On 6/22/06, derek_noffke <[EMAIL PROTECTED]> wrote: > Hello, > > I have an input port on a micro with 8 identical input circuits. > Lets say the input circuits consist of a connector P1 resistor R1 and > input port A1. > Do I have to draw the input circuit 8 times on my schematic or is > there a way to get KiCAD to "auto number" the input circuits so that > the resistors get referenced as say R101, R102, ... R108 and the > connectors P101, P102, ... P108
There is Anotation command in EEschema just for that. Automatic anotation of elements. B. -- mag./M.Sc. Boštjan Jerko Boštjan Jerko-Japina s.p., Raziskovanje in razvoj novih tehnologij Boštjan Jerko-Japina s.p., Research and development of new technologies ******************* slovensko: http://www.japina.si blog: http://www.japina.si/blog ------------------- English: http://www.japina.eu blog: http://www.japina.eu/blog ------------------------ Yahoo! Groups Sponsor --------------------~--> See what's inside the new Yahoo! Groups email. http://us.click.yahoo.com/2pRQfA/bOaOAA/yQLSAA/W4wwlB/TM --------------------------------------------------------------------~-> Please read the Kicad FAQ in the group files section before posting your question. Please post your bug reports here. They will be picked up by the creator of Kicad. Please contribute your symbols/modules to the library folder in the group files section. For building Kicad from source and other development questions visit the kicad-devel group at http://groups.yahoo.com/group/kicad-devel Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/kicad-users/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
