Hi Miles,

I use archlinux and used this AUR package to install phoenix,
https://aur.archlinux.org/cgit/aur.git/tree/PKGBUILD?h=python-wxpython-phoenix

Then I applied your patch and added that header file to kicad as shown on
https://github.com/nickoe/kicad-source-mirror/compare/master...nickoe:diffs_for_phoenix

Then I think I just hit cmake; make

Nick

2018-02-22 11:16 GMT+01:00 miles mccoo <m...@mmccoo.com>:

> So I'd like to help out and take a look, but getting wxphoenix with gtk2
> is proving a bit challenging. I did manage to install something (albeit the
> wrong one) in the past.
>
> Nick, what command did you use to install?
>
>
> Miles
>
>
> I have a fresh virtual ubuntu 16.04 install.
>
> I think I ran my normal pkg installs.
>
> sudo apt-get -y install libwxgtk3.0-0v5 libglew-dev libcairo2-dev libbz2-dev 
> doxygen libssl-dev libboost-dev libboost-thread-dev libboost-context-dev 
> libboost-filesystem-dev libboost-iostreams-dev libboost-locale-dev 
> libboost-program-options-dev swig python-wxgtk3.0* git cmake libwxgtk3.0 
> libglm-dev libcurl3 libcurl3-dev python-dev
>
>
> I ran the installs recommended on the wxpython page
> sudo apt install  dpkg-dev build-essential libjpeg-dev libtiff-dev
> libsdl1.2-dev libgstreamer-plugins-base0.10-dev libnotify-dev freeglut3
> freeglut3-dev libsm-dev
>
> sudo apt-get -y install libwxgtk3.0-0v5 libglew-dev libcairo2-dev libbz2-dev 
> doxygen libssl-dev libboost-dev libboost-thread-dev libboost-context-dev 
> libboost-filesystem-dev libboost-iostreams-dev libboost-locale-dev 
> libboost-program-options-dev swig python-wxgtk3.0* git cmake libwxgtk3.0 
> libglm-dev libcurl3 libcurl3-dev python-dev
>
> I later removed wx with gtk3 which was somehow part of my standard installs
>
> sudo apt remove libwxgtk3.0
> sudo apt remove python-wxgtk3.0*
>
>
> sudo apt-get install libgtk2.0-dev
> sudo apt install libwebkitgtk-dev
>
> wget https://wxpython.org/Phoenix/snapshot-builds/wxPython-4.0.
> 2a1.dev3684+086967a.tar.gz
>
> sudo pip install --upgrade --pre -f wxPython-4.0.2a1.dev3684+086967a.tar.gz
> wxPython
>
>
> I get a bunch of spew including these:
>
>     Configure options: ['--enable-unicode', '--with-gtk=3',
> '--with-opengl', '--enable-sound', '--enable-graphics_ctx',
> '--enable-mediactrl', '--enable-display', '--enable-geometry',
> '--enable-debug_flag', '--enable-optimise', '--disable-debugreport',
> '--enable-uiactionsim', '--with-sdl']
>     /tmp/pip-build-W4npQK/wxPython/ext/wxWidgets/configure
> --enable-unicode --with-gtk=3 --with-opengl --enable-sound
> --enable-graphics_ctx --enable-mediactrl --enable-display --enable-geometry
> --enable-debug_flag --enable-optimise --disable-debugreport
> --enable-uiactionsim --with-sdl
>
>
>    checking for GTK+ - version >= 3.0.0... Package gtk+-3.0 was not found
> in the pkg-config search path.
>     Perhaps you should add the directory containing `gtk+-3.0.pc'
>     to the PKG_CONFIG_PATH environment variable
>     No package 'gtk+-3.0' found
>     no
>     *** Could not run GTK+ test program, checking why...
>     *** The test program failed to compile or link. See the file
> config.log for the
>     *** exact error that occured. This usually means GTK+ is incorrectly
> installed.
>     configure: error:
>     The development files for GTK+ were not found. For GTK+ 2, please
>     ensure that pkg-config is in the path and that gtk+-2.0.pc is
>     installed. For GTK+ 1.2 please check that gtk-config is in the path,
>     and that the version is 1.2.3 or above. Also check that the
>     libraries returned by 'pkg-config gtk+-2.0 --libs' or 'gtk-config
>     --libs' are in the LD_LIBRARY_PATH or equivalent.
>
>
>
> pkg-config seems to be ok
> pkg-config gtk+-2.0 --libs
> -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo
> -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0
> -lglib-2.0 -lfontconfig -lfreetype
>
>
>
>
>
>
>
> On Fri, Feb 16, 2018 at 8:13 PM, Carsten Schoenert <
> c.schoen...@t-online.de> wrote:
>
>> Hello Wayne,
>>
>> as Nick has written about a different part in this thread ...
>>
>> Am 24.11.17 um 14:00 schrieb Wayne Stambaugh:
>> > I'm surprised there is no RFP for phoenix yet given that it will (has)
>> > become the replacement for wxpython.  wxpython is a dead code base as
>> > far as I know.  I certainly can create an RFP for phoenix but I am in no
>> > position to actually help with the packaging.
>>
>> Everybody can open up a RFP in Debian, so $somebody just needs to it. :-)
>>
>> But, in the between time a ITP (Intent To Package) was opened for
>> wxpython4.0 [1] some days ago. And since a few days a prepared binary
>> package set is waiting in NEW [2] to get processed by the FTP Masters.
>> So there is some light out there. ;)
>>
>> The upload was addressed into unstable so it should get into unstable
>> and a few days later into testings once it gets accepted.
>>
>> [1] https://bugs.debian.org/888554
>> [2] https://ftp-master.debian.org/new/wxpython4.0_4.0.1+dfsg-1.html
>>
>> --
>> Regards
>> Carsten Schoenert
>>
>> _______________________________________________
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to     : kicad-developers@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help   : https://help.launchpad.net/ListHelp
>>
>
>
> _______________________________________________
> Mailing list: https://launchpad.net/~kicad-developers
> Post to     : kicad-developers@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
>
>
_______________________________________________
Mailing list: https://launchpad.net/~kicad-developers
Post to     : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Reply via email to