Hi, I put a schematic with its EDIF output.
http://www.kondner.com/files/ps10.zip I have a copy of the spec, yes that is what I paid. Come on, what is a month of your time worth? That's cheap :-) If you can do this I will help pay for it and your time. Contact me at: [EMAIL PROTECTED] You might want to look at www.aapcb.com. I wrote all their internal code and I licensed it to them. I want to do for SCH to PCB what I did for PCB to Assembly. I like the idea of KiCAD but the required features and library structures does not make it possible to use KiCAD. Do you use Delphi? Thanks, Bob Kondner -----Original Message----- From: kicad-users@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Bob_xyz Sent: Sunday, September 16, 2007 6:46 PM To: kicad-users@yahoogroups.com Subject: [kicad-users] Re: Orcad .OLB to KICAD --- In kicad-users@yahoogroups.com, "Robert Kondner" <[EMAIL PROTECTED]> wrote: > > Hi, > > For a sample EDIF export an OrCAD schematic or library. > Unfortunately, I have no access to a system running OrCAD. > You will need the EDIF 2.0.0 documents they cost a couple hundred >dollars. > I just found the spec - OUCH, it's US$372. That's a bit more than I was planning to spend on this effort. I'll have to see if I can get access to a copy without buying one. With a few example files, though, it should be possible to figure out the basics from the files themselves. The descriptions and examples that I've seen indicate that EDIF is a fairly straightforward format. If noone in this group is able to post a few EDIF files, I'll try to get someone over on the OrCADexchange Yahoo group to post some. > If you really want to do this keep in touch, I have plans on >doing the > same at some point in the near future. > Will do. Regards, Bob Please read the Kicad FAQ in the group files section before posting your question. Please post your bug reports here. They will be picked up by the creator of Kicad. Please visit http://www.kicadlib.org for details of how to contribute your symbols/modules to the kicad library. For building Kicad from source and other development questions visit the kicad-devel group at http://groups.yahoo.com/group/kicad-devel Yahoo! Groups Links
