On 1 Jul 2008 at 18:47, Pedro Martín wrote: > Hi, > > I think that none of the choices. > PCBnew does not remove anything from the netlist. This is to prevent removing > of parts not in the netlist such as holes. > Components should be removed from the very pcbnew design. > > Pedro. > > > Having made a new revision af a print I have exchanged a few > > components, and some components are out of the design for good. Is > > there any way of making PCBNEW automatically remove components not in > > the "new" updated net list? Or do I have to remove them by going > > through the list? > > Any help will be appreciated. > > Andreas Assuming you made the net list in EESchema, remove the component in EESchema then save the netlist. That will remove the component. Then in PCBNew, re-read the netlist. You will have to manually remove the component from the board. If you do a module check after re-reading the net-list, components removed from the netlist but still on the board will be listed. That will keep the schematic and the board layout in sync.
Dave - WB6dhw <http://wb6dhw.com>
