The hole is displayed and I can select/move it.

On Mon, Apr 16, 2018 at 9:39 PM, Michael McCormack <m...@artpoe.com> wrote:

> Which version of not seeing the problem -
>
>    1. The hole is displayed
>    2. The hole gets dropped for the PCB file
>
> just curious
>
> Mike
>
> On Mon, Apr 16, 2018 at 9:30 PM, Jon Evans <j...@craftyjon.com> wrote:
>
>> I tested on Ubuntu and Windows 10 using 5.0rc2 and don't see the problem,
>> so I guess it has been fixed somewhere along the way.
>>
>> On Mon, Apr 16, 2018 at 8:12 PM, Michael McCormack <m...@artpoe.com>
>> wrote:
>>
>>> OK, here is the boar file, if you need anything else, please let me know.
>>>
>>> On Mon, Apr 16, 2018 at 6:09 PM, Jeff Young <j...@rokeby.ie> wrote:
>>>
>>>> Looks like a different bug (2.9mm drill is smaller than 3.2mm pad).
>>>>
>>>> I can’t reproduce it on 5.0rc2 Mac.  Not sure if that’s because it’s
>>>> fixed in 5.0, or it only shows up on Windows, or it’s something specific to
>>>> Michael’s setup.
>>>>
>>>>
>>>> On 16 Apr 2018, at 22:44, Michael McCormack <m...@artpoe.com> wrote:
>>>>
>>>> This is the module snipped from the board file:
>>>>
>>>>   (module Ori:MountingHole_3.2mm_M3_ISO14580 (layer F.Cu) (tedit
>>>> 59C8FBCE) (tstamp 5AC4E91C)
>>>>     (at 138.25 141.050001)
>>>>     (descr "Mounting Hole 3.2mm, no annular, M3, ISO14580")
>>>>     (tags "mounting hole 3.2mm no annular m3 iso14580")
>>>>     (path /583B5C0A)
>>>>     (fp_text reference M1 (at 0 -3.75) (layer F.SilkS) hide
>>>>       (effects (font (size 1 1) (thickness 0.15)))
>>>>     )
>>>>     (fp_text value "M3_Mounting Hole" (at 0 3.75) (layer F.Fab)
>>>>       (effects (font (size 1 1) (thickness 0.15)))
>>>>     )
>>>>     (fp_circle (center 0 0) (end 2.75 0) (layer Cmts.User) (width 0.15))
>>>>     (fp_circle (center 0 0) (end 3 0) (layer F.CrtYd) (width 0.05))
>>>>     (pad "" np_thru_hole circle (at 0 0) (size 3.2 3.2) (drill 2.9)
>>>> (layers *.Cu *.Mask)
>>>>       (clearance 2))
>>>>   )
>>>>
>>>> I am using 4.0.7 under Windows 10, if you decode this is the known bug
>>>> I sincerely apologize for having wasted your time.  I did not see a bug
>>>> that I thought was the same thing.  If not, I will mail it to any and all
>>>> of you to look at.  I won't obfuscate, I'd be afraid to disturb the
>>>> problem.  I see no real problem sharing the board with Kicad developers but
>>>> can also understand why my employer is not keen to have our boards posted
>>>> on the internet.
>>>>
>>>> Cheers
>>>> Mike
>>>>
>>>>
>>>> On Mon, Apr 16, 2018 at 5:13 PM, Jon Evans <j...@craftyjon.com> wrote:
>>>>
>>>>> That sounds like a bug (if there is invalid data like that, we should
>>>>> deal with it in a better way)
>>>>> It sounds like it might be easy to make a trivial test case to attach
>>>>> to a bug report without using your employer's board as-is
>>>>> (maybe by removing everything manually from the kicad_pcb file except
>>>>> for the hole in question and the board outline?)
>>>>>
>>>>> I can't take a look at this right this moment, but I could in the next
>>>>> few days if no one else jumps on it first.
>>>>>
>>>>> -Jon
>>>>>
>>>>> On Mon, Apr 16, 2018 at 4:35 PM, Michael McCormack <m...@artpoe.com>
>>>>> wrote:
>>>>>
>>>>>> This might not be quite the right place to post this, but, I've found
>>>>>> something that is a slightly problematic with Kicad and board file.  I 
>>>>>> have
>>>>>> a PCB that has a NPH hole located off the board, I can't see it or select
>>>>>> it inside PCBNew, however, it gets a hole in the gerbers and I can find 
>>>>>> it
>>>>>> in the kicad_pcb file if I open the file with a text editor.
>>>>>>
>>>>>> As it is my employer's board, I can't see them being OK with me
>>>>>> creating a bug report and posting the board file for just anyone to see;
>>>>>> but, as I have used Kicad myself probably a decade I'd send it to someone
>>>>>> to evaluate if it would help the project.
>>>>>>
>>>>>> Is anyone interested?
>>>>>>
>>>>>> _______________________________________________
>>>>>> Mailing list: https://launchpad.net/~kicad-developers
>>>>>> Post to     : kicad-developers@lists.launchpad.net
>>>>>> Unsubscribe : https://launchpad.net/~kicad-developers
>>>>>> More help   : https://help.launchpad.net/ListHelp
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>
_______________________________________________
Mailing list: https://launchpad.net/~kicad-developers
Post to     : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Reply via email to