Hi Jean, Thank you for your quick and useful reply, and I has worked. I've shared your info with FreePCB users at http://www.freepcb.com/cgi-bin/gforum.cgi?post=3100 (Scroll down to bottom of the page for a post with subject " KiCAD works with FreePCB! ") for others benefit.
Cheers, Vignesh --- In kicad-users@yahoogroups.com, jean-pierre charras - INPG <[EMAIL PROTECTED]> wrote: > netlist_form_pads-pcb must be launched by eeschema because: > 1 - eeschema creates an intermediate netlist file (for myschema.sch , > eeschema creates myschema.tmp) This file is easy to convert to an other > usual netlist format. > 2 - after this, netlist_form_pads-pcb is launched, read this file and > create the pads-pcb netlist. Of course if myschema.tmp does not exists, > the pad-pcb netlist is void... > -- > Jean-Pierre CHARRAS > Maître de conférences > Directeur d'études 2ieme année. > Génie Electrique et Informatique Industrielle 2 > Institut Universitaire de Technologie 1 de Grenoble > BP 67, 38402 St Martin d'Heres Cedex > > Recherche : > Grenoble Image Parole Signal Automatique (GIPSA - INPG) > 46, Avenue Félix Viallet > 38031 Grenoble Cedex >
