Please find the attached patch for this issue.

On Tue, Feb 13, 2018 at 2:34 AM Maciej Sumiński <maciej.sumin...@cern.ch>
wrote:

> Hi Russell,
>
> On 02/11/2018 05:41 AM, Russell Oliver wrote:
> > Hi All,
> >
> > I've discovered the cause of a problem when importing Eagle Projects and
> > getting the schematic and boards synced.
> >
> > Currently when importing an Eagle schematic, labels for nets that are
> only
> > found one Eagle sheet are imported as local KiCad labels. This preserves
> > the visual design of the schematic some what. For eagle schematics with
> > more than 1 sheet, where hierarchical sheets are created in Kicad, global
> > labels are created to tie the nets together across the sheets the same as
> > Eagle due to its lack of scopes for net names.
> >
> > The problem is that the imported PCB will have net names that are global
> > e.g "VBUS" while the imported schematic may end up with local netname for
> > the root sheet e.g "/VBUS". This will cause errors for boards with zones
> > and named vias with the original/global netname e.g."VBUS"
> >
> > My proposal to fix this is to create another pass in the netlist
> generation
> > code that would remove the forward slash '/' for unique local nets in the
> > root sheet provided it does not clash with an existing net name.
>
> Good catch. I would rather not modify the netlist generator code, but
> add another pass in the board importer. I suggest the following:
> - Move netlist generation from kicad/import_project.cpp to
> SCH_EDIT_FRAME::ImportFile().
> - Move netlist import from kicad/import_project.cpp to
> PCB_EDIT_FRAME::ImportFile().
> - After importing a board and its netlist, go through the list of zones
> and try to assign '/' + zone->GetNetname(). If such netlist exists, then
> it means the assigned net is a local one and needs renaming. The only
> problem here is a potential conflict if there exist both 'netname'
> (local label) and '/netname' (global label). I guess such case deserves
> a huge warning, so the user needs to verify the import result.
>
> I suppose the last special case should be simply reported by the ERC
> even without importing a project, as it creates a connection between two
> seemingly not related nets.
>
> Thoughts?
>
> Regards,
> Orson
>
> > Kind Regards
> > Russell
> >
> >
> > P.S During debugging this issue, I discovered that a local label and
> global
> > label of the same name on the same sheet are connected regardless of any
> > wires. Which if there is a hierarchical sheet can lead to the same net
> for
> > 2 wire segments on separate sheets connected only to local labels, if the
> > identical global label is somewhere else on both sheets. Is this the
> > expected behaviour? or just a side effect?
> >
>
>
>

Attachment: 0001-Eagle-Schematic-Import-Fix-netlist-mapping-for-zones.patch
Description: Binary data

_______________________________________________
Mailing list: https://launchpad.net/~kicad-developers
Post to     : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Reply via email to