Eagle is also very limited in that regard. But at least they can create a 32x32 matrix with clearances.
Converting a PCB with contraints works (except the clearance matrix), but unfortunately many of the nets in the design I converted were unnamed nets. At the first conversion from the schematic all those nets lost their netclass. I'll cleanup the patch I have, hopefully tomorrow. regards, Mark. Maciej Suminski <[email protected]> wrote: Hi Mark, I do not remember exactly how net classes work in Eagle, but if you can specify there anything that is supported by KiCad (track width, via size, etc.) then it makes sense to handle at least that part. We can implement the remaining settings as soon as the DRC receives the planned upgrade. Cheers, Orson On 1/10/19 3:56 PM, Wayne Stambaugh wrote: > Hi Mark, > > Thanks for the information. Part of version 6 development is to design > a better constraint system which netclass to netclass clearance will > most likely be included. At that point, importing this form Eagle will > make sense assuming your assessment is correct. This obviously requires > a file format change which which would violate the project policy of not > making file format changes during a stable version series. I will > change the bug report milestone to v6 unless someone else can think of a > reason to not change it. > > Cheers, > > Wayne > > On 1/10/2019 1:42 AM, [email protected] wrote: >> I just had a look at the pending buglist and saw #1754130 Eagle import >> ignores net class and net class settings. >> >> I have a patch for that, but the reason I did not post it, is because >> it is pretty useless (for me at least). Kicad does not support setting >> netclass to netclass clearances, but eagle does. Also the netnames are >> changed at the first conversion from schematic to PCB. >> >> If there still interest in this patch, I can (clean it up and) post it. >> >> regards, >> >> Mark. >> >> _______________________________________________ >> Mailing list: https://launchpad.net/~kicad-developers >> Post to : [email protected] >> Unsubscribe : https://launchpad.net/~kicad-developers >> More help : https://help.launchpad.net/ListHelp >> > > _______________________________________________ > Mailing list: https://launchpad.net/~kicad-developers > Post to : [email protected] > Unsubscribe : https://launchpad.net/~kicad-developers > More help : https://help.launchpad.net/ListHelp > _______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : [email protected] Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
