Hi, Putting back that my via stitching tool to routing tool. It is better that way, I think. All via tools are in same place, and it adds vias to pours only from hotkeys.
On Sun, Oct 2, 2016 at 12:28 PM, Heikki Pulkkinen <[email protected]> wrote: > Hi, > > Finally Via Stitching without tracks is at zone tool. I tested it little > bit, but more tests are needed. This patch replace all other patches. Do > not use them, use only this patch. I think this is worth of try. I am going > to use it anyway, even if it do not get any acceptance. First patch is for > Fedora users. It makes possible to build Kicad in Fedora release wxWidgets > libs whitout building wxWidget from source. I do not know has anybody else > that problem, but I had. > > > Heikki > > On Tue, Sep 27, 2016 at 6:46 PM, Heikki Pulkkinen <[email protected]> > wrote: > >> Hi >> >> And I really practice. I made improvement and forgot to copy all. So >> improvement is in these two patches. I hope this suggestion is accepted as >> a new feature. >> >> Heikki >> >> On Tue, Sep 27, 2016 at 2:31 PM, Heikki Pulkkinen <[email protected]> >> wrote: >> >>> Hi, >>> >>> As in practice, I made a patch file of my changes Not only diifs. It is >>> SHIFT-ALT-V hotkey whitch make buried and blind vias, as it is in routing >>> too. >>> >>> >>> Heikki >>> >>> On Sun, Sep 25, 2016 at 2:25 PM, Heikki Pulkkinen <[email protected]> >>> wrote: >>> >>>> Hi, >>>> >>>> I made some improvements to my patch of via stitching. Now you can just >>>> point copper pour place and press V, it make trough via. If you press >>>> SHIFT+CTRL+V it make buried or blind via.It does not change working layer. >>>> Only when you place buried or blind via from different layer than it's >>>> layer pair is. I think that it is quite easy to shoot board full of copper >>>> pours connecting vias. It is possible to remove connecting tracks from old >>>> designs. Just delete connection from pad and use clenup. Only have to >>>> remember that if there are not at least two copper pours in same netcode in >>>> different layers via is deleted too. Any support? >>>> >>>> >>>> Heikki >>>> >>>> On Sat, Sep 24, 2016 at 3:06 PM, Heikki Pulkkinen <[email protected]> >>>> wrote: >>>> >>>>> Hi everybody, >>>>> >>>>> This is my suggestion to via stitching without any tracks. It connects >>>>> unconnected vias in different copper pours witch has same netcode. Adding >>>>> vias is normal routing process without routing tracks. Start - Change >>>>> Layer >>>>> - End. Tool that do those things automatically would be good, so you can >>>>> add all vias in same layer. After adding vias, run "Fill or Refill All >>>>> Zones" that "Clenup tracks and vias" do not remove partly connected vias. >>>>> >>>>> >>>>> Heikki >>>>> >>>> >>>> >>> >> >
From 69095a9276f557be290b1028f886c6d659b8d23b Mon Sep 17 00:00:00 2001 From: heikki <[email protected]> Date: Tue, 4 Oct 2016 11:41:29 +0300 Subject: [PATCH 4/6] Via Stitching back to route tool MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="------------2.7.4" This is a multi-part message in MIME format. --------------2.7.4 Content-Type: text/plain; charset=UTF-8; format=fixed Content-Transfer-Encoding: 8bit --- pcbnew/hotkeys_board_editor.cpp | 2 +- pcbnew/onrightclick.cpp | 12 ------------ 2 files changed, 1 insertion(+), 13 deletions(-) --------------2.7.4 Content-Type: text/x-patch; name="0004-Via-Stitching-back-to-route-tool.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-Via-Stitching-back-to-route-tool.patch" diff --git a/pcbnew/hotkeys_board_editor.cpp b/pcbnew/hotkeys_board_editor.cpp index 1f152b9..965ffdf 100644 --- a/pcbnew/hotkeys_board_editor.cpp +++ b/pcbnew/hotkeys_board_editor.cpp @@ -373,7 +373,7 @@ bool PCB_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotkeyCode, const wxPoint& aPosit if( !itemCurrentlyEdited ) // no track in progress: switch layer only { //Add via with stitching - if( GetToolId() == ID_PCB_ZONES_BUTT ) + if( GetToolId() == ID_TRACK_BUTT ) { evt_type = hk_id == HK_ADD_BLIND_BURIED_VIA ? ID_POPUP_PCB_PLACE_ZONE_BLIND_BURIED_VIA : ID_POPUP_PCB_PLACE_ZONE_THROUGH_VIA; diff --git a/pcbnew/onrightclick.cpp b/pcbnew/onrightclick.cpp index d3d6b90..f5ed5d0 100644 --- a/pcbnew/onrightclick.cpp +++ b/pcbnew/onrightclick.cpp @@ -367,18 +367,6 @@ bool PCB_EDIT_FRAME::OnRightClick( const wxPoint& aMousePos, wxMenu* aPopMenu ) g_Board_Editor_Hokeys_Descr, HK_ZONE_REMOVE_FILLED ); AddMenuItem( aPopMenu, ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES, msg, KiBitmap( zone_unfill_xpm ) ); - - msg = AddHotkeyName( _( "Place Through Stitch Via" ), g_Board_Editor_Hokeys_Descr, - HK_ADD_THROUGH_VIA ); - AddMenuItem( aPopMenu, ID_POPUP_PCB_PLACE_ZONE_THROUGH_VIA, msg, KiBitmap( via_xpm ) ); - if( GetDesignSettings().m_BlindBuriedViaAllowed ) - { - msg = AddHotkeyName( _( "Place Blind/Buried Stitch Via" ), - g_Board_Editor_Hokeys_Descr, HK_ADD_BLIND_BURIED_VIA ); - AddMenuItem( aPopMenu, ID_POPUP_PCB_PLACE_ZONE_BLIND_BURIED_VIA, - msg, KiBitmap( via_buried_xpm ) ); - } - aPopMenu->AppendSeparator(); } --------------2.7.4--
_______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : [email protected] Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
