On 8/25/2015 2:11 PM, jp charras wrote: > Le 25/08/2015 17:48, Wayne Stambaugh a écrit : >> Is anyone else have an issue with the track width and via diameter combo >> boxes in the auxiliary tool bar not being populated with the board >> design rules information? I just noticed this because I added some >> dummy design rules so I could change the width of some of my ground >> traces and noticed that only the default track width and via diameters >> are available. It looks like the design rule settings are being >> ignored. I tried closing and reopening Pcbnew, restarting KiCad >> completely, and running Pcbnew in stand alone mode but no luck. I seem >> to remember this issue being fixed several times in the past. I was >> just wondering if it's a problem on windows or a problem in general. >> >> Wayne >> > > Tested on W7 -32 bits pro, I have no problem. > > Auxiliary tool is populated, both when loading a board and modifying > track widths and via diameters. > > Never mind. Apparently the behavior of these comboboxes changed somewhere along the line. I just looked at the code and all they do now is show the current net class settings when you are routing a trace. You used to be able to select from a list of widths and apply width to any trace by right clicking and selecting change track width but that is not the case any more. Sorry about the noise.
Wayne _______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : [email protected] Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
