Nick was having an unknown issue but I haven't heard back from him on whether the issue was resolved by doing a clean cmake. If it isn't then I'll need to address that.
Nick did you have a chance to test that? -S 2018-02-10 6:18 GMT-08:00 Wayne Stambaugh <stambau...@gmail.com>: > Seth, > > What is the current status of this patch? I would like to get it merged > before rc1 so the package devs can test it. > > Cheers, > > Wayne > > On 01/30/2018 02:12 PM, Seth Hillbrand wrote: > > Nick- > > > > Thanks for the test. I'm attaching revised patch that allows multiple > > OpenCASCADE installations on a single machine. > > > > I've tested with a few different OpenCASCADE versions down to 6.8 with > > no issues installed alongside OCE 0.17. You can choose which you want > > to link by using either "-DKICAD_USE_OCE" or "-DKICAD_USE_OCC". If both > > are specified, "-DKICAD_USE_OCC" will override. > > > > I corrected the cmake message display to be less doubled and correctly > > show the library location. > > > > I've also added the OCC version and type to the about window version > info. > > > > The "Based on" line was taken from > > (https://github.com/FreeCAD/FreeCAD/blob/master/src/FCConfig.h) when > > trying to determine how FreeCAD likes to refer to themselves. The > > actual FindOpenCascade.cmake file did not have a copyright header > > attached but falls under the license from > > (https://github.com/FreeCAD/FreeCAD/blob/master/COPYING). I note that I > > had it written as "FreeCAD CADx development system". I've corrected > > this to read "FreeCAD CAx development system". > > > > I'm not sure to what the "CheckSymbolExists" line is referring. I don't > > see it on my machine. > > > > -Seth > > > > 2018-01-29 14:30 GMT-08:00 Nick Østergaard <oe.n...@gmail.com > > <mailto:oe.n...@gmail.com>>: > > > > Hi Seth, > > > > I just took the patch for a testrun and will state some comments > below. > > > > This looks a bit strange: > > > > -- Boost version: 1.66.0 > > -- -- OpenCASCADE Community Edition has been found. > > -- -- Found OCE/OpenCASCADE version: 6.8.0 > > -- -- OCE/OpenCASCADE include directory: > > /opt/oce/lib/oce-0.17/../../include/oce > > -- -- OCE/OpenCASCADE shared libraries directory: > > -- Check for installed Python Interpreter -- found > > > > The messages are with double -- and the shared libs. > > > > But an improvement with your patch over what is currently in kicad > > is that it found OCE on my system without explicitly specifind > > OCE_DIR. But how do I make it use OCCT when I also have OCE > installed? > > > > What does CADx mean in that header? > > > > What is this about? > > -- Looking for > > /home/amazingdude/kicad-source-mirror/build_seths_ > occt_patch_occt/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx > > -- Looking for > > /home/amazingdude/kicad-source-mirror/build_seths_ > occt_patch_occt/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx > > - not found > > > > I tried to test it with removing oce and just have occt installed > > and got something like this: > > -- Found OCC: /opt/opencascade/inc (found version "6.9.1") > > -- -- Found OCE/OpenCASCADE version: 6.9.1 > > -- -- OCE/OpenCASCADE include directory: /opt/opencascade/inc > > -- -- OCE/OpenCASCADE shared libraries directory: > /opt/opencascade/lib > > > > It did not build against community/opencascade 6.9.1-7. I got the > > following error in a clean build dir. > > > > $ make kicad2step -j1 > > [ 0%] Linking CXX executable kicad2step > > /usr/bin/ld: cannot find -lTKMesh > > /usr/bin/ld: cannot find -lTKernel > > /usr/bin/ld: cannot find -lTKG2d > > /usr/bin/ld: cannot find -lTKG3d > > /usr/bin/ld: cannot find -lTKMath > > /usr/bin/ld: cannot find -lTKIGES > > /usr/bin/ld: cannot find -lTKSTL > > /usr/bin/ld: cannot find -lTKXSBase > > /usr/bin/ld: cannot find -lTKBin > > /usr/bin/ld: cannot find -lTKBO > > /usr/bin/ld: cannot find -lTKCDF > > /usr/bin/ld: cannot find -lTKBRep > > /usr/bin/ld: cannot find -lTKTopAlgo > > /usr/bin/ld: cannot find -lTKGeomAlgo > > /usr/bin/ld: cannot find -lTKGeomBase > > /usr/bin/ld: cannot find -lTKPrim > > /usr/bin/ld: cannot find -lTKSTEP > > /usr/bin/ld: cannot find -lTKSTEPBase > > /usr/bin/ld: cannot find -lTKSTEPAttr > > /usr/bin/ld: cannot find -lTKFeat > > /usr/bin/ld: cannot find -lTKCAF > > /usr/bin/ld: cannot find -lTKXCAF > > /usr/bin/ld: cannot find -lTKLCAF > > /usr/bin/ld: cannot find -lTKXDESTEP > > /usr/bin/ld: cannot find -lTKXDEIGES > > collect2: error: ld returned 1 exit status > > make[3]: *** > > [utils/kicad2step/CMakeFiles/kicad2step.dir/build.make:355: > > utils/kicad2step/kicad2step] Error 1 > > make[2]: *** [CMakeFiles/Makefile2:3007: > > utils/kicad2step/CMakeFiles/kicad2step.dir/all] Error 2 > > make[1]: *** [CMakeFiles/Makefile2:3019: > > utils/kicad2step/CMakeFiles/kicad2step.dir/rule] Error 2 > > make: *** [Makefile:979: kicad2step] Error 2 > > > > But those libs do existm, searched for the last one; > > $ yaourt -Ql opencascade | grep TKXDEIGES > > opencascade /opt/opencascade/lib/libTKXDEIGES.so > > opencascade /opt/opencascade/lib/libTKXDEIGES.so.0 > > opencascade /opt/opencascade/lib/libTKXDEIGES.so.0.0.0 > > > > I got these variables set in the CMakeCache > > > > cat CMakeCache.txt | grep "OCE\|OCC" > > KICAD_USE_OCE:BOOL=ON > > OCC_INCLUDE_DIR:PATH=/opt/opencascade/inc > > OCC_LIBRARY:FILEPATH=/opt/opencascade/lib/libTKernel.so > > //The directory containing a CMake configuration file for OCE. > > OCE_DIR:PATH=OCE_DIR-NOTFOUND > > //Details about finding OCC > > FIND_PACKAGE_MESSAGE_DETAILS_OCC:INTERNAL=[/opt/ > opencascade/inc][v6.9.1()] > > > > This is tested on archlinux. > > > > 2018-01-29 19:54 GMT+01:00 Seth Hillbrand <seth.hillbr...@gmail.com > > <mailto:seth.hillbr...@gmail.com>>: > > > > Hi All- > > > > Currently, the build requires the opencascade community > > edition. For various reasons, I need to have the current > > non-community edition of OpenCASCADE installed on my work > machine. > > > > The attached patch allows compiling KiCad with either the > > OpenCASCADE community edition or standard edition. > > > > I've tested on a homebrew-based Mac install as well as Linux but > > haven't verified MSW, if someone would be willing to test it > > there, that would be great! The basic search routines are > > lightly modified from FreeCAD's logic and keep their LGPL > > copyright on the CMake file. > > > > -Seth > > > > > > _______________________________________________ > > Mailing list: https://launchpad.net/~kicad-developers > > <https://launchpad.net/~kicad-developers> > > Post to : kicad-developers@lists.launchpad.net > > <mailto:kicad-developers@lists.launchpad.net> > > Unsubscribe : https://launchpad.net/~kicad-developers > > <https://launchpad.net/~kicad-developers> > > More help : https://help.launchpad.net/ListHelp > > <https://help.launchpad.net/ListHelp> > > > > > > > > > > > > _______________________________________________ > > Mailing list: https://launchpad.net/~kicad-developers > > Post to : kicad-developers@lists.launchpad.net > > Unsubscribe : https://launchpad.net/~kicad-developers > > More help : https://help.launchpad.net/ListHelp > > > > _______________________________________________ > Mailing list: https://launchpad.net/~kicad-developers > Post to : kicad-developers@lists.launchpad.net > Unsubscribe : https://launchpad.net/~kicad-developers > More help : https://help.launchpad.net/ListHelp >
_______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : kicad-developers@lists.launchpad.net Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp