSX builds > back to the Kicad main page, great work! This is an amazing improvement for > all OSX folks. > >>>>>>>>>>>>>> But, testing the latest of the nightly builds, PCBNew and > the Footprint editor both crash on startup on my machine (crash log for > PCBNew is attached). All other apps work fine. > >>>>>>>>>>>>>> Before installing the nightly, I uninstalled my own build > of Kicad, and I am pretty sure to having wiped every Kicad file relating to > my build (including all the library folders). But perhaps I have missed > something. > >>>>>>>>>>>>>> I can provide you with more information if you tell me what > to do. > >>>>>>>>>>>>>> Cheers, > >>>>>>>>>>>>>> Johannes > >>>>>>>>>>>>>> <PCBNew-crashlog-OSX-nightly-Feb-22.txt> > >>>>>>>>>>>>>>> Am 21.02.2015 um 18:29 schrieb Adam Wolf < > [email protected]>: > >>>>>>>>>>>>>>> Hi folks, > >>>>>>>>>>>>>>> You can find the latest OS X nightlies at > http://downloads.kicad-pcb.org/osx/, and Nick linked it from > http://downloads.kicad-pcb.org/osx/. > >>>>>>>>>>>>>>> There's plenty of work still left to do for me on Kicad, > but I am excited to cross this one off the list. > >>>>>>>>>>>>>>> I'll be idling on the IRC channel more actively to help > support users with this. > >>>>>>>>>>>>>>> I'll be announcing on the Kicad user list shortly. > >>>>>>>>>>>>>>> Thanks everyone! Even though this was a lot of work from > us at Wayne and Layne, what we did was only a drop in the bucket compared > to what has already been done by the dev team and the OS X devs! > >>>>>>>>>>>>>>> Adam Wolf > >>>>>>>>>>>>>>> Cofounder and Engineer > >>>>>>>>>>>>>>> W&L > >>>>>>>>>>>>>>> _______________________________________________ > >>>>>>>>>>>>>>> Mailing list: https://launchpad.net/~kicad-developers > >>>>>>>>>>>>>>> Post to : [email protected] > >>>>>>>>>>>>>>> Unsubscribe : https://launchpad.net/~kicad-developers > >>>>>>>>>>>>>>> More help : https://help.launchpad.net/ListHelp > >>>>>>>>>>>>>> _______________________________________________ > >>>>>>>>>>>>>> Mailing list: https://launchpad.net/~kicad-developers > >>>>>>>>>>>>>> Post to : [email protected] > >>>>>>>>>>>>>> Unsubscribe : https://launchpad.net/~kicad-developers > >>>>>>>>>>>>>> More help : https://help.launchpad.net/ListHelp > >>>>>>>> _______________________________________________ > >>>>>>>> Mailing list: https://launchpad.net/~kicad-developers > >>>>>>>> Post to : [email protected] > >>>>>>>> Unsubscribe : https://launchpad.net/~kicad-developers > >>>>>>>> More help : https://help.launchpad.net/ListHelp > >>>>>> _______________________________________________ > >>>>>> Mailing list: https://launchpad.net/~kicad-developers > >>>>>> Post to : [email protected] > >>>>>> Unsubscribe : https://launchpad.net/~kicad-developers > >>>>>> More help : https://help.launchpad.net/ListHelp > >>>>>> <consoleText.txt.zip>_______________________________________________ > >>>>>> Mailing list: https://launchpad.net/~kicad-developers > >>>>>> Post to : [email protected] > >>>>>> Unsubscribe : https://launchpad.net/~kicad-developers > >>>>>> More help : https://help.launchpad.net/ListHelp > >>>>> _______________________________________________ > >>>>> Mailing list: https://launchpad.net/~kicad-developers > >>>>> Post to : [email protected] > >>>>> Unsubscribe : https://launchpad.net/~kicad-developers > >>>>> More help : https://help.launchpad.net/ListHelp > >>>> _______________________________________________ > >>>> Mailing list: https://launchpad.net/~kicad-developers > >>>> Post to : [email protected] > >>>> Unsubscribe : https://launchpad.net/~kicad-developers > >>>> More help : https://help.launchpad.net/ListHelp > >>> _______________________________________________ > >>> Mailing list: https://launchpad.net/~kicad-developers > >>> Post to : [email protected] > >>> Unsubscribe : https://launchpad.net/~kicad-developers > >>> More help : https://help.launchpad.net/ListHelp > >> > >> _______________________________________________ > >> Mailing list: https://launchpad.net/~kicad-developers > >> Post to : [email protected] > >> Unsubscribe : https://launchpad.net/~kicad-developers > >> More help : https://help.launchpad.net/ListHelp > > > > _______________________________________________ > > Mailing list: https://launchpad.net/~kicad-developers > > Post to : [email protected] > > Unsubscribe : https://launchpad.net/~kicad-developers > > More help : https://help.launchpad.net/ListHelp > > > _______________________________________________ > Mailing list: https://launchpad.net/~kicad-developers > Post to : [email protected] > Unsubscribe : https://launchpad.net/~kicad-developers > More help : https://help.launchpad.net/ListHelp > >
_______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : [email protected] Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
