Hello! If anybody is interested I've created a small python script to convert Kicad's postscript plot file to g-code for TurboCNC (I've tested the output with this program). The script and the small manual to accompany the script can be found on my page: http://www.japina.eu and you can see a sample in the blog: http://www.japina.eu/blog-eng/
B. ********************* mag./M.Sc. Boštjan Jerko Boštjan Jerko-Japina s.p., Raziskovanje in razvoj novih tehnologij Boštjan Jerko-Japina s.p., Research and development of new technologies ********************* Elektronika/Electronics, Programi/Software http://www.japina.eu slovenski blog: http://www.japina.eu/blog-slo English blog: http://www.japina.eu/blog-eng Please read the Kicad FAQ in the group files section before posting your question. Please post your bug reports here. They will be picked up by the creator of Kicad. Please contribute your symbols/modules to the library folder in the group files section. For building Kicad from source and other development questions visit the kicad-devel group at http://groups.yahoo.com/group/kicad-devel Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/kicad-users/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/kicad-users/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
