roger_irwin wrote: > --- In [email protected], David Gravereaux <[EMAIL PROTECTED]> > wrote: > >> Yeah, but I'd rather do it directly. I haven't yet figured-out the > proper >> ghostscript command to do it, and would rather not jump through hoops. >> > > If you are using postscript then there **is** a "plot mirror" option > on the print menu.
That's the plot dialog, not the print dialog. >> Again, please add a mirror print option. Those iron-on sheets are > meant for laser >> printers. Eagle prints in reverse; why shouldn't KiCAD? >> > > Appears that it does! Does not! Printing top layers in reverse to the GDI printer device isn't possible. Plotting in reverse and using an external tool to get the .ps to print on the printer is possible. I would rather not have to use an external tool like GSView: http://www.cs.wisc.edu/~ghost/gsview/get48.htm > It does not offer the option for Gerber or HPGL, > but then you would not normally need them. Perhaps the real missing > feature is the lack of facilities in the Gerber viewer, but hey, this > is free beer so you have to be patient. Well, I don't use the included gerber viewer as it doesn't load drill files. I seem to be trusting gcprevue lately. I'd much rather print directly from pcbnew than post-process the other output files into a printable form. Roger, just stop telling that I don't want this. I do want this. Again, please add an option to the print dialog to print all top layers in reverse. -- panic("sun_82072_fd_inb: How did I get here?"); linux-2.2.16/include/asm-sparc/floppy.h
