Le 22/08/2017 à 05:55, hauptmech a écrit : > > Manufacturing techniques vary between manufacturers and continuously evolve. > Why would kicad limit > itself to what eurocircuits can do? They have optimized their process for > quick turn prototyping and > while they document their process nicely, they are probably not a good > reference for what can be done. > > On 21/08/17 05:44, jp charras wrote: >> Before working on blind and buried vias dialog, please have a look at: >> https://www.eurocircuits.com/blog/Blind-and-buried-vias >
Currently there is no control in Kicad. Sure, but it looks like there are some constraints on blind/buried vias (microvias are blind/buried vias) depending on board houses. So it could be worth to be able to control these constraints inside Kicad (at least to have a minimal control). We currently have a DRC which detects too small clearances and track widths: this is most of time due to manufacturing constraints which continuously evolve. -- Jean-Pierre CHARRAS _______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : [email protected] Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
