yajeed2000 wrote:
--- In kicad-users@yahoogroups.com
<mailto:kicad-users%40yahoogroups.com>, "richmogd" <[EMAIL PROTECTED]> wrote:
>
> Hi guys,
>
> I'm almost there with my first Schematic/PCB on kicad. However, I'm
> getting stuck on the PCBNEW netlist read. I read an early version of
> the netlist to check that the modules and nets were coming in
> correctly. I've since updated the netlist to change some footprints.
> However, wehn I re-read the netlist, PCBNEW seems to be reading a
> cached version of the file. I've looked at the netlist file in a text
> editor and the file itself is ok, but PCBNEW doesn't appear to be
> reading from this file as the source. Any idea how I clear the cache
> and make sure that PCBNEW reads the new file completely?
>
> Thanks,
>
> Glenn.
>
Hi,
Have you tried opening the netlist file in CvPCB and then reimporting
the file into PCBNEW?
Please try this and see if it works.
Regards,
David.
HI
do you compile the netlist after read?
it is stupid question but it is possible
i had about a 10 corrections in a netlist and everything went right
I use "Build Version:
EESchema (2006-06-26) - Unicode version
"
