--- In [email protected], "Mark Webster" <[EMAIL PROTECTED]> wrote: > > <<Pads do not connect to ground plane i've created. > The procedure that im folling is: > > 1. Draw a zone with copper side selected. > 2. Fill this zone with Thermal and "H, V..." selected. > > After this procedure the green zone is created but ground pads are not > connected. > > What am i doing wrong?>> > > Before you flood the plane make sure you have highlighted the net you want > connected to it. > > The procedure I use is: > > 1. Select layer > > 2. Draw outline (if required) > > 3. Highlight ground (or any other) net using highlight tool > > 4. Flood layer > > > > > Regards, > > MarkW >
Thank you! Henrique
